public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Yao Zi <ziyao@disroot.org>, Chukun Pan <amadeus@jmu.edu.cn>,
	devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>
Subject: [PATCH 0/3] arm64: dts: rockchip: Add Radxa E24C
Date: Sun, 27 Jul 2025 14:44:00 +0000	[thread overview]
Message-ID: <20250727144409.327740-1-jonas@kwiboo.se> (raw)

This series adds dt-bindings and initial device tree for the Radxa E24C.

The product page for E24C mentions that onboard eMMC is optional and the
model I have come with SPI flash instead of eMMC.

On RK3528 the eMMC and SPI flash is muxed so only one of them can work.

I have included both SPI flash and eMMC nodes in the device tree,
however the sdhci node has been marked with status=fail. Something that
possible could be enabled using a DTBO or FDT fixup by the bootloader.

This also leaves out describing the RTL8367RB-VB switch as support for
the switch requires dt-binding and/or driver changes to make it work,
something that will be handled in a separate follow-up series.

This board can be booted from SD-card using the U-Boot 2025.07
generic-rk3528 target or preferably using work-in-progress patches [1].

This series depends on following series for a clean apply:
- arm64: dts: rockchip: Add ROCK 2A/2F, Sige1 and NanoPi Zero2 [2]
- rockchip: Add power controller support for RK3528 [3]
- rockchip: Add USB 2.0 support for RK3528 [4]

A branch with all these (and some more) patches can be found at [5].

[1] https://source.denx.de/u-boot/contributors/kwiboo/u-boot/-/commits/rk3528
[2] https://lore.kernel.org/r/20250717103720.2853031-1-jonas@kwiboo.se
[3] https://lore.kernel.org/r/20250723085654.2273324-1-jonas@kwiboo.se
[4] https://lore.kernel.org/r/20250723122323.2344916-1-jonas@kwiboo.se
[5] https://github.com/Kwiboo/linux-rockchip/commits/next-20250722-rk3528/

Jonas Karlman (3):
  arm64: dts: rockchip: Add SFC node for RK3528
  dt-bindings: arm: rockchip: Add Radxa E24C
  arm64: dts: rockchip: Add Radxa E24C

 .../devicetree/bindings/arm/rockchip.yaml     |   6 +-
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3528-radxa-e24c.dts   | 519 ++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3528.dtsi      |  12 +
 4 files changed, 536 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c.dts

-- 
2.50.1


             reply	other threads:[~2025-07-27 14:44 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-27 14:44 Jonas Karlman [this message]
2025-07-27 14:44 ` [PATCH 1/3] arm64: dts: rockchip: Add SFC node for RK3528 Jonas Karlman
2025-07-28  7:00   ` Chukun Pan
2025-07-28 16:18     ` Jonas Karlman
2025-07-27 14:44 ` [PATCH 2/3] dt-bindings: arm: rockchip: Add Radxa E24C Jonas Karlman
2025-07-28  5:48   ` Krzysztof Kozlowski
2025-07-27 14:44 ` [PATCH 3/3] arm64: dts: " Jonas Karlman
2025-07-27 16:15   ` Andrew Lunn
2025-07-27 16:26     ` Jonas Karlman
2025-07-27 16:44       ` Andrew Lunn
2025-07-28 12:50   ` Chukun Pan
2025-07-28 17:09     ` Jonas Karlman
2025-07-29 13:20       ` Chukun Pan
2025-07-29 21:15         ` Jonas Karlman
2025-08-15  4:46   ` FUKAUMI Naoki
2025-08-15 10:01     ` Chukun Pan
2025-08-18  6:17       ` FUKAUMI Naoki
2025-09-09 12:28   ` FUKAUMI Naoki
2025-09-09 14:48     ` Jonas Karlman
2025-09-09 15:39       ` Heiko Stübner
2025-09-09 19:36         ` Jonas Karlman
2025-09-10  2:43           ` FUKAUMI Naoki
2025-09-10  8:07             ` Heiko Stübner
2025-09-10  9:50               ` FUKAUMI Naoki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250727144409.327740-1-jonas@kwiboo.se \
    --to=jonas@kwiboo.se \
    --cc=amadeus@jmu.edu.cn \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=ziyao@disroot.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox