From: Serge Semin <fancer.lancer@gmail.com>
To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: jingoohan1@gmail.com, mani@kernel.org,
gustavo.pimentel@synopsys.com, lpieralisi@kernel.org,
robh+dt@kernel.org, kw@linux.com, bhelgaas@google.com,
kishon@kernel.org, marek.vasut+renesas@gmail.com,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v16 20/22] PCI: rcar-gen4-ep: Add R-Car Gen4 PCIe Endpoint support
Date: Mon, 5 Jun 2023 18:06:13 +0300 [thread overview]
Message-ID: <20230605150613.gvr5ayz3bisvylap@mobilestation> (raw)
In-Reply-To: <20230510062234.201499-21-yoshihiro.shimoda.uh@renesas.com>
On Wed, May 10, 2023 at 03:22:32PM +0900, Yoshihiro Shimoda wrote:
> Add R-Car Gen4 PCIe Endpoint support. This controller is based on
> Synopsys DesignWare PCIe.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
> drivers/pci/controller/dwc/Kconfig | 9 +
> drivers/pci/controller/dwc/Makefile | 2 +
> .../pci/controller/dwc/pcie-rcar-gen4-ep.c | 166 ++++++++++++++++++
> 3 files changed, 177 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4-ep.c
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 64d4d37bc891..4d877cd18374 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -424,4 +424,13 @@ config PCIE_RCAR_GEN4
> Say Y here if you want PCIe host controller support on R-Car Gen4 SoCs.
> This uses the DesignWare core.
>
> +config PCIE_RCAR_GEN4_EP
> + tristate "Renesas R-Car Gen4 PCIe Endpoint controller"
> + depends on ARCH_RENESAS || COMPILE_TEST
> + depends on PCI_ENDPOINT
> + select PCIE_DW_EP
> + help
> + Say Y here if you want PCIe endpoint controller support on R-Car Gen4
> + SoCs. This uses the DesignWare core.
> +
> endmenu
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index 486cf706b53d..0fb0bde26ac4 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -28,6 +28,8 @@ obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
> pcie-rcar-gen4-host-drv-objs := pcie-rcar-gen4.o pcie-rcar-gen4-host.o
> obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4-host-drv.o
> +pcie-rcar-gen4-ep-drv-objs := pcie-rcar-gen4.o pcie-rcar-gen4-ep.o
> +obj-$(CONFIG_PCIE_RCAR_GEN4_EP) += pcie-rcar-gen4-ep-drv.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4-ep.c b/drivers/pci/controller/dwc/pcie-rcar-gen4-ep.c
> new file mode 100644
> index 000000000000..710bbc9e61a5
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4-ep.c
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * PCIe Endpoint driver for Renesas R-Car Gen4 Series SoCs
> + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +#include "pcie-rcar-gen4.h"
> +#include "pcie-designware.h"
> +
> +static void rcar_gen4_pcie_ep_pre_init(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *dw = to_dw_pcie_from_ep(ep);
> + struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> + u8 val;
> +
> + rcar_gen4_pcie_set_device_type(rcar, false, dw->num_lanes);
> +
> + dw_pcie_dbi_ro_wr_en(dw);
> +
> + /* Single function */
> + val = dw_pcie_readb_dbi(dw, PCI_HEADER_TYPE);
> + val &= ~PCI_HEADER_TYPE_MULTI_FUNC;
> + dw_pcie_writeb_dbi(dw, PCI_HEADER_TYPE, val);
Just wondering. Did you try to implement the multi-function-ness
support? It don't seem to be much problematic (implementing
func_conf_select() callback and possibly some trick to distinguish dbi
and dbi2 spaces).
BTW based on your End-point DT-bindings the "max-functions" property
is permitted to have value 2. Thus your platforms may have both functions
activated and exposed to user-space meanwhile your driver doesn't seem
to support it...
-Serge(y)
> +
> + dw_pcie_dbi_ro_wr_dis(dw);
> +
> + writel(PCIEDMAINTSTSEN_INIT, rcar->base + PCIEDMAINTSTSEN);
> +}
> +
> +static void rcar_gen4_pcie_ep_deinit(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *dw = to_dw_pcie_from_ep(ep);
> + struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> +
> + writel(0, rcar->base + PCIEDMAINTSTSEN);
> +}
> +
> +static int rcar_gen4_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> + enum pci_epc_irq_type type,
> + u16 interrupt_num)
> +{
> + struct dw_pcie *dw = to_dw_pcie_from_ep(ep);
> +
> + switch (type) {
> + case PCI_EPC_IRQ_INTX:
> + return dw_pcie_ep_raise_intx_irq(ep, func_no);
> + case PCI_EPC_IRQ_MSI:
> + return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> + default:
> + dev_err(dw->dev, "Unknown IRQ type\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct pci_epc_features rcar_gen4_pcie_epc_features = {
> + .linkup_notifier = false,
> + .msi_capable = true,
> + .msix_capable = false,
> + .reserved_bar = 1 << BAR_5,
> + .align = SZ_1M,
> +};
> +
> +static const struct pci_epc_features*
> +rcar_gen4_pcie_ep_get_features(struct dw_pcie_ep *ep)
> +{
> + return &rcar_gen4_pcie_epc_features;
> +}
> +
> +static const struct dw_pcie_ep_ops pcie_ep_ops = {
> + .ep_pre_init = rcar_gen4_pcie_ep_pre_init,
> + .ep_deinit = rcar_gen4_pcie_ep_deinit,
> + .raise_irq = rcar_gen4_pcie_ep_raise_irq,
> + .get_features = rcar_gen4_pcie_ep_get_features,
> +};
> +
> +static int rcar_gen4_add_pcie_ep(struct rcar_gen4_pcie *rcar,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie_ep *ep = &rcar->dw.ep;
> + int ret;
> +
> + ep->ops = &pcie_ep_ops;
> +
> + ret = dw_pcie_ep_init(ep);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to initialize endpoint\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void rcar_gen4_remove_pcie_ep(struct rcar_gen4_pcie *rcar)
> +{
> + dw_pcie_ep_exit(&rcar->dw.ep);
> +}
> +
> +static int rcar_gen4_pcie_ep_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct rcar_gen4_pcie *rcar;
> + int err;
> +
> + rcar = rcar_gen4_pcie_devm_alloc(dev);
> + if (!rcar)
> + return -ENOMEM;
> +
> + err = rcar_gen4_pcie_get_resources(rcar, pdev);
> + if (err < 0) {
> + dev_err(dev, "Failed to request resource: %d\n", err);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, rcar);
> +
> + err = rcar_gen4_pcie_prepare(rcar);
> + if (err < 0)
> + return err;
> +
> + err = rcar_gen4_add_pcie_ep(rcar, pdev);
> + if (err < 0)
> + goto err_add;
> +
> + return 0;
> +
> +err_add:
> + rcar_gen4_pcie_unprepare(rcar);
> +
> + return err;
> +}
> +
> +static int rcar_gen4_pcie_ep_remove(struct platform_device *pdev)
> +{
> + struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
> +
> + rcar_gen4_remove_pcie_ep(rcar);
> + rcar_gen4_pcie_unprepare(rcar);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rcar_gen4_pcie_of_match[] = {
> + { .compatible = "renesas,rcar-gen4-pcie-ep", },
> + {},
> +};
> +
> +static struct platform_driver rcar_gen4_pcie_ep_driver = {
> + .driver = {
> + .name = "pcie-rcar-gen4-ep",
> + .of_match_table = rcar_gen4_pcie_of_match,
> + },
> + .probe = rcar_gen4_pcie_ep_probe,
> + .remove = rcar_gen4_pcie_ep_remove,
> +};
> +module_platform_driver(rcar_gen4_pcie_ep_driver);
> +
> +MODULE_DESCRIPTION("Renesas R-Car Gen4 PCIe endpoint controller driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
next prev parent reply other threads:[~2023-06-05 15:06 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-10 6:22 [PATCH v16 00/22] PCI: rcar-gen4: Add R-Car Gen4 PCIe support Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 01/22] PCI: Add PCI_EXP_LNKCAP_MLW macros Yoshihiro Shimoda
2023-06-04 22:50 ` Serge Semin
2023-06-05 0:14 ` Yoshihiro Shimoda
2023-06-05 0:25 ` Serge Semin
2023-06-05 1:38 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 02/22] PCI: Add PCI_HEADER_TYPE_MULTI_FUNC Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 03/22] PCI: Add INTx Mechanism Messages macros Yoshihiro Shimoda
2023-06-04 23:07 ` Serge Semin
2023-06-05 2:10 ` Yoshihiro Shimoda
2023-06-05 7:24 ` Serge Semin
2023-06-05 7:53 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 04/22] PCI: Rename PCI_EPC_IRQ_LEGACY to PCI_EPC_IRQ_INTX Yoshihiro Shimoda
2023-06-04 23:22 ` Serge Semin
2023-06-05 2:16 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 05/22] PCI: dwc: Rename "legacy_irq" to "INTx_irq" Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 06/22] PCI: dwc: Change arguments of dw_pcie_prog_outbound_atu() Yoshihiro Shimoda
2023-06-04 23:56 ` Serge Semin
2023-07-04 5:18 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 07/22] PCI: dwc: Add outbound MSG TLPs support Yoshihiro Shimoda
2023-06-05 0:15 ` Serge Semin
2023-07-04 5:22 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 08/22] PCI: designware-ep: Add INTx IRQs support Yoshihiro Shimoda
2023-06-05 8:05 ` Serge Semin
2023-06-06 9:20 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 09/22] PCI: dwc: Add dw_pcie_link_set_max_link_width() Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 10/22] PCI: dwc: Modify PCIE_PORT_LINK_CONTROL handling Yoshihiro Shimoda
2023-06-05 10:53 ` Serge Semin
2023-06-06 9:28 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 11/22] PCI: dwc: Add dw_pcie_link_set_max_cap_width() Yoshihiro Shimoda
2023-06-05 10:58 ` Serge Semin
2023-06-06 9:32 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 12/22] PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting Yoshihiro Shimoda
2023-06-05 11:06 ` Serge Semin
2023-05-10 6:22 ` [PATCH v16 13/22] PCI: dwc: Add EDMA_UNROLL capability flag Yoshihiro Shimoda
2023-06-05 11:15 ` Serge Semin
2023-06-06 9:37 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 14/22] PCI: dwc: Expose dw_pcie_ep_exit() to module Yoshihiro Shimoda
2023-06-05 11:28 ` Serge Semin
2023-05-10 6:22 ` [PATCH v16 15/22] PCI: dwc: Introduce .ep_pre_init() and .ep_deinit() Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 16/22] dt-bindings: PCI: dwc: Update maxItems of reg and reg-names Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 17/22] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host Yoshihiro Shimoda
2023-05-10 10:03 ` Krzysztof Kozlowski
2023-05-11 0:27 ` Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 18/22] dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint Yoshihiro Shimoda
2023-05-10 10:03 ` Krzysztof Kozlowski
2023-05-11 0:23 ` Yoshihiro Shimoda
2023-05-11 5:03 ` Krzysztof Kozlowski
2023-06-05 14:50 ` Serge Semin
2023-05-10 6:22 ` [PATCH v16 19/22] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support Yoshihiro Shimoda
2023-06-05 14:39 ` Serge Semin
2023-06-07 2:59 ` Yoshihiro Shimoda
2023-06-07 12:15 ` Serge Semin
2023-06-08 8:47 ` Yoshihiro Shimoda
2023-06-08 12:11 ` Serge Semin
2023-06-09 6:29 ` Yoshihiro Shimoda
2023-06-09 10:54 ` Serge Semin
2023-06-12 13:19 ` Yoshihiro Shimoda
2023-06-12 19:51 ` Serge Semin
2023-06-14 2:30 ` Yoshihiro Shimoda
2023-06-14 11:39 ` Serge Semin
2023-06-14 19:31 ` Serge Semin
2023-06-20 12:02 ` Yoshihiro Shimoda
2023-06-20 12:36 ` Serge Semin
2023-05-10 6:22 ` [PATCH v16 20/22] PCI: rcar-gen4-ep: Add R-Car Gen4 PCIe Endpoint support Yoshihiro Shimoda
2023-06-05 15:06 ` Serge Semin [this message]
2023-05-10 6:22 ` [PATCH v16 21/22] MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4 Yoshihiro Shimoda
2023-05-10 6:22 ` [PATCH v16 22/22] misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller Yoshihiro Shimoda
2023-05-31 11:29 ` [PATCH v16 00/22] PCI: rcar-gen4: Add R-Car Gen4 PCIe support Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230605150613.gvr5ayz3bisvylap@mobilestation \
--to=fancer.lancer@gmail.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=marek.vasut+renesas@gmail.com \
--cc=robh+dt@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox