[PATCH 6/6] arm64: dts: qcom: sm8250-hdk: Add PM8150b LEDs

[ShiTou Hong <redstone.dcity@gmail.com>]

There are 2 LEDs controlled by PM8150b on sm8250-hdk
which are not added in the dts file.
The LED1 is for heartbeat indicator,
the LED2 is for wifi activity.

Enable the LED controller of PM8150b,
add the LED nodes with proper triggers into it.

Signed-off-by: ShiTou Hong <dc_redstone@outlook.com>
---
 arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index 57c282bdb..e321fe9c1 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -157,6 +158,24 @@ vreg_pmu_pcie_1p8: ldo9 {
 	};
 };
 
+&pm8150b_lpg {
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		function = LED_FUNCTION_HEARTBEAT;
+		linux,default-trigger = "heartbeat";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@2 {
+		reg = <2>;
+		function = LED_FUNCTION_WLAN;
+		linux,default-trigger = "phy0tx";
+		color = <LED_COLOR_ID_RED>;
+	};
+};
+
 &apps_rsc {
 	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
-- 
2.47.3