From: Dave Jiang <dave.jiang@intel.com>
To: Dan Williams <dan.j.williams@intel.com>, linux-cxl@vger.kernel.org
Cc: vishal.l.verma@intel.com, ira.weiny@intel.com,
alison.schofield@intel.com, Jonathan.Cameron@huawei.com
Subject: Re: [PATCH 1/3] cxl: Add check for result of interleave ways plus granularity combo
Date: Thu, 11 Aug 2022 16:18:46 -0700 [thread overview]
Message-ID: <685f101b-60d7-1b53-fa16-e89fd83163a2@intel.com> (raw)
In-Reply-To: <62f288f1cb88a_1f18b2943a@dwillia2-xfh.jf.intel.com.notmuch>
On 8/9/2022 9:18 AM, Dan Williams wrote:
> Dave Jiang wrote:
>> Add a helper function to check the combination of interleave ways and
>> interleave granularity together is sane against the interleave mask from
>> the HDM decoder. Add the check to cxl_region_attach() to make sure the
>> region config is sane. Add the check to cxl_port_setup_targets() to make
>> sure the port setup config is also sane.
>>
>> Calculation refers to CXL spec v3 8.2.4.19.13 implementation note #3.
>>
>> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
>> ---
>> drivers/cxl/core/region.c | 17 ++++++++++++++++-
>> drivers/cxl/cxl.h | 11 +++++++++++
>> drivers/cxl/cxlmem.h | 31 +++++++++++++++++++++++++++++++
>> 3 files changed, 58 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
>> index cf5d5811fe4c..a209a8de31fd 100644
>> --- a/drivers/cxl/core/region.c
>> +++ b/drivers/cxl/core/region.c
>> @@ -1081,6 +1081,13 @@ static int cxl_port_setup_targets(struct cxl_port *port,
>> return rc;
>> }
>>
>> + rc = cxl_interleave_verify(port, iw, ig);
> There are multiple "interleave verify" actions, this function is just
> handling the interleave address bit capability, so how about:
>
> s/cxl_interleave_verify/cxl_interleave_capable/
ok
>
>> + if (rc) {
>> + dev_dbg(&cxlr->dev, "%s:%s: invalid interleave & granularity combo: %d\n",
> If this fires I would want to know the iw and ig settings, something
> like:
>
> "%s:%s interleave (ig: %d iw: %d mask: %#x) exceeds capability (mask: %#x)\n"
>
> Likely that message would need to move internal to
> cxl_interleave_capable() where you have the address masks available.
Will move it internally
>
>
>> + dev_name(port->uport), dev_name(&port->dev), rc);
>> + return rc;
>> + }
>> +
>> cxld->interleave_ways = iw;
>> cxld->interleave_granularity = ig;
>> dev_dbg(&cxlr->dev, "%s:%s iw: %d ig: %d\n", dev_name(port->uport),
>> @@ -1218,6 +1225,15 @@ static int cxl_region_attach(struct cxl_region *cxlr,
>> return -EBUSY;
>> }
>>
>> + ep_port = cxled_to_port(cxled);
>> + rc = cxl_interleave_verify(ep_port, p->interleave_ways,
>> + p->interleave_granularity);
>> + if (rc) {
>> + dev_dbg(&cxlr->dev, "%s: invalid interleave & granularity combo: %d\n",
>> + dev_name(&cxlmd->dev), rc);
> ...and then you don't need to duplicate the message if it is internal to
> cxl_interleave_capable().
>
>> + return rc;
>> + }
>> +
>> for (i = 0; i < p->interleave_ways; i++) {
>> struct cxl_endpoint_decoder *cxled_target;
>> struct cxl_memdev *cxlmd_target;
>> @@ -1236,7 +1252,6 @@ static int cxl_region_attach(struct cxl_region *cxlr,
>> }
>> }
>>
>> - ep_port = cxled_to_port(cxled);
>> root_port = cxlrd_to_port(cxlrd);
>> dport = cxl_find_dport_by_dev(root_port, ep_port->host_bridge);
>> if (!dport) {
>> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
>> index bc604b7e44fb..275979fbd15a 100644
>> --- a/drivers/cxl/cxl.h
>> +++ b/drivers/cxl/cxl.h
>> @@ -61,6 +61,17 @@
>> #define CXL_HDM_DECODER0_SKIP_LOW(i) CXL_HDM_DECODER0_TL_LOW(i)
>> #define CXL_HDM_DECODER0_SKIP_HIGH(i) CXL_HDM_DECODER0_TL_HIGH(i)
>>
>> +enum {
>> + CXL_INTERLEAVE_1_WAY = 0,
>> + CXL_INTERLEAVE_2_WAY,
>> + CXL_INTERLEAVE_4_WAY,
>> + CXL_INTERLEAVE_8_WAY,
>> + CXL_INTERLEAVE_16_WAY,
>> + CXL_INTERLEAVE_3_WAY = 8,
>> + CXL_INTERLEAVE_6_WAY,
>> + CXL_INTERLEAVE_12_WAY
> I'm not sure this new enum is worth it given only one of these will ever
> be used.
Will remove
>
>> +};
>> +
>> static inline int cxl_hdm_decoder_count(u32 cap_hdr)
>> {
>> int val = FIELD_GET(CXL_HDM_DECODER_COUNT_MASK, cap_hdr);
>> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
>> index 88e3a8e54b6a..d5f872ca62f9 100644
>> --- a/drivers/cxl/cxlmem.h
>> +++ b/drivers/cxl/cxlmem.h
>> @@ -401,6 +401,37 @@ struct cxl_hdm {
>> struct cxl_port *port;
>> };
>>
>> +static inline int cxl_interleave_verify(struct cxl_port *port,
>> + int ways, int granularity)
>> +{
>> + struct cxl_hdm *cxlhdm = dev_get_drvdata(&port->dev);
>> + unsigned int addr_mask;
>> + u16 ig;
>> + u8 iw;
>> + int rc;
>> +
>> + rc = granularity_to_cxl(granularity, &ig);
>> + if (rc)
>> + return rc;
>> +
>> + rc = ways_to_cxl(ways, &iw);
>> + if (rc)
>> + return rc;
>> +
>> + if (iw == 0)
>> + return 0;
>> +
>> + if (iw < CXL_INTERLEAVE_3_WAY)
> ...just do "is_power_of_2(iw)" here instead.
ok
>
>> + addr_mask = GENMASK(ig + 8 + iw - 1, ig + 8);
>> + else
>> + addr_mask = GENMASK((ig + iw) / 3 - 1, ig + 8);
next prev parent reply other threads:[~2022-08-11 23:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-08 21:06 [PATCH 0/3] Add sanity check for interleave setup Dave Jiang
2022-08-08 21:06 ` [PATCH 1/3] cxl: Add check for result of interleave ways plus granularity combo Dave Jiang
2022-08-09 16:18 ` Dan Williams
2022-08-11 23:18 ` Dave Jiang [this message]
2022-08-09 17:06 ` Alison Schofield
2022-08-11 23:33 ` Dave Jiang
2022-08-08 21:07 ` [PATCH 2/3] cxl: Add CXL spec v3.0 interleave support Dave Jiang
2022-08-09 16:20 ` Dan Williams
2022-08-11 23:19 ` Dave Jiang
2022-08-08 21:07 ` [PATCH 3/3] tools/testing/cxl: Add interleave check support to mock cxl port device Dave Jiang
2022-08-09 16:21 ` Dan Williams
2022-08-11 23:22 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=685f101b-60d7-1b53-fa16-e89fd83163a2@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox