Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
* Compaq Presario 901AT / RedHat 8.0 hiccup
@ 2003-01-28  9:35 Dexy
  2003-01-28 10:19 ` EB3CZS Xavier Crehueras
  0 siblings, 1 reply; 2+ messages in thread
From: Dexy @ 2003-01-28  9:35 UTC (permalink / raw)
  To: linux-hams

Greetings, all

   I tried Mandrake 6.5 on this machine, but couldn't get the screen to set
up.  Someone suggested newer linux, so I downloaded RH8 and made a bootable
CD install set.  The Disk 1 boots fine, but it only gets as far as the
partition check (bear with me, this was written down from the screen):

Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 80
PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using
pci=biosirq
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MHR2020AT, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: Compaq CRN-8245B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
ide1 at 0x170-0x177, 0x376 on irq 15
hda: 39070080 sectors (20004MB) w/2048KiB Cache, CHS=2432/255/63, (U)DMA
hdc: ATAPI 24x CD-ROM drive, 128KB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
Partition check:
    hda:spurious 8259A interrupt: IRQ7

   (there is a pause at hda: then spurious... comes up)
   At this point the machine locks up, with the drive light lit.

   Using pci=biosirq (see line 4 above) makes no difference.  What is device
00:10.0?

   The partition it is checking is the default 18GB WinXP.  Is it actually
checking this?  I'd have thought it would be hda1, but it's only showing as
hda.  I've left the machine going for 1/2-hour, it surely would have checked
it by then if it was going to.

   IRQ7 is usually something to do with the // port, no?  Then why is it
happening during boot?  There's a facility do disable the port during boot,
but this makes no difference, nor does changing from Bi-dir to EPP to
EPP/ECP.

   Incidentally, the // port is the reason I'm trying linux - XP trashes it
as far as use for "Push to talk" for an Amateur Radio transciever, and
there's no Com port I can use :-(.  It works fine under 98se, but I can't
get screen drivers.

   Is there anyone out there who can give me tips on how to get this going?

Cheers
Dex ZL2DEX




^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: Compaq Presario 901AT / RedHat 8.0 hiccup
  2003-01-28  9:35 Compaq Presario 901AT / RedHat 8.0 hiccup Dexy
@ 2003-01-28 10:19 ` EB3CZS Xavier Crehueras
  0 siblings, 0 replies; 2+ messages in thread
From: EB3CZS Xavier Crehueras @ 2003-01-28 10:19 UTC (permalink / raw)
  To: Dexy; +Cc: linux-hams

Hello all,

I just installed Debian GNU/Linux 3.0 woody on a Compaq Presario 920 a few days ago. I had to install it with a 2.2 kernel because the 2.4 kernel kept locking on boot with a CPU exception. Once installed, I compiled a kernel 2.4.19 and it worked with the exception of pcmcia. Loading pcmcia cardmgr crashed the kernel with a CPU exception.

Hope this helps.
73s de Xavi

On Tue, 28 Jan 2003 22:35:47 +1300
"Dexy" <dexy@ihug.co.nz> wrote:

> Greetings, all
> 
>    I tried Mandrake 6.5 on this machine, but couldn't get the screen to set
> up.  Someone suggested newer linux, so I downloaded RH8 and made a bootable
> CD install set.  The Disk 1 boots fine, but it only gets as far as the
> partition check (bear with me, this was written down from the screen):
> 
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ALI15X3: IDE controller on PCI bus 00 dev 80
> PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using
> pci=biosirq
> ALI15X3: chipset revision 196
> ALI15X3: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
> hda: FUJITSU MHR2020AT, ATA DISK drive
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hdc: Compaq CRN-8245B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
> ide1 at 0x170-0x177, 0x376 on irq 15
> hda: 39070080 sectors (20004MB) w/2048KiB Cache, CHS=2432/255/63, (U)DMA
> hdc: ATAPI 24x CD-ROM drive, 128KB Cache
> Uniform CD-ROM driver Revision: 3.12
> ide-floppy driver 0.99.newide
> Partition check:
>     hda:spurious 8259A interrupt: IRQ7
> 
>    (there is a pause at hda: then spurious... comes up)
>    At this point the machine locks up, with the drive light lit.
> 
>    Using pci=biosirq (see line 4 above) makes no difference.  What is device
> 00:10.0?
> 
>    The partition it is checking is the default 18GB WinXP.  Is it actually
> checking this?  I'd have thought it would be hda1, but it's only showing as
> hda.  I've left the machine going for 1/2-hour, it surely would have checked
> it by then if it was going to.
> 
>    IRQ7 is usually something to do with the // port, no?  Then why is it
> happening during boot?  There's a facility do disable the port during boot,
> but this makes no difference, nor does changing from Bi-dir to EPP to
> EPP/ECP.
> 
>    Incidentally, the // port is the reason I'm trying linux - XP trashes it
> as far as use for "Push to talk" for an Amateur Radio transciever, and
> there's no Com port I can use :-(.  It works fine under 98se, but I can't
> get screen drivers.
> 
>    Is there anyone out there who can give me tips on how to get this going?
> 
> Cheers
> Dex ZL2DEX
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 

73 de Xavi EB3CZS
JN11bl

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2003-01-28 10:19 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-28  9:35 Compaq Presario 901AT / RedHat 8.0 hiccup Dexy
2003-01-28 10:19 ` EB3CZS Xavier Crehueras

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox