Devicetree
 help / color / mirror / Atom feed
From: Janani Sunil <janani.sunil@analog.com>
To: "Nuno Sá" <nuno.sa@analog.com>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Olivier Moysan" <olivier.moysan@foss.st.com>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Linus Walleij" <linusw@kernel.org>,
	"Bartosz Golaszewski" <brgl@kernel.org>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Shuah Khan" <skhan@linuxfoundation.org>
Cc: <linux@analog.com>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<jananisunil.dev@gmail.com>,
	Janani Sunil <janani.sunil@analog.com>
Subject: [PATCH 5/6] gpio: ad7768: Add AD7768 GPIO auxiliary driver
Date: Thu, 9 Jul 2026 10:50:16 +0200	[thread overview]
Message-ID: <20260709-ad7768-driver-v1-5-44e1194fd96a@analog.com> (raw)
In-Reply-To: <20260709-ad7768-driver-v1-0-44e1194fd96a@analog.com>

The AD7768/AD7768-4 ADC exposes 5 general-purpose I/O pins that can be
independently configured as inputs or outputs. Add an auxiliary bus driver
to expose these pins as a GPIO chip, registered by the parent IIO driver.

The driver uses the parent's regmap for register access and delegates
runtime power management to the parent device.

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
 MAINTAINERS                |   1 +
 drivers/gpio/Kconfig       |  10 +++
 drivers/gpio/Makefile      |   1 +
 drivers/gpio/gpio-ad7768.c | 208 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 220 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index dc94e7803a7c..3de7ebcc4ee7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1639,6 +1639,7 @@ L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7768.yaml
+F:	drivers/gpio/gpio-ad7768.c
 F:	drivers/iio/adc/ad7768.c
 
 ANALOG DEVICES INC AD7780 DRIVER
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 28cf6d2e83c2..12ebbdb16982 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1796,6 +1796,16 @@ endmenu
 menu "Auxiliary Bus GPIO drivers"
 	depends on AUXILIARY_BUS
 
+config GPIO_AD7768
+	tristate "Analog Devices AD7768 GPIO support"
+	depends on AD7768 && GPIOLIB
+	help
+	  Say yes here to expose the AD7768 utility pins as GPIOs when the
+	  device tree node is marked as a GPIO controller.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called gpio-ad7768.
+
 config GPIO_LTC4283
 	tristate "Analog Devices LTC4283 GPIO support"
 	depends on SENSORS_LTC4283
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4d0e900402fc..d2921963efc7 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_GPIO_104_IDI_48)		+= gpio-104-idi-48.o
 obj-$(CONFIG_GPIO_104_IDIO_16)		+= gpio-104-idio-16.o
 obj-$(CONFIG_GPIO_74X164)		+= gpio-74x164.o
 obj-$(CONFIG_GPIO_74XX_MMIO)		+= gpio-74xx-mmio.o
+obj-$(CONFIG_GPIO_AD7768)		+= gpio-ad7768.o
 obj-$(CONFIG_GPIO_ADNP)			+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)		+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5585)		+= gpio-adp5585.o
diff --git a/drivers/gpio/gpio-ad7768.c b/drivers/gpio/gpio-ad7768.c
new file mode 100644
index 000000000000..c2f01b1abd7c
--- /dev/null
+++ b/drivers/gpio/gpio-ad7768.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices AD7768 GPIO auxiliary driver
+ *
+ * Copyright 2026 Analog Devices Inc.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#define AD7768_REG_GPIO_CONTROL		0x0E
+#define AD7768_REG_GPIO_WRITE		0x0F
+#define AD7768_REG_GPIO_READ		0x10
+
+#define AD7768_GPIO_UGPIO_ENABLE	BIT(7)
+#define AD7768_GPIO_INPUT		0x00
+#define AD7768_GPIO_OUTPUT(x)		BIT(x)
+
+#define AD7768_NUM_GPIOS		5
+
+struct ad7768_gpio_state {
+	struct device *parent;
+	struct regmap *regmap;
+	struct mutex lock; /* protects regmap accesses */
+	struct gpio_chip gc;
+};
+
+static int ad7768_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct ad7768_gpio_state *st = gpiochip_get_data(chip);
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(st->parent, pm);
+	int ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(st->regmap, AD7768_REG_GPIO_CONTROL,
+				  BIT(offset), AD7768_GPIO_INPUT);
+}
+
+static int ad7768_gpio_get_direction(struct gpio_chip *chip,
+				     unsigned int offset)
+{
+	struct ad7768_gpio_state *st = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(st->parent, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(st->regmap, AD7768_REG_GPIO_CONTROL, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(offset)) ? GPIO_LINE_DIRECTION_OUT :
+				       GPIO_LINE_DIRECTION_IN;
+}
+
+static int ad7768_gpio_direction_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct ad7768_gpio_state *st = gpiochip_get_data(chip);
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(st->parent, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = regmap_update_bits(st->regmap, AD7768_REG_GPIO_CONTROL,
+				 BIT(offset), AD7768_GPIO_OUTPUT(offset));
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(st->regmap, AD7768_REG_GPIO_WRITE,
+				  BIT(offset), value << offset);
+}
+
+static int ad7768_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ad7768_gpio_state *st = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(st->parent, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = regmap_read(st->regmap, AD7768_REG_GPIO_CONTROL, &val);
+	if (ret)
+		return ret;
+
+	if (val & BIT(offset))
+		ret = regmap_read(st->regmap, AD7768_REG_GPIO_WRITE, &val);
+	else
+		ret = regmap_read(st->regmap, AD7768_REG_GPIO_READ, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(offset));
+}
+
+static int ad7768_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			   int value)
+{
+	struct ad7768_gpio_state *st = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(st->parent, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = regmap_read(st->regmap, AD7768_REG_GPIO_CONTROL, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & BIT(offset)))
+		return 0;
+
+	return regmap_update_bits(st->regmap, AD7768_REG_GPIO_WRITE,
+				  BIT(offset), value << offset);
+}
+
+static int ad7768_gpio_probe(struct auxiliary_device *adev,
+			     const struct auxiliary_device_id *id)
+{
+	struct device *dev = &adev->dev;
+	const char *label = dev_get_platdata(dev);
+	struct ad7768_gpio_state *st;
+	struct gpio_chip *gc;
+	int ret;
+
+	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->parent = dev->parent;
+	st->regmap = dev_get_regmap(dev->parent, NULL);
+
+	ret = devm_mutex_init(dev, &st->lock);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(st->parent);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(st->regmap, AD7768_REG_GPIO_CONTROL,
+				 AD7768_GPIO_UGPIO_ENABLE,
+				 AD7768_GPIO_UGPIO_ENABLE);
+
+	pm_runtime_mark_last_busy(st->parent);
+	pm_runtime_put_autosuspend(st->parent);
+
+	if (ret < 0)
+		return ret;
+
+	gc = &st->gc;
+	gc->label = label;
+	gc->base = -1;
+	gc->ngpio = AD7768_NUM_GPIOS;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+	gc->can_sleep = true;
+	gc->get_direction = ad7768_gpio_get_direction;
+	gc->direction_input = ad7768_gpio_direction_input;
+	gc->direction_output = ad7768_gpio_direction_output;
+	gc->get = ad7768_gpio_get;
+	gc->set = ad7768_gpio_set;
+
+	return devm_gpiochip_add_data(dev, &st->gc, st);
+}
+
+static const struct auxiliary_device_id ad7768_gpio_ids[] = {
+	{ .name = "ad7768.gpio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, ad7768_gpio_ids);
+
+static struct auxiliary_driver ad7768_gpio_driver = {
+	.probe = ad7768_gpio_probe,
+	.id_table = ad7768_gpio_ids,
+};
+module_auxiliary_driver(ad7768_gpio_driver);
+
+MODULE_AUTHOR("Janani Sunil <janani.sunil@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7768 GPIO auxiliary driver");
+MODULE_LICENSE("GPL");

-- 
2.43.0


  parent reply	other threads:[~2026-07-09  8:51 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-09  8:50 [PATCH 0/6] iio: adc: Add AD7768/AD7768-4 ADC driver support Janani Sunil
2026-07-09  8:50 ` [PATCH 1/6] dt-bindings: iio: adc: Add AD7768 Janani Sunil
2026-07-09  8:59   ` sashiko-bot
2026-07-09 15:43   ` David Lechner
2026-07-10  0:33     ` Jonathan Cameron
2026-07-11 14:40       ` David Lechner
2026-07-10  1:39   ` Jonathan Cameron
2026-07-09  8:50 ` [PATCH 2/6] iio: backend: Add support for CRC Janani Sunil
2026-07-09  9:03   ` sashiko-bot
2026-07-10  0:36   ` Jonathan Cameron
2026-07-09  8:50 ` [PATCH 3/6] iio: adc: adi-axi-adc: " Janani Sunil
2026-07-09  9:14   ` sashiko-bot
2026-07-09 15:54   ` David Lechner
2026-07-10  0:39   ` Jonathan Cameron
2026-07-10  0:46   ` Jonathan Cameron
2026-07-09  8:50 ` [PATCH 4/6] iio: adc: Add AD7768 IIO Driver support Janani Sunil
2026-07-09  9:27   ` sashiko-bot
2026-07-10  2:10   ` Jonathan Cameron
2026-07-10  7:41   ` Uwe Kleine-König
2026-07-09  8:50 ` Janani Sunil [this message]
2026-07-09  9:38   ` [PATCH 5/6] gpio: ad7768: Add AD7768 GPIO auxiliary driver sashiko-bot
2026-07-09 11:05   ` Andy Shevchenko
2026-07-10  2:14   ` Jonathan Cameron
2026-07-10 20:06   ` Linus Walleij
2026-07-09  8:50 ` [PATCH 6/6] Documentation: iio: Add AD7768 Documentation Janani Sunil
2026-07-09  9:41   ` sashiko-bot
2026-07-10  2:16   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260709-ad7768-driver-v1-5-44e1194fd96a@analog.com \
    --to=janani.sunil@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jananisunil.dev@gmail.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@analog.com \
    --cc=nuno.sa@analog.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox