Devicetree
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Thierry Reding <thierry.reding@kernel.org>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Mikko Perttunen <mperttunen@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 17/18] ARM: tegra: tegratab: Add video input configuration
Date: Sun, 22 Nov 2026 22:14:06 +0200	[thread overview]
Message-ID: <20261122201407.23742-18-clamor95@gmail.com> (raw)
In-Reply-To: <20261122201407.23742-1-clamor95@gmail.com>

Add camera nodes, VI and CSI graphs, and interlink them.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../tegra114-nvidia-tegratab-common.dtsi      | 163 ++++++++++++++++++
 1 file changed, 163 insertions(+)

diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
index 1e9df07dadc98..99f0d1c345e63 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "tegra114.dtsi"
@@ -61,6 +63,91 @@ trustzone@bfe00000 {
 	};
 
 	host1x@50000000 {
+		vi@54080000 {
+			status = "okay";
+
+			csi@800 {
+				status = "okay";
+
+				avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+				/* CSI-A */
+				channel@0 {
+					reg = <0>;
+
+					nvidia,mipi-calibrate = <&mipi 0x003>; /* CSIA & CSIB pads */
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csia_input: endpoint {
+							data-lanes = <1 2>;
+							remote-endpoint = <&rear_camera_output>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						csia_output: endpoint {
+							remote-endpoint = <&vi_ppa_input>;
+						};
+					};
+				};
+
+				/* CSI-B */
+				channel@1 {
+					reg = <1>;
+
+					nvidia,mipi-calibrate = <&mipi 0x00c>; /* CSIC & CSID pads */
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						csib_input: endpoint {
+							data-lanes = <3>;
+							remote-endpoint = <&front_camera_output>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						csib_output: endpoint {
+							remote-endpoint = <&vi_ppb_input>;
+						};
+					};
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					vi_ppa_input: endpoint {
+						remote-endpoint = <&csia_output>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					vi_ppb_input: endpoint {
+						remote-endpoint = <&csib_output>;
+					};
+				};
+			};
+		};
+
 		hdmi@54280000 {
 			status = "okay";
 
@@ -1270,6 +1357,82 @@ power-sensor@44 {
 		};
 	};
 
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		ad5823: coil@c {
+			compatible = "adi,ad5823";
+			reg = <0x0c>;
+
+			VANA-supply = <&avdd_2v8_front>;
+			enable-gpios = <&gpio TEGRA_GPIO(BB, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		rear-camera@10 {
+			compatible = "ovti,ov5693";
+			reg = <0x10>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
+
+			clocks = <&tegra_car TEGRA114_CLK_CSUS>;
+			clock-names = "xvclk";
+
+			avdd-supply = <&avdd_2v7_rear>;
+			dvdd-supply = <&vdd_1v8_vio>; // vdd_1v2_cam
+			dovdd-supply = <&vddio_1v8_cam>;
+
+			orientation = <MEDIA_ORIENTATION_BACK>;
+			rotation = <90>;
+
+//			lens-focus = <&ad5823>;
+
+			assigned-clocks = <&tegra_car TEGRA114_CLK_VI_SENSOR>,
+					  <&tegra_car TEGRA114_CLK_CSUS>;
+			assigned-clock-rates = <24000000>;
+			assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>,
+						 <&tegra_car TEGRA114_CLK_VI_SENSOR>;
+
+			port {
+				rear_camera_output: endpoint {
+					data-lanes = <1 2>;
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					link-frequencies = /bits/ 64 <400000000>;
+					remote-endpoint = <&csia_input>;
+				};
+			};
+		};
+
+		front-camera@21 {
+			compatible = "ovti,ov7695";
+			reg = <0x21>;
+
+			clocks = <&tegra_car TEGRA114_CLK_CSUS>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
+
+			vdddo-supply = <&vddio_1v8_cam>;
+			vdda-supply = <&avdd_2v8_front>;
+			vddd-supply = <&vdd_1v8_vio>;
+
+			orientation = <MEDIA_ORIENTATION_FRONT>;
+
+			assigned-clocks = <&tegra_car TEGRA114_CLK_VI_SENSOR>,
+					  <&tegra_car TEGRA114_CLK_CSUS>;
+			assigned-clock-rates = <24000000>;
+			assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>,
+						 <&tegra_car TEGRA114_CLK_VI_SENSOR>;
+
+			port {
+				front_camera_output: endpoint {
+					data-lanes = <3>;
+					link-frequencies = /bits/ 64 <96000000>;
+					remote-endpoint = <&csib_input>;
+				};
+			};
+		};
+	};
+
 	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
-- 
2.53.0


  parent reply	other threads:[~2026-11-22 20:15 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-22 20:13 [PATCH v1 00/18] [WIP] ARM: tegra: Update Tegra Note 7 configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 01/18] dt-bindings: ARM: tegra: Document Tegra Note 7 variants Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 02/18] ARM: tegra: Diverge Tegra Note 7 device tree to support its common versions Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 03/18] ARM: tegra: tegratab: Upgrade powerlines configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 04/18] ARM: tegra: tegratab: Add pinmux node Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 05/18] ARM: tegra: tegratab: Bind VDE device Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 06/18] ARM: tegra: tegratab: Configure USB and power supply Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 07/18] ARM: tegra: tegratab: Configure MMC devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 08/18] ARM: tegra: tegratab: Configure wireless devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 09/18] ARM: tegra: tegratab: Add thermal configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 10/18] ARM: tegra: tegratab: Configure HDMI Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 11/18] ARM: tegra: tegratab: Add audio codec and sound card configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 12/18] ARM: tegra: tegratab: Add common sensor nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 13/18] ARM: tegra: tegratab: Add MC and EMC timing nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 14/18] ARM: tegra: tegratab: Add CPU DFLL clock node Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 15/18] ARM: tegra: tegratab: Update GPIO keys and switches Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 16/18] ARM: tegra: tegratab: Update aliases, chosen and memory nodes Svyatoslav Ryhel
2026-11-22 20:14 ` Svyatoslav Ryhel [this message]
2026-11-22 20:14 ` [PATCH v1 18/18] ARM: tegra: tegratab: Add panel rotation Svyatoslav Ryhel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261122201407.23742-18-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mperttunen@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox