Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
* soundmodem/ax25 newbie questions.
@ 2003-03-30  9:18 Aaron May
  2003-03-31 19:57 ` pa3gcu
  0 siblings, 1 reply; 3+ messages in thread
From: Aaron May @ 2003-03-30  9:18 UTC (permalink / raw)
  To: Linux Hams

I have just finished trying to install the soundmodem kernel drivers, only to 
find it doesn't like my sound card. The sound card is an on-board VIA 
chipset, and in the BIOS it has an option to enable the legacy sound-blaster 
on 0x220, irq5 dma 1, however when I try to ifconfig it up, the system log 
reports no sb at that location. So my sound card will not work? (further 
details at www.amayzing.co.nz/aaron/?page=045 if you are interested.)

So I moved on to the soundmodem usermode (?) version. I have happily got it 
working to the point that text scrolls down the screen in kiss mode, proving 
that my cables work.

When I try it in mkiss mode, it results in an error: 

sm[1187]: ioctl: TIOCSETD: Invalid argument (22).

I'm unsure if it means anything, but the line written as I come out of 
soundmodemconfig says:  "selection: cfg: - chan: -"

I more suspect that ax25 needs some more configuration? I haven't found any 
doco/howto that makes sense to me about mkiss (I really am a newbie).

Also If someone could point me at a simple packet terminal program? 

Any help would be appreciated. 
Cheers, Aaron ZL3UAR.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: soundmodem/ax25 newbie questions.
  2003-03-30  9:18 soundmodem/ax25 newbie questions Aaron May
@ 2003-03-31 19:57 ` pa3gcu
  2003-03-31 21:41   ` Tomi Manninen
  0 siblings, 1 reply; 3+ messages in thread
From: pa3gcu @ 2003-03-31 19:57 UTC (permalink / raw)
  To: Aaron May, Linux Hams

On Sunday 30 March 2003 09:18, Aaron May wrote:
> I have just finished trying to install the soundmodem kernel drivers, only
> to find it doesn't like my sound card. The sound card is an on-board VIA
> chipset, and in the BIOS it has an option to enable the legacy
> sound-blaster on 0x220, irq5 dma 1, however when I try to ifconfig it up,
> the system log reports no sb at that location. So my sound card will not
> work? (further details at www.amayzing.co.nz/aaron/?page=045 if you are
> interested.)
>
> So I moved on to the soundmodem usermode (?) version. I have happily got it
> working to the point that text scrolls down the screen in kiss mode,
> proving that my cables work.
>
> When I try it in mkiss mode, it results in an error:
>
> sm[1187]: ioctl: TIOCSETD: Invalid argument (22).

I did not reply to this one because i dont use a soundcard at all for packet, 
however considering i've seen no replys i will tell you what,
"ioctl: TIOCSETD" normally means, it means that at the time you gave the 
command no mkiss was found in your kernel or no mkiss module was loaded.
I hope i am correct here as i dont know what "Invalid argument (22)" is, i 
did a quick search in the kernel source but it showed nothing.

If your mkiss support is in module form then you need to have the following 
in your /etc/modules.conf file.

alias tty-ldisc-5 mkiss 

If i am completely wrong please accept my humble appols...

> I'm unsure if it means anything, but the line written as I come out of
> soundmodemconfig says:  "selection: cfg: - chan: -"
>
> I more suspect that ax25 needs some more configuration? I haven't found any
> doco/howto that makes sense to me about mkiss (I really am a newbie).
>
> Also If someone could point me at a simple packet terminal program?
>
> Any help would be appreciated.
> Cheers, Aaron ZL3UAR.

-- 
Regards Richard
pa3gcu@zeelandnet.nl
http://people.zeelandnet.nl/pa3gcu/


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: soundmodem/ax25 newbie questions.
  2003-03-31 19:57 ` pa3gcu
@ 2003-03-31 21:41   ` Tomi Manninen
  0 siblings, 0 replies; 3+ messages in thread
From: Tomi Manninen @ 2003-03-31 21:41 UTC (permalink / raw)
  To: Linux Hams

On Mon, 31 Mar 2003, pa3gcu wrote:

> On Sunday 30 March 2003 09:18, Aaron May wrote:

> > sm[1187]: ioctl: TIOCSETD: Invalid argument (22).
> 
> I did not reply to this one because i dont use a soundcard at all for packet, 
> however considering i've seen no replys i will tell you what,
> "ioctl: TIOCSETD" normally means, it means that at the time you gave the 
> command no mkiss was found in your kernel or no mkiss module was loaded.
> I hope i am correct here as i dont know what "Invalid argument (22)" is, i 
> did a quick search in the kernel source but it showed nothing.

22 is the error number for EINVAL or "Invalid argument" (in i386 anyway).
See the "errno" manual page and /usr/include/asm/errno.h.

Anyway Richard's diagnose is probably right.

> If your mkiss support is in module form then you need to have the following 
> in your /etc/modules.conf file.
> 
> alias tty-ldisc-5 mkiss 

Also Aaron could try to load it explicitly with "modprobe mkiss".

-- 
Tomi Manninen           Internet:  oh2bns@sral.fi
OH2BNS                  AX.25:     oh2bns@oh2rbi.fin.eu
KP20ME04                Amprnet:   oh2bns@oh2rbi.ampr.org


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2003-03-31 21:41 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-03-30  9:18 soundmodem/ax25 newbie questions Aaron May
2003-03-31 19:57 ` pa3gcu
2003-03-31 21:41   ` Tomi Manninen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox