From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Svyatoslav Ryhel <clamor95@gmail.com>,
Mikko Perttunen <mperttunen@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 12/18] ARM: tegra: tegratab: Add common sensor nodes
Date: Sun, 22 Nov 2026 22:14:01 +0200 [thread overview]
Message-ID: <20261122201407.23742-13-clamor95@gmail.com> (raw)
In-Reply-To: <20261122201407.23742-1-clamor95@gmail.com>
The Tegra Note 7 uses an InvenSense IMU with different per-device
calibration matrices, a Capella CM3217 ambient light sensor, and a Lite-On
LTR-659 proximity sensor on the P1988 board.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../tegra114-nvidia-tegratab-common.dtsi | 37 +++++++++++++++++++
.../nvidia/tegra114-nvidia-tegratab-p1640.dts | 8 ++++
.../nvidia/tegra114-nvidia-tegratab-p1988.dts | 21 +++++++++++
3 files changed, 66 insertions(+)
diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
index 07091ffa6df19..c839e6159de5b 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
@@ -989,6 +989,13 @@ gen1_i2c: i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
+ light-sensor@10 {
+ compatible = "capella,cm3217";
+ reg = <0x10>;
+
+ vdd-supply = <&vdd_2v85_sen>;
+ };
+
rt5639: audio-codec@1c {
compatible = "realtek,rt5639";
reg = <0x1c>;
@@ -1022,6 +1029,36 @@ fuel-gauge@36 {
wakeup-source;
};
+ motion-tracker@69 {
+ compatible = "invensense,mpu6050";
+ reg = <0x69>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+ vdd-supply = <&vdd_2v85_sen>;
+ vddio-supply = <&vlogic_gyro>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0d>;
+
+ /* no DRDY (polling) */
+
+ vdd-supply = <&vdd_2v85_sen>;
+ vid-supply = <&vdd_1v8_vio>;
+
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
+ };
+ };
+ };
+
bq24193: charger@6b {
compatible = "ti,bq24193";
reg = <0x6b>;
diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1640.dts b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1640.dts
index 8177e4f7db489..866158f055913 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1640.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1640.dts
@@ -7,6 +7,14 @@ / {
model = "Nvidia Tegra Note 7 (P1640)";
compatible = "nvidia,tegratab", "nvidia,tegra114";
+ i2c@7000c000 {
+ motion-tracker@69 {
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+ };
+
pwrseq-wifi {
clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_3>;
clock-names = "ext_clock";
diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts
index 9447203eeda36..7ccda46c42af2 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-p1988.dts
@@ -7,6 +7,27 @@ / {
model = "Nvidia Tegra Note 7 (P1988)";
compatible = "nvidia,tegratab", "nvidia,tegra114";
+ i2c@7000c000 {
+ proximity@23 {
+ compatible = "liteon,ltr659";
+ reg = <0x23>;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_FALLING>;
+
+ proximity-near-level = <50>;
+
+ vdd-supply = <&vdd_2v85_sen>;
+ vddio-supply = <&vdd_1v8_vio>;
+ };
+
+ motion-tracker@69 {
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "1";
+ };
+ };
+
i2c@7000d000 {
pmic@58 {
pmic {
--
2.53.0
next prev parent reply other threads:[~2026-11-22 20:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 20:13 [PATCH v1 00/18] [WIP] ARM: tegra: Update Tegra Note 7 configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 01/18] dt-bindings: ARM: tegra: Document Tegra Note 7 variants Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 02/18] ARM: tegra: Diverge Tegra Note 7 device tree to support its common versions Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 03/18] ARM: tegra: tegratab: Upgrade powerlines configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 04/18] ARM: tegra: tegratab: Add pinmux node Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 05/18] ARM: tegra: tegratab: Bind VDE device Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 06/18] ARM: tegra: tegratab: Configure USB and power supply Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 07/18] ARM: tegra: tegratab: Configure MMC devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 08/18] ARM: tegra: tegratab: Configure wireless devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 09/18] ARM: tegra: tegratab: Add thermal configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 10/18] ARM: tegra: tegratab: Configure HDMI Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 11/18] ARM: tegra: tegratab: Add audio codec and sound card configuration Svyatoslav Ryhel
2026-11-22 20:14 ` Svyatoslav Ryhel [this message]
2026-11-22 20:14 ` [PATCH v1 13/18] ARM: tegra: tegratab: Add MC and EMC timing nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 14/18] ARM: tegra: tegratab: Add CPU DFLL clock node Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 15/18] ARM: tegra: tegratab: Update GPIO keys and switches Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 16/18] ARM: tegra: tegratab: Update aliases, chosen and memory nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 17/18] ARM: tegra: tegratab: Add video input configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 18/18] ARM: tegra: tegratab: Add panel rotation Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122201407.23742-13-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mperttunen@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox