[PATCH v1 02/15] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with 10.1" display

[Vitor Soares <ivitro@gmail.com>]

From: Vitor Soares <vitor.soares@toradex.com>

Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
Toradex Capacitive Touch Display 10.1" LVDS. The adapter connects to the
Verdin DSI_1 interface. It is based on the Texas Instruments SN65DSI84
DSI-to-LVDS bridge and drives a LogicTechno LT170410-2WHC 10.1" WXGA LVDS
panel. Touch input is provided by an Atmel MaxTouch capacitive touch
controller.

Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Assisted-by: Claude:claude-sonnet-4.6
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
 arch/arm64/boot/dts/ti/Makefile               |   5 +
 ...in-dsi-to-lvds-panel-cap-touch-10inch.dtso | 135 ++++++++++++++++++
 2 files changed, 140 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 21db60cd19de..b2408f62c139 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-tqma62xx-mba62xx.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-hdmi.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev-dsi-to-hdmi.dtb
@@ -209,6 +210,9 @@ k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
 k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
+	k3-am625-verdin-wifi-dev.dtb \
+	k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 k3-am62-lp-sk-nand-dtbs := k3-am62-lp-sk.dtb k3-am62-lp-sk-nand.dtbo
 k3-am62a7-phyboard-lyra-disable-eth-phy-dtbs := k3-am62a7-phyboard-lyra-rdk.dtb \
@@ -310,6 +314,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
+	k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb \
 	k3-am62-lp-sk-hdmi-audio.dtb \
 	k3-am62-lp-sk-nand.dtb \
 	k3-am62a7-phyboard-lyra-disable-eth-phy.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso
new file mode 100644
index 000000000000..c1236f64732a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex DSI to LVDS Adapter on Verdin DSI_1 with Capacitive Touch Display 10.1"
+ * Used on Dahlia (X17) and Development Board (X48) that expose DSI_1 via an
+ * Samtec LSS-130 connector.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ * https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
+ * https://www.toradex.com/accessories/verdin-dsi-to-lvds-adapter
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+&{/} {
+	backlight_pwm3: backlight-pwm3 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_out_gpio>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin I2S_2_D_OUT as GPIO (SODIMM 46) */
+		enable-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		/* Verdin PWM_3_DSI (SODIMM 19) */
+		pwms = <&epwm1 0 6666667 PWM_POLARITY_INVERTED>;
+	};
+
+	panel-lvds-bridge {
+		compatible = "logictechno,lt170410-2whc", "panel-lvds";
+		backlight = <&backlight_pwm3>;
+		data-mapping = "vesa-24";
+		height-mm = <136>;
+		width-mm = <217>;
+
+		panel-timing {
+			clock-frequency = <71100000>;
+			de-active = <1>;
+			hactive = <1280>;
+			hback-porch = <3 40 51>;
+			hfront-porch = <43 80 91>;
+			hsync-active = <0>;
+			hsync-len = <15 40 47>;
+			pixelclk-active = <1>; /* positive edge */
+			vactive = <800>;
+			vback-porch = <5 7 10>;
+			vfront-porch = <5 7 10>;
+			vsync-active = <0>;
+			vsync-len = <6 9 12>;
+		};
+
+		port {
+			panel_lvds_bridge_in: endpoint {
+				remote-endpoint = <&dsi_lvds_bridge_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+
+		dsi_bridge_out: endpoint {
+			remote-endpoint = <&dsi_lvds_bridge_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi1_bkl_en>;
+		/* Verdin GPIO_10_DSI (SODIMM 21) - DSI_1_BKL_EN */
+		enable-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dsi_lvds_bridge_in: endpoint {
+					remote-endpoint = <&dsi_bridge_out>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				dsi_lvds_bridge_out: endpoint {
+					remote-endpoint = <&panel_lvds_bridge_in>;
+				};
+			};
+		};
+	};
+
+	touch@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi1_int>, <&pinctrl_i2s_2_bclk_gpio>;
+		/* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 IRQ_TYPE_EDGE_FALLING>;
+		/* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */
+		reset-gpios = <&main_gpio0 35 GPIO_ACTIVE_LOW>;
+	};
+};
-- 
2.54.0