Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
* Ubuntu 8.10 and AX25
@ 2008-10-05 17:34 Christof Bodner
  2008-10-05 18:09 ` don
  0 siblings, 1 reply; 3+ messages in thread
From: Christof Bodner @ 2008-10-05 17:34 UTC (permalink / raw)
  To: linux-hams

Hi!

I have a SignaLink USB device and it's working fine, except AX25 in
Linux (mhm, so it's not really working fine, isn't it?)

If I start it with
sudo mdprobe mkiss
sudo soundmodem -v 5

I get 

---
sm[10003]: mkiss: ifname ax0 mtu 256 hwaddr OE8BCK-1 ipaddr 10.0.0.1
netmask 255.255.255.0 broadcast 10.0.0.255
sm[10003]: audio: starting "/dev/dsp2"
sm[10003]: audio: sample rate 9600 input fragsz 256 numfrags 512 output
fragsz 256 numfrags 820
sm[10003]: unknown kiss packet: 0x80 0xa2
sm[10003]: unknown kiss packet: 0x20 0xa2
Tx: fm OE8BCK-1 to QST-0 UI  pid=CC
...
---

Then a lot of Tx frames are sent (would be sent if I would switch in
TX) 

Does anybody know hoe to turn it off at Ubuntu 8.10? 

And then, exactly ONE RX frame is captured, e.g.

Rx: fm OE1UHA-9 to TX0R18-0 via OE1XQR-0,WIDE2-0 UIv pid=F0
`,.Xmz3>/ON THE ROAD

dmesg gives the output:
[ 4763.523335] usb 5-2.1.4: configuration #1 chosen from 1 choice
[ 4763.525286] input: Burr-Brown from TI               USB Audio CODEC
as /class/input/input6
[ 4763.527643] input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI
USB Audio CODEC ] on usb-0000:01:09.2-2.1.4
[ 4764.858704] usbcore: registered new interface driver snd-usb-audio
[ 4834.952618] NET: Registered protocol family 3
[ 4835.007632] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[ 4850.084131] mkiss: ax0: crc mode is auto.
[ 4850.160087] mkiss: ax0: Trying crc-smack
[ 4850.316183] mkiss: ax0: Trying crc-flexnet

Some other correct RX-frames can be received by restarting soundmodem.
So why do I have to restart soundmodem given this result?
---
sm[10313]: mkiss: ifname ax0 mtu 256 hwaddr OE8BCK-1 ipaddr 10.0.0.1
netmask 255.255.255.0 broadcast 10.0.0.255
sm[10313]: audio: starting "/dev/dsp2"
sm[10313]: audio: sample rate 9600 input fragsz 256 numfrags 512 output
fragsz 256 numfrags 820
sm[10313]: unknown kiss packet: 0x80 0xa2
sm[10313]: unknown kiss packet: 0x20 0xa2
Tx: fm OE8BCK-1 to QST-0 UI  pid=CC
...
--- 

It's a little bit annoying to restart soundmodem each minute, so I need
your tips.

73 de christof, oe8bck

-- 
             (0-0)
---------oOO--(_)--OOo-----------------------------------------------
 Christof Bodner <oe8bck@gmx.net>
   Linux - Life is too short for reboots
         - First they ignore you. Then they laugh at you. Then they
           fight you(*). Then you win. -- Ghandi
---------------------------------------------------------------------
email: mailto:oe8bck@gmx.net
---------------------------------------------------------------------
GnuPG public key: 0xB15DA60F (http://wwwkeys.eu.pgp.net)
Fingerprint 5222 4DEA 773A 60B3 22F9  D244 15EF 6645 B15D A60F
---------------------------------------------------------------------



^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Ubuntu 8.10 and AX25
  2008-10-05 17:34 Ubuntu 8.10 and AX25 Christof Bodner
@ 2008-10-05 18:09 ` don
  2008-10-06 17:53   ` Christof Bodner
  0 siblings, 1 reply; 3+ messages in thread
From: don @ 2008-10-05 18:09 UTC (permalink / raw)
  To: Christof Bodner; +Cc: linux-hams

[-- Attachment #1: Type: text/plain, Size: 931 bytes --]

On Sun, Oct 05, 2008 at 07:34:14PM +0200, Christof Bodner wrote:
> Hi!
> 
> I have a SignaLink USB device and it's working fine, except AX25 in
> Linux (mhm, so it's not really working fine, isn't it?)

I too have been having problems with Ubuntu 8.04, while 7.10 worked.

> ...
> Tx: fm OE8BCK-1 to QST-0 UI  pid=CC
> ...
> ---
> 
> Then a lot of Tx frames are sent (would be sent if I would switch in
> TX) 
> 
> Does anybody know hoe to turn it off at Ubuntu 8.10? 

Some of these can be turned off in /etc/avahi/avahi-daemon.conf
I will attach my file.

With that, I stll get some messages about gpgkeys which I have
not figured out yet.


> And then, exactly ONE RX frame is captured, e.g.
> 
> Rx: fm OE1UHA-9 to TX0R18-0 via OE1XQR-0,WIDE2-0 UIv pid=F0
> `,.Xmz3>/ON THE ROAD

My other problem is not getting any Rx (under 8.04).

Can you tell me what alsa packages you have?
I ran "dpkg -l | grep alsa".  

-- 
Don - W7DMR

[-- Attachment #2: avahi-daemon.conf --]
[-- Type: text/plain, Size: 1604 bytes --]

# $Id: avahi-daemon.conf 1463 2007-05-08 22:50:58Z lennart $
#
# This file is part of avahi.
# 
# avahi is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2 of the
# License, or (at your option) any later version.
#
# avahi is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with avahi; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.

# See avahi-daemon.conf(5) for more information on this configuration
# file!

[server]
#host-name=foo
#domain-name=local
#browse-domains=0pointer.de, zeroconf.org
use-ipv4=yes
use-ipv6=no
#check-response-ttl=no
#use-iff-running=no
#enable-dbus=yes
#disallow-other-stacks=no
#allow-point-to-point=no

[wide-area]
enable-wide-area=yes

[publish]
disable-publishing=yes
#disable-user-service-publishing=no
#add-service-cookie=no
publish-addresses=no
publish-hinfo=no
publish-workstation=no
publish-domain=no
#publish-dns-servers=192.168.50.1, 192.168.50.2
#publish-resolv-conf-dns-servers=yes
#publish-aaaa-on-ipv4=yes
#publish-a-on-ipv6=no

[reflector]
#enable-reflector=no
#reflect-ipv=no

[rlimits]
#rlimit-as=
rlimit-core=0
rlimit-data=4194304
rlimit-fsize=0
rlimit-nofile=30
rlimit-stack=4194304
rlimit-nproc=3

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Ubuntu 8.10 and AX25
  2008-10-05 18:09 ` don
@ 2008-10-06 17:53   ` Christof Bodner
  0 siblings, 0 replies; 3+ messages in thread
From: Christof Bodner @ 2008-10-06 17:53 UTC (permalink / raw)
  To: don; +Cc: linux-hams

[-- Attachment #1: Type: text/plain, Size: 2693 bytes --]

Hi!

Thanks for your answer! IIRC, it worked for me in Ubuntu 7.10. But I
would like to see it working again. 

dpkg -l | grep alsa
ii  alsa-base                                 1.0.17.dfsg-2ubuntu1
ALSA driver configuration files
ii  alsa-utils                                1.0.17-0ubuntu2
ALSA utilities
ii  gstreamer0.10-alsa                        0.10.20-1
GStreamer plugin for ALSA
ii  libesd-alsa0                              0.2.40-0ubuntu1
Enlightened Sound Daemon (ALSA) - Shared libr
ii  libpt-1.10.10-plugins-alsa                1.10.10-2ubuntu2
Portable Windows Library Audio Plugin for the
ii  libsdl1.2debian-alsa                      1.2.13-2ubuntu1
Simple DirectMedia Layer (with X11 and ALSA o

I also attached my /etc/ax25/soundmodem.conf. There you can see that I
use mkiss at /dev/dsp2, as I do not exactly know te difference to kiss
(besides I have to use kissattach in the latter). I also tried to use
soundmodem -R -M. It worls a little bit longer, but not very much.

73 de oe8bck

Am Sonntag, den 05.10.2008, 11:09 -0700 schrieb don:
> On Sun, Oct 05, 2008 at 07:34:14PM +0200, Christof Bodner wrote:
> > Hi!
> > 
> > I have a SignaLink USB device and it's working fine, except AX25 in
> > Linux (mhm, so it's not really working fine, isn't it?)
> 
> I too have been having problems with Ubuntu 8.04, while 7.10 worked.
> 
> > ...
> > Tx: fm OE8BCK-1 to QST-0 UI  pid=CC
> > ...
> > ---
> > 
> > Then a lot of Tx frames are sent (would be sent if I would switch in
> > TX) 
> > 
> > Does anybody know hoe to turn it off at Ubuntu 8.10? 
> 
> Some of these can be turned off in /etc/avahi/avahi-daemon.conf
> I will attach my file.
> 
> With that, I stll get some messages about gpgkeys which I have
> not figured out yet.
> 
> 
> > And then, exactly ONE RX frame is captured, e.g.
> > 
> > Rx: fm OE1UHA-9 to TX0R18-0 via OE1XQR-0,WIDE2-0 UIv pid=F0
> > `,.Xmz3>/ON THE ROAD
> 
> My other problem is not getting any Rx (under 8.04).
> 
> Can you tell me what alsa packages you have?
> I ran "dpkg -l | grep alsa".  
> 
-- 
             (0-0)
---------oOO--(_)--OOo-----------------------------------------------
 Christof Bodner <oe8bck@gmx.net>
   Linux - Life is too short for reboots
         - First they ignore you. Then they laugh at you. Then they
           fight you(*). Then you win. -- Ghandi
---------------------------------------------------------------------
email: mailto:oe8bck@gmx.net
---------------------------------------------------------------------
GnuPG public key: 0xB15DA60F (http://wwwkeys.eu.pgp.net)
Fingerprint 5222 4DEA 773A 60B3 22F9  D244 15EF 6645 B15D A60F
---------------------------------------------------------------------


[-- Attachment #2: soundmodem.conf --]
[-- Type: application/xml, Size: 565 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2008-10-06 17:53 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-05 17:34 Ubuntu 8.10 and AX25 Christof Bodner
2008-10-05 18:09 ` don
2008-10-06 17:53   ` Christof Bodner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox