From: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Subject: [PATCH v7 7/7] ASoC: qcom: sc8280xp: add TDM hw_params support
Date: Tue, 4 Aug 2026 12:33:07 +0530 [thread overview]
Message-ID: <20260804070307.117119-8-prasad.kumpatla@oss.qualcomm.com> (raw)
In-Reply-To: <20260804070307.117119-1-prasad.kumpatla@oss.qualcomm.com>
Add TDM backend handling to the sc8280xp machine driver.
Use the common QCOM DAI-node TDM helper to parse the standard
DAI TDM slot properties from backend CPU and codec endpoints. Reuse the
parsed configuration when programming DAIs so hw_params does not need a
second DT traversal.
Derive the LPASS backend bit clock from the runtime TDM parameters and
request it through the backend child-clock path using LPAIF_MI2S_BCLK.
Program codec sysclk in hw_params so codec PLL setup happens before the
stream is triggered.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
---
sound/soc/qcom/sc8280xp.c | 59 +++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/sound/soc/qcom/sc8280xp.c b/sound/soc/qcom/sc8280xp.c
index c3ce3e05b260..597c0d887d2f 100644
--- a/sound/soc/qcom/sc8280xp.c
+++ b/sound/soc/qcom/sc8280xp.c
@@ -106,6 +106,63 @@ static inline int sc8280xp_get_bclk_freq(struct snd_pcm_hw_params *params)
snd_pcm_format_width(params_format(params)));
}
+static int sc8280xp_tdm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
+ struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+ struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai;
+ struct qcom_snd_tdm_slot_cfg cpu_cfg;
+ struct qcom_snd_tdm_slot_cfg codec_cfg;
+ unsigned int bclk_freq;
+ int ret;
+ int i;
+
+ ret = qcom_snd_get_dai_tdm_slots(rtd, &cpu_cfg, &codec_cfg);
+ if (ret)
+ return ret == -EINVAL ? 0 : ret;
+
+ if (!cpu_cfg.slots)
+ return 0;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_BP_FP);
+ if (ret)
+ return ret;
+
+ ret = qcom_snd_apply_dai_tdm_slots_cfg(rtd, &cpu_cfg, &codec_cfg);
+ if (ret)
+ return ret;
+
+ bclk_freq = snd_soc_tdm_params_to_bclk(params, cpu_cfg.slot_width, cpu_cfg.slots, 1);
+ if (!bclk_freq)
+ return -EINVAL;
+
+ if (data->priv->mi2s_bclk_enable) {
+ ret = snd_soc_dai_set_sysclk(cpu_dai, LPAIF_MI2S_BCLK, bclk_freq,
+ SND_SOC_CLOCK_IN);
+ if (ret) {
+ dev_err(rtd->dev, "%s: failed to set cpu sysclk: %d\n",
+ __func__, ret);
+ return ret;
+ }
+ }
+
+ if (data->priv->codec_sysclk_set) {
+ for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, bclk_freq,
+ SND_SOC_CLOCK_IN);
+ if (ret) {
+ dev_err(rtd->dev, "%s: failed to set codec sysclk on %s: %d\n",
+ __func__, codec_dai->name, ret);
+ return ret;
+ }
+ }
+ }
+
+ return 0;
+}
+
static int sc8280xp_snd_init(struct snd_soc_pcm_runtime *rtd)
{
struct sc8280xp_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
@@ -229,6 +286,8 @@ static int sc8280xp_snd_hw_params(struct snd_pcm_substream *substream,
return ret;
}
break;
+ case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
+ return sc8280xp_tdm_hw_params(substream, params);
default:
break;
}
--
2.34.1
next prev parent reply other threads:[~2026-08-04 7:03 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 7:03 [PATCH v7 0/7] ASoC: qcom: add AudioReach TDM backend support Prasad Kumpatla
2026-08-04 7:03 ` [PATCH v7 1/7] ASoC: qcom: qdsp6: add topology-driven Audio IF support Prasad Kumpatla
2026-08-04 7:16 ` sashiko-bot
2026-08-04 17:46 ` Cezary Rojewski
2026-08-04 17:50 ` Mark Brown
2026-08-04 17:58 ` Cezary Rojewski
2026-08-04 7:03 ` [PATCH v7 2/7] ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations Prasad Kumpatla
2026-08-04 7:03 ` [PATCH v7 3/7] dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks Prasad Kumpatla
2026-08-04 7:08 ` sashiko-bot
2026-08-04 20:16 ` Rob Herring
2026-08-05 4:40 ` Prasad Kumpatla
2026-08-05 6:10 ` Krzysztof Kozlowski
2026-08-05 6:29 ` Prasad Kumpatla
2026-08-05 6:33 ` Krzysztof Kozlowski
2026-08-05 6:36 ` Krzysztof Kozlowski
2026-08-05 6:50 ` Prasad Kumpatla
2026-08-04 7:03 ` [PATCH v7 4/7] ASoC: qcom: q6prm: add Audio IF clock IDs Prasad Kumpatla
2026-08-04 7:11 ` sashiko-bot
2026-08-04 7:03 ` [PATCH v7 5/7] dt-bindings: sound: qcom,sm8250: allow TDM slot properties Prasad Kumpatla
2026-08-04 7:17 ` sashiko-bot
2026-08-04 7:03 ` [PATCH v7 6/7] ASoC: qcom: common: add DAI-node TDM slot helpers Prasad Kumpatla
2026-08-04 7:18 ` sashiko-bot
2026-08-04 7:03 ` Prasad Kumpatla [this message]
2026-08-04 7:23 ` [PATCH v7 7/7] ASoC: qcom: sc8280xp: add TDM hw_params support sashiko-bot
2026-08-04 16:32 ` [PATCH v7 0/7] ASoC: qcom: add AudioReach TDM backend support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260804070307.117119-8-prasad.kumpatla@oss.qualcomm.com \
--to=prasad.kumpatla@oss.qualcomm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox