[PATCH v4 0/4] arm64: dts: arduino-imola: add support for sound

[PATCH v4 0/4] arm64: dts: arduino-imola: add support for sound

[Srinivas Kandagatla]

This patchset adds support for audio on Arduino-Imola platform which is
based on Agatti SoC. Some of Alexey's patches are reworked and sent
here as per previous review comments, mainly on the dt-bindings part.

Base SoC-level dtsi bits are picked up from
https://git.codelinaro.org/alexey.klimov/linux_next_tracking/-/commits/rb1_audio_wip_v3?ref_type=HEADS

Along with these changes, add sound nodes for Imola and a defconfig
change.

thanks,
Srini

Changes since v3:
    - rebased on next-20260929.
    - dropped "clk: qcom: fix SM6115 lpasscc register offset" — now
      upstream (689364ac19e4).
    - dt-bindings/mfd: rework the audio-codec pattern to use oneOf
      with the pm4125-codec and pm8916-wcd-analog-codec $refs,
    - dt-bindings/mfd: fix "pm4124" typo in subject; the compatible
      is qcom,pm4125-codec.
    - agatti.dtsi: fix lpasscc node unit-address to match reg
      (@a7ec000 -> @a7e0000) after the driver register-offset fix.
    - arduino-imola sound dts: mention "Ear Out" in commit log, per
      Alexey.
    - arduino-imola sound dts: carry Reviewed-by from Alexey.

Changes since v2:
    - dt-bindings/mfd: switch to properties.compatible.contains.enum
      with required: compatible, per Rob.
    - agatti.dtsi: collapse each <&q6afecc ...> clock cell onto a
      single line, per Dmitry.
    - keep qcom,sm6115-lpassaudiocc / qcom,sm6115-lpasscc compatibles;
      Konrad Acked staying with the established practice.
    - defconfig: carry Reviewed-by from Dmitry.
    - rebase on next-20260917.

Changes since v1:
    - updated various register ranges as per documentation.
    - added a fix for sm6115 lpasscc driver.
    - updated commit log
    - fixed various style issues in dt nodes.

Alexey Klimov (1):
  arm64: dts: qcom: agatti: add LPASS devices

Srinivas Kandagatla (3):
  dt-bindings: mfd: qcom,spmi-pmic: add compatibles for pm4125-codec
  arm64: dts: arduino-imola: add support for sound
  arm64: defconfig: Enable pm4125 audio codec driver

 .../bindings/mfd/qcom,spmi-pmic.yaml          |   4 +-
 arch/arm64/boot/dts/qcom/agatti.dtsi          | 157 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm4125.dtsi          |   7 +
 .../boot/dts/qcom/qrb2210-arduino-imola.dts   | 134 +++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 5 files changed, 302 insertions(+), 1 deletion(-)


base-commit: 6474fa070f2b8013b4b87350b775b8c3be6e8aac
-- 
2.53.0

[PATCH v4 1/4] dt-bindings: mfd: qcom,spmi-pmic: add compatibles for pm4125-codec

[Srinivas Kandagatla]

Qualcomm Agatti SoC has PM4125 PMIC, which includes audio codec.
Audio codec has TX and RX soundwire slave devices to connect to on-chip
soundwire master.

Add missing qcom,pm4125-codec compatible to pattern of audio-codec node
properties in mfd qcom,spmi-pmic schema to complete the audio codec
support.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index f6534e9e9912..7a889d888383 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -148,7 +148,9 @@ patternProperties:
 
   "^audio-codec@[0-9a-f]+$":
     type: object
-    $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
+    oneOf:
+      - $ref: /schemas/sound/qcom,pm4125-codec.yaml#
+      - $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
 
   "^battery@[0-9a-f]+$":
     type: object
-- 
2.53.0

Re: [PATCH v4 1/4] dt-bindings: mfd: qcom,spmi-pmic: add compatibles for pm4125-codec

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] mfd: commit message description is not capitalized
--

commit 0fe10ec995802f796e4bfb33e8867d9a4a028323
Author: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

dt-bindings: mfd: qcom,spmi-pmic: add compatibles for pm4125-codec

This commit adds the missing qcom,pm4125-codec compatible to the audio-codec
node properties in the qcom,spmi-pmic schema to complete support for the
PM4125 PMIC.

> dt-bindings: mfd: qcom,spmi-pmic: add compatibles for pm4125-codec

[Severity: Low]
This isn't a bug, but does this violate the MFD subsystem commit message
formatting guidelines? The description after the prefix should be
capitalized, but "add" uses a lowercase "a".

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260930124607.1109167-1-srinivas.kandagatla@oss.qualcomm.com?part=1

Re: [PATCH v4 1/4] dt-bindings: mfd: qcom,spmi-pmic: add compatibles for pm4125-codec

[Krzysztof Kozlowski]

On Wed, Sep 30, 2026 at 01:46:03PM +0100, Srinivas Kandagatla wrote:
> Qualcomm Agatti SoC has PM4125 PMIC, which includes audio codec.
> Audio codec has TX and RX soundwire slave devices to connect to on-chip
> soundwire master.
> 
> Add missing qcom,pm4125-codec compatible to pattern of audio-codec node
> properties in mfd qcom,spmi-pmic schema to complete the audio codec
> support.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH v4 2/4] arm64: dts: qcom: agatti: add LPASS devices

[Srinivas Kandagatla]

From: Alexey Klimov <alexey.klimov@linaro.org>

The rxmacro, txmacro, vamacro, soundwire nodes, lpass clock
controllers are required to support audio playback and
audio capture on sm6115 and its derivatives.

Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/agatti.dtsi | 157 +++++++++++++++++++++++++++
 1 file changed, 157 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi
index d9f4cbfd2861..c208649c92ab 100644
--- a/arch/arm64/boot/dts/qcom/agatti.dtsi
+++ b/arch/arm64/boot/dts/qcom/agatti.dtsi
@@ -778,6 +778,42 @@ data-pins {
 					drive-strength = <8>;
 				};
 			};
+
+			lpass_tx_swr_active: lpass-tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <10>;
+					slew-rate = <3>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <10>;
+					slew-rate = <3>;
+					bias-bus-hold;
+				};
+			};
+
+			lpass_rx_swr_active: lpass-rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <10>;
+					slew-rate = <3>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <10>;
+					slew-rate = <3>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -2246,6 +2282,127 @@ glink-edge {
 			};
 		};
 
+		rxmacro: codec@a600000 {
+			compatible = "qcom,sm6115-lpass-rx-macro";
+			reg = <0x0 0xa600000 0x0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_RX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_RX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk",
+				      "npl",
+				      "dcodec",
+				      "fsgen";
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@a610000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x0a610000 0x0 0x10000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+
+			resets = <&lpass_audiocc 0>;
+			reset-names = "swr_audio_cgcr";
+
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		txmacro: codec@a620000 {
+			compatible = "qcom,sm6115-lpass-tx-macro";
+			reg = <0x0 0x0a620000 0x0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk",
+				      "npl",
+				      "dcodec",
+				      "fsgen";
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_audiocc: clock-controller@a6a9000 {
+			compatible = "qcom,sm6115-lpassaudiocc";
+			reg = <0x0 0x0a6a9000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		vamacro: codec@a730000 {
+			compatible = "qcom,sm6115-lpass-va-macro";
+			reg = <0x0 0x0a730000 0x0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "dcodec",
+				      "npl";
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@a740000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x0a740000 0x0 0x10000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&txmacro>;
+			clock-names = "iface";
+
+			resets = <&lpasscc 0>;
+			reset-names = "swr_audio_cgcr";
+
+			label = "VA_TX";
+			qcom,din-ports = <3>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x00 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		lpasscc: clock-controller@a7e0000 {
+			compatible = "qcom,sm6115-lpasscc";
+			reg = <0x0 0x0a7e0000 0x0 0x12000>;
+			#reset-cells = <1>;
+		};
+
 		remoteproc_adsp: remoteproc@ab00000 {
 			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
 			reg = <0x0 0x0ab00000 0x0 0x100>;
-- 
2.53.0

Re: [PATCH v4 2/4] arm64: dts: qcom: agatti: add LPASS devices

[sashiko-bot]

> From: Alexey Klimov <alexey.klimov@linaro.org>
> 
> The rxmacro, txmacro, vamacro, soundwire nodes, lpass clock
> controllers are required to support audio playback and
> audio capture on sm6115 and its derivatives.
> 
> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260930124607.1109167-1-srinivas.kandagatla@oss.qualcomm.com?part=2

[PATCH v4 3/4] arm64: dts: arduino-imola: add support for sound

[Srinivas Kandagatla]

Add support for sound on Arduino UNO Q board, which includes
- Headset playback and record.
- Lineout
- Ear Out

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm4125.dtsi          |   7 +
 .../boot/dts/qcom/qrb2210-arduino-imola.dts   | 134 ++++++++++++++++++
 2 files changed, 141 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm4125.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi
index 3dc8d667d091..85da78aec578 100644
--- a/arch/arm64/boot/dts/qcom/pm4125.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi
@@ -81,6 +81,13 @@ pm4125_gpios: gpio@c000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmic4125_codec: audio-codec@f000 {
+			compatible = "qcom,pm4125-codec";
+			reg = <0xf000>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
 	};
 
 	pmic@1 {
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
index c472e13fceca..e99d2a56dc28 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
@@ -110,6 +110,102 @@ multi-led {
 		leds = <&ledr>, <&ledg>, <&ledb>;
 	};
 
+	sound {
+		compatible = "qcom,qrb2210-sndcard";
+		model = "Arduino-Imola-HPH-LOUT";
+		audio-routing =	"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2";
+
+		ear-playback-dai-link {
+			link-name = "Ear Out Playback";
+
+			codec {
+				sound-dai = <&pmic4125_codec 0>, <&swr1 0>, <&rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+		};
+
+		hph-capture-dai-link {
+			link-name = "Headphones Capture";
+
+			codec {
+				sound-dai = <&pmic4125_codec 1>, <&swr0 0>, <&txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+		};
+
+		hph-playback-dai-link {
+			link-name = "Headphones Playback";
+
+			codec {
+				sound-dai = <&pmic4125_codec 0>, <&swr1 0>, <&rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+		};
+
+		lo-playback-dai-link {
+			link-name = "Line Out Playback";
+
+			codec {
+				sound-dai = <&pmic4125_codec 0>, <&swr1 0>, <&rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+		};
+
+		mm1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		mm2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		mm3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+	};
+
 	vreg_anx_30: regulator-anx-30 {
 		compatible = "regulator-fixed";
 		regulator-name = "anx30";
@@ -421,6 +517,44 @@ mcu@0 {
 	};
 };
 
+&pmic4125_codec {
+	vdd-io-supply = <&pm4125_l15>;
+	vdd-cp-supply = <&pm4125_s4>;
+	vdd-pa-vpos-supply = <&pm4125_s4>;
+	vdd-mic-bias-supply = <&pm4125_l22>;
+
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <1800000>;
+
+	qcom,rx-device = <&pm4125_rx>;
+	qcom,tx-device = <&pm4125_tx>;
+
+	status = "okay";
+};
+
+&swr0 {
+	pinctrl-0 = <&lpass_tx_swr_active>;
+	pinctrl-names = "default";
+
+	pm4125_tx: codec@0,3 {
+		compatible = "sdw20217010c00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&swr1 {
+	pinctrl-0 = <&lpass_rx_swr_active>;
+	pinctrl-names = "default";
+
+	pm4125_rx: codec@0,4 {
+		compatible = "sdw20217010c00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
 &tlmm {
 	jmisc_gpio18: jmisc-gpio18-state {
 		pins = "gpio18";
-- 
2.53.0

Re: [PATCH v4 3/4] arm64: dts: arduino-imola: add support for sound

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] ASoC: qrb2210-sndcard: duplicate BE DAI links for RX_CODEC_DMA_RX_0
--

commit d222aeffc646b4d2645c81200f3c926432d5d57b
Author: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

arm64: dts: arduino-imola: add support for sound

This commit adds sound support for the Arduino UNO Q board, enabling headset
playback and record, lineout, and ear out functionalities. It updates the
pm4125 device tree include and introduces audio routing and DAI links in the
arduino-imola device tree.

> diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
> index c472e13fceca4..e99d2a56dc287 100644
> --- a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
[ ... ]
> +		ear-playback-dai-link {
> +			link-name = "Ear Out Playback";
> +
> +			codec {
> +				sound-dai = <&pmic4125_codec 0>, <&swr1 0>, <&rxmacro 0>;
> +			};
> +
> +			cpu {
> +				sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
> +			};
[ ... ]
> +		hph-playback-dai-link {
> +			link-name = "Headphones Playback";
> +
> +			codec {
> +				sound-dai = <&pmic4125_codec 0>, <&swr1 0>, <&rxmacro 0>;
> +			};
> +
> +			cpu {
> +				sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
> +			};
[ ... ]
> +		lo-playback-dai-link {
> +			link-name = "Line Out Playback";
> +
> +			codec {
> +				sound-dai = <&pmic4125_codec 0>, <&swr1 0>, <&rxmacro 0>;
> +			};
> +
> +			cpu {
> +				sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
> +			};

[Severity: Low]
Are we creating redundant backend DAI links for the exact same physical CPU
DAI (RX_CODEC_DMA_RX_0) here?

In ASoC DPCM, dpcm_get_be() returns only the first RTD it matches for a given
widget. Because of this, it appears DPCM will strictly only use the 
ear-playback-dai-link, while the hph-playback-dai-link and 
lo-playback-dai-link will be ignored and their hardware operations will 
never execute concurrently.

Could these be consolidated into a single backend DAI link, relying on the
pm4125 codec's internal DAPM graph to handle multiplexing the single backend
stream to the Ear, Headphone, and Lineout pins?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260930124607.1109167-1-srinivas.kandagatla@oss.qualcomm.com?part=3

[PATCH v4 4/4] arm64: defconfig: Enable pm4125 audio codec driver

[Srinivas Kandagatla]

Enable pm4125 audio codec driver that is required to enable audio
support on Arduino UnoQ board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index fce418fe6ff6..6c41348d1abc 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1172,6 +1172,7 @@ CONFIG_SND_SOC_GTM601=m
 CONFIG_SND_SOC_MAX98090=m
 CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
 CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
+CONFIG_SND_SOC_PM4125_SDW=m
 CONFIG_SND_SOC_RK3308=m
 CONFIG_SND_SOC_RK817=m
 CONFIG_SND_SOC_RT5640=m
-- 
2.53.0

Re: [PATCH v4 4/4] arm64: defconfig: Enable pm4125 audio codec driver

[sashiko-bot]

> Enable pm4125 audio codec driver that is required to enable audio
> support on Arduino UnoQ board.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260930124607.1109167-1-srinivas.kandagatla@oss.qualcomm.com?part=4