Re: [PATCH 3/9] pinctrl: stm32: Introduce HDP driver

[Krzysztof Kozlowski <krzk@kernel.org>]

On 25/02/2025 09:48, Clément Le Goffic wrote:
> This patch introduce the driver for the Hardware Debug Port available on

Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

> STM32MP platforms. The HDP allows the observation of internal SoC
> signals by using multiplexers. Each HDP port can provide up to 16
> internal signals (one of them can be software controlled as a GPO)



....

> +
> +static int stm32_hdp_suspend(struct device *dev)
> +{
> +	struct stm32_hdp *hdp = dev_get_drvdata(dev);
> +
> +	hdp->gposet_conf = readl_relaxed(hdp->base + HDP_GPOSET);
> +
> +	pinctrl_pm_select_sleep_state(dev);
> +
> +	clk_disable_unprepare(hdp->clk);
> +
> +	return 0;
> +}
> +
> +static int stm32_hdp_resume(struct device *dev)
> +{
> +	struct stm32_hdp *hdp = dev_get_drvdata(dev);
> +	int err;
> +
> +	err = clk_prepare_enable(hdp->clk);
> +	if (err)
> +		return dev_err_probe(hdp->dev, err, "Failed to prepare_enable clk");


That's wrong, it is not a probe path.

> +
> +	writel_relaxed(HDP_CTRL_ENABLE, hdp->base + HDP_CTRL);
> +	writel_relaxed(hdp->gposet_conf, hdp->base + HDP_GPOSET);
> +	writel_relaxed(hdp->mux_conf, hdp->base + HDP_MUX);
> +
> +	pinctrl_pm_select_default_state(dev);
> +
> +	return 0;
> +}
> +
> +DEFINE_SIMPLE_DEV_PM_OPS(stm32_hdp_pm_ops, stm32_hdp_suspend, stm32_hdp_resume);
> +
> +static struct platform_driver stm32_hdp_driver = {
> +	.probe = stm32_hdp_probe,
> +	.remove = stm32_hdp_remove,
> +	.driver = {
> +		.name = DRIVER_NAME,
> +		.pm = pm_sleep_ptr(&stm32_hdp_pm_ops),
> +		.of_match_table = stm32_hdp_of_match,
> +	}
> +};
> +
> +module_platform_driver(stm32_hdp_driver);
> +
> +MODULE_ALIAS("platform:" DRIVER_NAME);


You should not need MODULE_ALIAS() in normal cases. If you need it,
usually it means your device ID table is wrong (e.g. misses either
entries or MODULE_DEVICE_TABLE()). MODULE_ALIAS() is not a substitute
for incomplete ID table.




Best regards,
Krzysztof