From: Jisheng Zhang <jszhang@kernel.org>
To: Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Linus Walleij <linusw@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: [PATCH v2 00/13] arm64: add Synaptics SL2610 SoCs and RDK boards
Date: Sun, 15 Nov 2026 18:23:39 +0800 [thread overview]
Message-ID: <20261115102401.3520-1-jszhang@kernel.org> (raw)
Add initial support for the Synaptics SL261X SoCs and corresponding
RDK boards.
The SL261X SoCs include five pin-to-pin compatible SoCs: SL2611, SL2613,
SL2615, SL2617, and SL2619.
Only reset, pinctrl, clk/pll, uart, gpio, i2c, spi, i3c are included in
this series. The support for Ethernet, USB, SDHCI, CAN, DMAC, XSPI will
be submitted after this series is merged.
since v1:
- rebase on latest rcN
- drop some patches which have been merged
- let the "gbl" node export pinctrl/reset/clk devices with
MFD_CELL_NAME()
- use <linux/platform_device.h> instead of <linux/mod_devicetable.h>
- adopt some coding suggestions from Uwe
- Use 0 and 1 to select normal and strong pull-up on 10-bit pads
- collect Acked-by tag
Jisheng Zhang (13):
arm64: kconfig: let ARCH_BERLIN cover Synaptics arm64 SoCs
pinctrl: berlin: use u16 instead of u8 for the offset
pinctrl: berlin: enable module build support
pinctrl: berlin: add optional pinconf support
dt-bindings: soc: synaptics: add SL2610 system controllers
soc: synaptics: add SL2610 system controller support
reset: add Synaptics SL2610 reset controller support
pinctrl: berlin: add Synaptics SL2610 pin controller support
clk: berlin: add Synaptics clock controller helpers
clk: berlin: add Synaptics SL2610 clocks and PLLs
dt-bindings: arm: berlin: add Synaptics SL2610 SoCs and RDK boards
arm64: dts: synaptics: add SL2610 family SoCs
arm64: dts: synaptics: add SL2610 family RDK boards
.../bindings/arm/marvell,berlin.yaml | 20 +
.../soc/synaptics/syna,sl2610-soc-syscon.yaml | 178 ++++
MAINTAINERS | 8 +
arch/arm64/Kconfig.platforms | 4 +-
arch/arm64/boot/dts/synaptics/Makefile | 5 +
arch/arm64/boot/dts/synaptics/sl2611-rdk.dts | 16 +
arch/arm64/boot/dts/synaptics/sl2611.dtsi | 457 +++++++++++
arch/arm64/boot/dts/synaptics/sl2613-rdk.dts | 16 +
arch/arm64/boot/dts/synaptics/sl2613.dtsi | 12 +
arch/arm64/boot/dts/synaptics/sl2615-rdk.dts | 16 +
arch/arm64/boot/dts/synaptics/sl2615.dtsi | 46 ++
arch/arm64/boot/dts/synaptics/sl2617-rdk.dts | 16 +
arch/arm64/boot/dts/synaptics/sl2617.dtsi | 46 ++
arch/arm64/boot/dts/synaptics/sl2619-rdk.dts | 16 +
arch/arm64/boot/dts/synaptics/sl2619.dtsi | 44 +
.../boot/dts/synaptics/sl261x-rdk-common.dtsi | 135 ++++
drivers/clk/Kconfig | 1 +
drivers/clk/berlin/Kconfig | 34 +
drivers/clk/berlin/Makefile | 4 +
drivers/clk/berlin/clk-sl2610.c | 360 +++++++++
drivers/clk/berlin/sl-clk.c | 279 +++++++
drivers/clk/berlin/sl-clk.h | 31 +
drivers/clk/berlin/sl-sysmgr-clk.c | 241 ++++++
drivers/clk/berlin/sl-sysmgr-clk.h | 44 +
drivers/clk/berlin/sl2610-pll.c | 145 ++++
drivers/clk/berlin/sl2610-pll.h | 14 +
drivers/pinctrl/berlin/Kconfig | 16 +
drivers/pinctrl/berlin/Makefile | 1 +
drivers/pinctrl/berlin/berlin.c | 259 +++++-
drivers/pinctrl/berlin/berlin.h | 17 +-
drivers/pinctrl/berlin/pinctrl-sl2610.c | 759 ++++++++++++++++++
drivers/reset/Kconfig | 13 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sl2610.c | 224 ++++++
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/synaptics/Kconfig | 14 +
drivers/soc/synaptics/Makefile | 2 +
drivers/soc/synaptics/sl2610-syscon.c | 84 ++
include/dt-bindings/clock/syna,sl2610.h | 131 +++
include/dt-bindings/reset/syna,sl2610-reset.h | 80 ++
41 files changed, 3771 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/synaptics/syna,sl2610-soc-syscon.yaml
create mode 100644 arch/arm64/boot/dts/synaptics/sl2611-rdk.dts
create mode 100644 arch/arm64/boot/dts/synaptics/sl2611.dtsi
create mode 100644 arch/arm64/boot/dts/synaptics/sl2613-rdk.dts
create mode 100644 arch/arm64/boot/dts/synaptics/sl2613.dtsi
create mode 100644 arch/arm64/boot/dts/synaptics/sl2615-rdk.dts
create mode 100644 arch/arm64/boot/dts/synaptics/sl2615.dtsi
create mode 100644 arch/arm64/boot/dts/synaptics/sl2617-rdk.dts
create mode 100644 arch/arm64/boot/dts/synaptics/sl2617.dtsi
create mode 100644 arch/arm64/boot/dts/synaptics/sl2619-rdk.dts
create mode 100644 arch/arm64/boot/dts/synaptics/sl2619.dtsi
create mode 100644 arch/arm64/boot/dts/synaptics/sl261x-rdk-common.dtsi
create mode 100644 drivers/clk/berlin/Kconfig
create mode 100644 drivers/clk/berlin/clk-sl2610.c
create mode 100644 drivers/clk/berlin/sl-clk.c
create mode 100644 drivers/clk/berlin/sl-clk.h
create mode 100644 drivers/clk/berlin/sl-sysmgr-clk.c
create mode 100644 drivers/clk/berlin/sl-sysmgr-clk.h
create mode 100644 drivers/clk/berlin/sl2610-pll.c
create mode 100644 drivers/clk/berlin/sl2610-pll.h
create mode 100644 drivers/pinctrl/berlin/pinctrl-sl2610.c
create mode 100644 drivers/reset/reset-sl2610.c
create mode 100644 drivers/soc/synaptics/Kconfig
create mode 100644 drivers/soc/synaptics/Makefile
create mode 100644 drivers/soc/synaptics/sl2610-syscon.c
create mode 100644 include/dt-bindings/clock/syna,sl2610.h
create mode 100644 include/dt-bindings/reset/syna,sl2610-reset.h
--
2.55.0
next reply other threads:[~2026-11-15 10:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 10:23 Jisheng Zhang [this message]
2026-11-15 10:23 ` [PATCH v2 01/13] arm64: kconfig: let ARCH_BERLIN cover Synaptics arm64 SoCs Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 02/13] pinctrl: berlin: use u16 instead of u8 for the offset Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 03/13] pinctrl: berlin: enable module build support Jisheng Zhang
2026-11-15 10:58 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 04/13] pinctrl: berlin: add optional pinconf support Jisheng Zhang
2026-11-15 11:01 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 05/13] dt-bindings: soc: synaptics: add SL2610 system controllers Jisheng Zhang
2026-11-15 10:58 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 06/13] soc: synaptics: add SL2610 system controller support Jisheng Zhang
2026-11-15 10:56 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 07/13] reset: add Synaptics SL2610 reset " Jisheng Zhang
2026-11-15 11:12 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 08/13] pinctrl: berlin: add Synaptics SL2610 pin " Jisheng Zhang
2026-11-15 10:57 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 09/13] clk: berlin: add Synaptics clock controller helpers Jisheng Zhang
2026-11-15 11:05 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 10/13] clk: berlin: add Synaptics SL2610 clocks and PLLs Jisheng Zhang
2026-11-15 11:04 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 11/13] dt-bindings: arm: berlin: add Synaptics SL2610 SoCs and RDK boards Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 12/13] arm64: dts: synaptics: add SL2610 family SoCs Jisheng Zhang
2026-11-15 11:13 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 13/13] arm64: dts: synaptics: add SL2610 family RDK boards Jisheng Zhang
2026-11-15 11:05 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261115102401.3520-1-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=bmasney+clk@redhat.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox