From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
Slawomir Stepien <sst@poczta.fm>,
Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 23/40] hwmon: (lm90) Add flag to indicate support for minimum temperature limits
Date: Wed, 25 May 2022 06:57:41 -0700 [thread overview]
Message-ID: <20220525135758.2944744-24-linux@roeck-us.net> (raw)
In-Reply-To: <20220525135758.2944744-1-linux@roeck-us.net>
A flag indicating support for minimum temperature limits doesn't cost much
and will enable us to add support for MAX6642 to the lm90 driver.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/lm90.c | 54 +++++++++++++++++++++++++-------------------
1 file changed, 31 insertions(+), 23 deletions(-)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 22ea75535ab4..abf1451c5652 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -192,6 +192,7 @@ enum chips { adm1032, adt7461, adt7461a, adt7481, g781, lm86, lm90, lm99,
#define LM90_HAVE_PARTIAL_PEC BIT(12) /* Partial PEC support (adm1032)*/
#define LM90_HAVE_ALARMS BIT(13) /* Create 'alarms' attribute */
#define LM90_HAVE_EXT_UNSIGNED BIT(14) /* extended unsigned temperature*/
+#define LM90_HAVE_LOW BIT(15) /* low limits */
/* LM90 status */
#define LM90_STATUS_LTHRM BIT(0) /* local THERM limit tripped */
@@ -369,7 +370,8 @@ static const struct lm90_params lm90_params[] = {
[adm1032] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT
- | LM90_HAVE_PARTIAL_PEC | LM90_HAVE_ALARMS,
+ | LM90_HAVE_PARTIAL_PEC | LM90_HAVE_ALARMS
+ | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
@@ -382,7 +384,7 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
| LM90_HAVE_CRIT | LM90_HAVE_PARTIAL_PEC
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 10,
.resolution = 10,
@@ -390,7 +392,8 @@ static const struct lm90_params lm90_params[] = {
[adt7461a] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
- | LM90_HAVE_CRIT | LM90_HAVE_PEC | LM90_HAVE_ALARMS,
+ | LM90_HAVE_CRIT | LM90_HAVE_PEC | LM90_HAVE_ALARMS
+ | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 10,
},
@@ -398,7 +401,7 @@ static const struct lm90_params lm90_params[] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
| LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_PEC
- | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT,
+ | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT | LM90_HAVE_LOW,
.alert_alarms = 0x1c7c,
.max_convrate = 11,
.resolution = 10,
@@ -407,58 +410,58 @@ static const struct lm90_params lm90_params[] = {
[g781] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
[lm86] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT | LM90_HAVE_ALARMS,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[lm90] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT | LM90_HAVE_ALARMS,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[lm99] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
- | LM90_HAVE_CRIT | LM90_HAVE_ALARMS,
+ | LM90_HAVE_CRIT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7b,
.max_convrate = 9,
},
[max6646] = {
.flags = LM90_HAVE_CRIT | LM90_HAVE_BROKEN_ALERT
- | LM90_HAVE_EXT_UNSIGNED | LM90_HAVE_ALARMS,
+ | LM90_HAVE_EXT_UNSIGNED | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6648] = {
.flags = LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_CRIT
- | LM90_HAVE_BROKEN_ALERT,
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6654] = {
- .flags = LM90_HAVE_BROKEN_ALERT | LM90_HAVE_ALARMS,
+ .flags = LM90_HAVE_BROKEN_ALERT | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 7,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6657] = {
.flags = LM90_PAUSE_FOR_CONFIG | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
[max6659] = {
.flags = LM90_HAVE_EMERGENCY | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 8,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
@@ -471,14 +474,14 @@ static const struct lm90_params lm90_params[] = {
*/
.flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT
| LM90_HAVE_CRIT_ALRM_SWP | LM90_HAVE_BROKEN_ALERT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
[max6696] = {
.flags = LM90_HAVE_EMERGENCY
| LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3 | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x1c7c,
.max_convrate = 6,
.reg_status2 = MAX6696_REG_STATUS2,
@@ -486,7 +489,7 @@ static const struct lm90_params lm90_params[] = {
},
[w83l771] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 8,
},
@@ -497,7 +500,7 @@ static const struct lm90_params lm90_params[] = {
* be set).
*/
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7b,
.max_convrate = 9,
.reg_local_ext = SA56004_REG_LOCAL_TEMPL,
@@ -505,7 +508,7 @@ static const struct lm90_params lm90_params[] = {
[tmp451] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT
- | LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_ALARMS,
+ | LM90_HAVE_UNSIGNED_TEMP | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 9,
.resolution = 12,
@@ -514,7 +517,7 @@ static const struct lm90_params lm90_params[] = {
[tmp461] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP | LM90_HAVE_CRIT
- | LM90_HAVE_ALARMS,
+ | LM90_HAVE_ALARMS | LM90_HAVE_LOW,
.alert_alarms = 0x7c,
.max_convrate = 9,
.resolution = 12,
@@ -2161,10 +2164,15 @@ static int lm90_probe(struct i2c_client *client)
info->type = hwmon_temp;
info->config = data->channel_config;
- data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
- HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM;
- data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
- HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM | HWMON_T_FAULT;
+ data->channel_config[0] = HWMON_T_INPUT | HWMON_T_MAX |
+ HWMON_T_MAX_ALARM;
+ data->channel_config[1] = HWMON_T_INPUT | HWMON_T_MAX |
+ HWMON_T_MAX_ALARM | HWMON_T_FAULT;
+
+ if (data->flags & LM90_HAVE_LOW) {
+ data->channel_config[0] |= HWMON_T_MIN | HWMON_T_MIN_ALARM;
+ data->channel_config[1] |= HWMON_T_MIN | HWMON_T_MIN_ALARM;
+ }
if (data->flags & LM90_HAVE_CRIT) {
data->channel_config[0] |= HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_CRIT_HYST;
--
2.35.1
next prev parent reply other threads:[~2022-05-25 14:00 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 13:57 [PATCH 00/40] hwmon: (lm90) Various improvements to lm90 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 01/40] hwmon: (lm90) Generate sysfs and udev events for all alarms Guenter Roeck
2022-05-25 13:57 ` [PATCH 02/40] hwmon: (lm90) Rework alarm/status handling Guenter Roeck
2022-05-25 13:57 ` [PATCH 03/40] hwmon: (lm90) Reorder include files in alphabetical order Guenter Roeck
2022-05-25 13:57 ` [PATCH 04/40] hwmon: (lm90) Reorder chip enumeration to be " Guenter Roeck
2022-05-25 13:57 ` [PATCH 05/40] hwmon: (lm90) Use BIT macro Guenter Roeck
2022-05-25 13:57 ` [PATCH 06/40] hwmon: (lm90) Move status register bit shifts to compile time Guenter Roeck
2022-05-25 13:57 ` [PATCH 07/40] hwmon: (lm90) Stop using R_/W_ register prefix Guenter Roeck
2022-05-25 13:57 ` [PATCH 08/40] hwmon: (lm90) Improve PEC support Guenter Roeck
2022-05-25 13:57 ` [PATCH 09/40] hwmon: (lm90) Add partial PEC support for ADT7461 Guenter Roeck
2022-05-25 13:57 ` [PATCH 10/40] hwmon: (lm90) Enable full PEC support for ADT7461A Guenter Roeck
2022-05-25 13:57 ` [PATCH 11/40] hwmon: (lm90) Add support for unsigned and signed temperatures Guenter Roeck
2022-05-25 13:57 ` [PATCH 12/40] hwmon: (lm90) Only re-read registers if volatile Guenter Roeck
2022-05-25 13:57 ` [PATCH 13/40] hwmon: (lm90) Support multiple temperature resolutions Guenter Roeck
2022-05-26 7:12 ` Slawomir Stepien
2022-05-26 14:32 ` Guenter Roeck
2022-05-25 13:57 ` [PATCH 14/40] hwmon: (lm90) Use single flag to indicate extended temperature support Guenter Roeck
2022-05-25 13:57 ` [PATCH 15/40] hwmon: (lm90) Rework detect function Guenter Roeck
2022-05-25 13:57 ` [PATCH 16/40] hwmon: (lm90) Add support for additional chip revision of NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 17/40] hwmon: (lm90) Fix/Add detection of G781-1 Guenter Roeck
2022-05-25 13:57 ` [PATCH 18/40] hwmon: (lm90) Add flag to indicate 'alarms' attribute support Guenter Roeck
2022-05-25 13:57 ` [PATCH 19/40] hwmon: (lm90) Add explicit support for MAX6648/MAX6692 Guenter Roeck
2022-05-25 13:57 ` [PATCH 20/40] hwmon: (lm90) Add support for ADT7481, ADT7482, and ADT7483 Guenter Roeck
2022-05-27 5:08 ` Slawomir Stepien
2022-05-25 13:57 ` [PATCH 21/40] hwmon: (lm90) Strengthen chip detection for ADM1032, ADT7461(A), and NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 22/40] hwmon: (lm90) Add support for MAX6690 Guenter Roeck
2022-05-25 13:57 ` Guenter Roeck [this message]
2022-05-25 13:57 ` [PATCH 24/40] hwmon: (lm90) Add flag to indicate conversion rate support Guenter Roeck
2022-05-25 13:57 ` [PATCH 25/40] hwmon: (lm90) Add support for MAX6642 Guenter Roeck
2022-05-25 13:57 ` [PATCH 26/40] hwmon: (lm90) Let lm90_read16() handle 8-bit read operations Guenter Roeck
2022-05-25 13:57 ` [PATCH 27/40] hwmon: (lm90) Introduce 16-bit register write function Guenter Roeck
2022-05-25 13:57 ` [PATCH 28/40] hwmon: (lm90) Support MAX1617 and LM84 Guenter Roeck
2022-05-25 13:57 ` [PATCH 29/40] hwmon: (lm90) Add support for ADM1021, ADM1021A, and ADM1023 Guenter Roeck
2022-05-25 13:57 ` [PATCH 30/40] hwmon: (lm90) Add remaining chips supported by adm1021 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 31/40] hwmon: (lm90) Combine lm86 and lm90 configuration Guenter Roeck
2022-05-25 13:57 ` [PATCH 32/40] hwmon: (lm90) Add explicit support for NCT210 Guenter Roeck
2022-05-25 13:57 ` [PATCH 33/40] hwmon: (lm90) Add support for ON Semiconductor NCT214 and NCT72 Guenter Roeck
2022-05-25 13:57 ` [PATCH 34/40] hwmon: (lm90) Add support for ON Semiconductor NCT218 Guenter Roeck
2022-05-25 13:57 ` [PATCH 35/40] hwmon: (lm90) Add support for ADT7421 Guenter Roeck
2022-05-25 13:57 ` [PATCH 36/40] hwmon: (lm90) Only disable alerts if not already disabled Guenter Roeck
2022-05-25 13:57 ` [PATCH 37/40] hwmon: (lm90) Add explicit support for ADM1020 Guenter Roeck
2022-05-25 13:57 ` [PATCH 38/40] hwmon: (lm90) Add support and detection of Philips/NXP NE1618 Guenter Roeck
2022-05-25 13:57 ` [PATCH 39/40] hwmon: (lm90) Add table with supported Analog/ONSEMI devices Guenter Roeck
2022-05-25 13:57 ` [PATCH 40/40] hwmon: (lm90) Support temp_samples attribute Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220525135758.2944744-24-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sst@poczta.fm \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox