From: sashiko-bot@kernel.org
To: "Josua Mayer" <josua@solid-run.com>
Cc: devicetree@vger.kernel.org, wsa+renesas@sang-engineering.com,
robh@kernel.org, conor+dt@kernel.org
Subject: Re: [PATCH v9 06/11] arm64: dts: renesas: add support for solidrun rzg2lc som and hb-iiot evb
Date: Mon, 28 Sep 2026 14:56:08 +0000 [thread overview]
Message-ID: <20260928145609.96DF71F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260928-rzg2-sr-boards-v9-6-5901e0fc9e44@solid-run.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] dts: missing output-enable property for ET0_TXC pin
--
commit f7d1836ef2ca9d47ba42e92fcf7b8155deac999a
Author: Josua Mayer <josua@solid-run.com>
arm64: dts: renesas: add support for solidrun rzg2lc som and hb-iiot evb
Adds device tree support for the SolidRun RZ/G2LC SoM on the HummingBoard
IIoT carrier board. The SoM features Ethernet, eMMC, DDR, and WiFi/BT,
while the carrier provides additional I/O like USB, RS232/RS485, and DSI.
Descriptions for eMMC, microSD, and RS485 are shared with the G2L variant.
[1] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/rz-g2lc-som/
[2] https://www.solid-run.com/embedded-industrial-iot/renesas-rz-family/hummingboard-rz-series-sbcs/hummingboard-rz-g2l-iot-sbc/
> diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-sr-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-sr-som.dtsi
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzg2lc-sr-som.dtsi
[ ... ]
> +&pinctrl {
> + eth0_pins: eth0 {
> + pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
> + <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
> + <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
> + <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
[Severity: High]
Does this configuration omit the output-enable property needed to drive the
Ethernet MAC-to-PHY TX clock?
The eth0_pins node lumps all Ethernet pins into a single pinmux without
declaring output-enable. When the pinctrl driver processes this, it leaves
the PIN_CFG_OEN bit disabled, meaning the PHY will not receive a transmit
clock and Ethernet transmission could fail.
Would it be better to isolate ET0_TXC into a subnode with output-enable
declared to ensure the clock is driven out by the SoC?
> + <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
> + <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
[ ... ]
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260928-rzg2-sr-boards-v9-0-5901e0fc9e44@solid-run.com?part=6
next prev parent reply other threads:[~2026-09-28 14:56 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-28 14:39 [PATCH v9 00/11] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Josua Mayer
2026-09-28 14:39 ` [PATCH v9 01/11] dt-bindings: soc: " Josua Mayer
2026-09-28 14:39 ` [PATCH v9 02/11] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow input-/output-disable Josua Mayer
2026-09-28 14:39 ` [PATCH v9 03/11] dt-bindings: usb: cypress,hx3: make peer-hub property optional Josua Mayer
2026-09-28 14:39 ` [PATCH v9 04/11] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb Josua Mayer
2026-09-28 16:14 ` Geert Uytterhoeven
2026-09-28 14:39 ` [PATCH v9 05/11] arm64: dts: renesas: add support for solidrun rzv2l " Josua Mayer
2026-09-28 14:39 ` [PATCH v9 06/11] arm64: dts: renesas: add support for solidrun rzg2lc " Josua Mayer
2026-09-28 14:56 ` sashiko-bot [this message]
2026-09-28 16:03 ` Josua Mayer
2026-09-28 14:39 ` [PATCH v9 07/11] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay Josua Mayer
2026-09-28 14:49 ` sashiko-bot
2026-09-28 14:39 ` [PATCH v9 08/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2l som Josua Mayer
2026-09-28 14:51 ` sashiko-bot
2026-09-28 15:58 ` Josua Mayer
2026-09-28 16:10 ` Geert Uytterhoeven
2026-09-28 16:21 ` Josua Mayer
2026-09-28 17:00 ` Geert Uytterhoeven
2026-09-28 14:39 ` [PATCH v9 09/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzv2l som Josua Mayer
2026-09-28 14:39 ` [PATCH v9 10/11] arm64: dts: renesas: add support for solidrun hb-ripple with rzg2lc som Josua Mayer
2026-09-28 14:39 ` [PATCH v9 11/11] arm64: dts: renesas: add support for solidrun rzg2ul som on hb-ripple Josua Mayer
2026-09-28 14:51 ` sashiko-bot
2026-09-28 16:32 ` Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260928145609.96DF71F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=josua@solid-run.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox