From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Svyatoslav Ryhel <clamor95@gmail.com>,
Mikko Perttunen <mperttunen@nvidia.com>
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 07/18] ARM: tegra: tegratab: Configure MMC devices
Date: Sun, 22 Nov 2026 22:13:56 +0200 [thread overview]
Message-ID: <20261122201407.23742-8-clamor95@gmail.com> (raw)
In-Reply-To: <20261122201407.23742-1-clamor95@gmail.com>
The tegratab board uses three MMC controllers of four that Tegra SoC has
(the second one is unused).
The first is used for Wi-Fi SDIO, the third for microSD card support, and
the fourth for the internal eMMC device. Configure all controllers
accordingly.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../tegra114-nvidia-tegratab-common.dtsi | 56 ++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
index 2ccee3b70aac9..b7a14e24df79b 100644
--- a/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114-nvidia-tegratab-common.dtsi
@@ -13,6 +13,10 @@ chosen {
};
aliases {
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc3; /* uSD slot */
+ mmc2 = &sdmmc1; /* WiFi */
+
serial0 = &uartd;
};
@@ -1254,11 +1258,61 @@ i2c-thermtrip {
};
};
+ /* Wifi */
+ sdmmc1: mmc@78000000 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ assigned-clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+ assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+ assigned-clock-rates = <82000000>;
+
+ max-frequency = <82000000>;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ bus-width = <4>;
+ non-removable;
+
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+
+ nvidia,default-tap = <0x2>;
+ nvidia,default-trim = <0x2>;
+
+ vmmc-supply = <&vdd_3v3_com>;
+ vqmmc-supply = <&vdd_1v8_vio>;
+ };
+
+ /* MicroSD */
+ sdmmc3: mmc@78000400 {
+ status = "okay";
+ bus-width = <4>;
+
+ sd-uhs-ddr50;
+
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+
+ nvidia,default-tap = <0x3>;
+ nvidia,default-trim = <0x3>;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vddio_usd>;
+ };
+
/* eMMC */
- mmc@78000600 {
+ sdmmc4: mmc@78000600 {
status = "okay";
bus-width = <8>;
+
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
non-removable;
+
+ vmmc-supply = <&vcore_emmc>;
+ vqmmc-supply = <&vdd_1v8_vio>;
};
/* Micro USB */
--
2.53.0
next prev parent reply other threads:[~2026-11-22 20:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 20:13 [PATCH v1 00/18] [WIP] ARM: tegra: Update Tegra Note 7 configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 01/18] dt-bindings: ARM: tegra: Document Tegra Note 7 variants Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 02/18] ARM: tegra: Diverge Tegra Note 7 device tree to support its common versions Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 03/18] ARM: tegra: tegratab: Upgrade powerlines configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 04/18] ARM: tegra: tegratab: Add pinmux node Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 05/18] ARM: tegra: tegratab: Bind VDE device Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 06/18] ARM: tegra: tegratab: Configure USB and power supply Svyatoslav Ryhel
2026-11-22 20:13 ` Svyatoslav Ryhel [this message]
2026-11-22 20:13 ` [PATCH v1 08/18] ARM: tegra: tegratab: Configure wireless devices Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 09/18] ARM: tegra: tegratab: Add thermal configuration Svyatoslav Ryhel
2026-11-22 20:13 ` [PATCH v1 10/18] ARM: tegra: tegratab: Configure HDMI Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 11/18] ARM: tegra: tegratab: Add audio codec and sound card configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 12/18] ARM: tegra: tegratab: Add common sensor nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 13/18] ARM: tegra: tegratab: Add MC and EMC timing nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 14/18] ARM: tegra: tegratab: Add CPU DFLL clock node Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 15/18] ARM: tegra: tegratab: Update GPIO keys and switches Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 16/18] ARM: tegra: tegratab: Update aliases, chosen and memory nodes Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 17/18] ARM: tegra: tegratab: Add video input configuration Svyatoslav Ryhel
2026-11-22 20:14 ` [PATCH v1 18/18] ARM: tegra: tegratab: Add panel rotation Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122201407.23742-8-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mperttunen@nvidia.com \
--cc=robh@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox