Devicetree
 help / color / mirror / Atom feed
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
	 Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Richard Acayan <mailingradian@gmail.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	 David Heidelberg <david@ixit.cz>,
	 Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	devicetree@vger.kernel.org,
	 Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH v3 10/20] media: imx355: Remove redundant fll_min, and implement fixed offset
Date: Wed, 08 Jul 2026 15:48:46 +0100	[thread overview]
Message-ID: <20260708-media-imx355-v3-10-9df386a623d7@raspberrypi.com> (raw)
In-Reply-To: <20260708-media-imx355-v3-0-9df386a623d7@raspberrypi.com>

fll_min (Frame Length Lines) is set to the same value as fll_def
for all modes, which makes it redundant.

The actual value is also erroneous as the sensor works in all
the defined modes with FLL set at the mode height + 20 lines,
so set the vblank control minimum to 20 rather than varying it.
This also improves the maximum frame rate achievable.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
---
 drivers/media/i2c/imx355.c | 26 ++++----------------------
 1 file changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
index 2a97e076bff7..c6f27cf269b4 100644
--- a/drivers/media/i2c/imx355.c
+++ b/drivers/media/i2c/imx355.c
@@ -32,6 +32,7 @@
 /* V_TIMING internal */
 #define IMX355_REG_FLL			0x0340
 #define IMX355_FLL_MAX			0xffff
+#define IMX355_VBLANK_MIN		20
 
 #define IMX355_REG_LLP			0x0342
 #define IMX355_LLP_MAX			0xffff
@@ -105,7 +106,6 @@ struct imx355_mode {
 
 	/* V-timing */
 	u32 fll_def;
-	u32 fll_min;
 
 	/* H-timing */
 	u32 llp;
@@ -359,7 +359,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 0,
 		},
 		.fll_def = 2615,
-		.fll_min = 2615,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3280x2464_regs),
@@ -376,7 +375,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 8,
 		},
 		.fll_def = 2615,
-		.fll_min = 2615,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3268x2448_regs),
@@ -393,7 +391,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 8,
 		},
 		.fll_def = 2615,
-		.fll_min = 2615,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_3264x2448_regs),
@@ -410,7 +407,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 684,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1940x1096_regs),
@@ -427,7 +423,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 684,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1936x1096_regs),
@@ -444,7 +439,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 692,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1924x1080_regs),
@@ -461,7 +455,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 692,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
@@ -478,7 +471,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 0,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 1836,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640x1232_regs),
@@ -495,7 +487,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 304,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 1836,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1640x922_regs),
@@ -512,7 +503,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 496,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 1836,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1300x736_regs),
@@ -529,7 +519,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 496,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 1836,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1296x736_regs),
@@ -546,7 +535,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 512,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 1836,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1284x720_regs),
@@ -563,7 +551,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 512,
 		},
 		.fll_def = 1306,
-		.fll_min = 1306,
 		.llp = 1836,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_1280x720_regs),
@@ -580,7 +567,6 @@ static const struct imx355_mode supported_modes[] = {
 			.top = 0,
 		},
 		.fll_def = 652,
-		.fll_min = 652,
 		.llp = 3672,
 		.reg_list = {
 			.num_of_regs = ARRAY_SIZE(mode_820x616_regs),
@@ -864,7 +850,6 @@ imx355_set_pad_format(struct v4l2_subdev *sd,
 	const struct imx355_mode *mode;
 	struct v4l2_mbus_framefmt *framefmt;
 	s32 vblank_def;
-	s32 vblank_min;
 	s64 h_blank;
 	u32 height;
 
@@ -889,10 +874,9 @@ imx355_set_pad_format(struct v4l2_subdev *sd,
 		/* Update limits and set FPS to default */
 		height = imx355->cur_mode->height;
 		vblank_def = imx355->cur_mode->fll_def - height;
-		vblank_min = imx355->cur_mode->fll_min - height;
 		height = IMX355_FLL_MAX - height;
-		__v4l2_ctrl_modify_range(imx355->vblank, vblank_min, height, 1,
-					 vblank_def);
+		__v4l2_ctrl_modify_range(imx355->vblank, IMX355_VBLANK_MIN,
+					 height, 1, vblank_def);
 		__v4l2_ctrl_s_ctrl(imx355->vblank, vblank_def);
 		h_blank = mode->llp - imx355->cur_mode->width;
 		/*
@@ -1151,7 +1135,6 @@ static int imx355_init_controls(struct imx355 *imx355)
 	struct v4l2_ctrl_handler *ctrl_hdlr;
 	s64 exposure_max;
 	s64 vblank_def;
-	s64 vblank_min;
 	s64 hblank;
 	u64 pixel_rate;
 	const struct imx355_mode *mode;
@@ -1181,9 +1164,8 @@ static int imx355_init_controls(struct imx355 *imx355)
 	/* Initialize vblank/hblank/exposure parameters based on current mode */
 	mode = imx355->cur_mode;
 	vblank_def = mode->fll_def - mode->height;
-	vblank_min = mode->fll_min - mode->height;
 	imx355->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx355_ctrl_ops,
-					   V4L2_CID_VBLANK, vblank_min,
+					   V4L2_CID_VBLANK, IMX355_VBLANK_MIN,
 					   IMX355_FLL_MAX - mode->height,
 					   1, vblank_def);
 

-- 
2.34.1


  parent reply	other threads:[~2026-07-08 14:49 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-08 14:48 [PATCH v3 00/20] media/imx355: General code cleanups, and adding support for 2 lane operation Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 01/20] media: i2c: imx355: Add support for 24 MHz external clock Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 02/20] dt-bindings: media: imx355: Allow 2 CSI2 data lane output Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 03/20] media: imx355: Remove duplicated registers from the mode tables Dave Stevenson
2026-07-08 15:00   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 04/20] media: imx355: Remove setting FRM_LENGTH_LINES in the mode regs Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 05/20] media: imx355: Programmatically set the crop parameters for each mode Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 06/20] media: imx355: Set register LINE_LENGTH_PCK programmatically Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 07/20] media: imx355: Set binning mode registers programmatically Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 08/20] media: imx355: Remove link_freq_index from each mode as ununsed Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 09/20] media: imx355: pixel_rate never changes, so don't recompute Dave Stevenson
2026-07-08 15:01   ` sashiko-bot
2026-07-08 14:48 ` Dave Stevenson [this message]
2026-07-08 15:05   ` [PATCH v3 10/20] media: imx355: Remove redundant fll_min, and implement fixed offset sashiko-bot
2026-07-08 14:48 ` [PATCH v3 11/20] media: imx355: Add support for get_selection Dave Stevenson
2026-07-08 15:11   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 12/20] media: imx355: Use pm_runtime autosuspend_delay Dave Stevenson
2026-07-08 15:06   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 13/20] media: imx355: Convert to new CCI register access helpers Dave Stevenson
2026-07-08 15:08   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 14/20] media: imx355: Set the colorspace in the format Dave Stevenson
2026-07-08 15:01   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 15/20] media: imx355: Define the exposure offset, and use that define Dave Stevenson
2026-07-08 15:07   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 16/20] media: imx355: Use NULL ctrl_ops for HBLANK as it is a read-only control Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 17/20] media: imx355: Compute link frequency from PLL setup Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 18/20] media: imx355: Support 2 lane readout Dave Stevenson
2026-07-08 14:48 ` [PATCH v3 19/20] media: imx355: Switch to using the subdev state Dave Stevenson
2026-07-08 15:10   ` sashiko-bot
2026-07-08 14:48 ` [PATCH v3 20/20] media: imx355: Remove storing cur_mode in the state Dave Stevenson
2026-07-08 15:17   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260708-media-imx355-v3-10-9df386a623d7@raspberrypi.com \
    --to=dave.stevenson@raspberrypi.com \
    --cc=conor+dt@kernel.org \
    --cc=david@ixit.cz \
    --cc=devicetree@vger.kernel.org \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mailingradian@gmail.com \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox