Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
	Slawomir Stepien <sst@poczta.fm>,
	Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 39/40] hwmon: (lm90) Add table with supported Analog/ONSEMI devices
Date: Wed, 25 May 2022 06:57:57 -0700	[thread overview]
Message-ID: <20220525135758.2944744-40-linux@roeck-us.net> (raw)
In-Reply-To: <20220525135758.2944744-1-linux@roeck-us.net>

Add table with device names and known register values for supported
devices from Analog / ON Semiconductor.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/lm90.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 77102e0a4440..7f8397c362e8 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1828,6 +1828,42 @@ static const char *lm90_detect_analog(struct i2c_client *client, bool common_add
 	if (status < 0 || config2 < 0 || man_id2 < 0 || chip_id2 < 0)
 		return NULL;
 
+	/*
+	 * The following chips should be detected by this function. Known
+	 * register values are listed. Registers 0x3d .. 0x3e are undocumented
+	 * for most of the chips, yet appear to return a well defined value.
+	 * Register 0xff is undocumented for some of the chips. Register 0x3f
+	 * is undocumented for all chips, but also returns a well defined value.
+	 * Values are as reported from real chips unless mentioned otherwise.
+	 * The code below checks values for registers 0x3d, 0x3e, and 0xff,
+	 * but not for register 0x3f.
+	 *
+	 * Chip			Register
+	 *		3d	3e	3f	fe	ff	Notes
+	 * ----------------------------------------------------------
+	 * adm1020	00	00	00	41	39
+	 * adm1021	00	00	00	41	03
+	 * adm1021a	00	00	00	41	3c
+	 * adm1023	00	00	00	41	3c	same as adm1021a
+	 * adm1032	00	00	00	41	42
+	 *
+	 * adt7421	21	41	04	41	04
+	 * adt7461	00	00	00	41	51
+	 * adt7461a	61	41	05	41	57
+	 * adt7481	81	41	02	41	62
+	 * adt7482	-	-	-	41	65	datasheet
+	 *		82	41	05	41	75	real chip
+	 * adt7483	83	41	04	41	94
+	 *
+	 * nct72	61	41	07	41	55
+	 * nct210	00	00	00	41	3f
+	 * nct214	61	41	08	41	5a
+	 * nct1008	-	-	-	41	57	datasheet rev. 3
+	 *		61	41	06	41	54	real chip
+	 *
+	 * nvt210	-	-	-	41	-	datasheet
+	 * nvt211	-	-	-	41	-	datasheet
+	 */
 	switch (chip_id) {
 	case 0x00 ... 0x03:	/* ADM1021 */
 	case 0x05 ... 0x0f:
-- 
2.35.1


  parent reply	other threads:[~2022-05-25 14:02 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-25 13:57 [PATCH 00/40] hwmon: (lm90) Various improvements to lm90 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 01/40] hwmon: (lm90) Generate sysfs and udev events for all alarms Guenter Roeck
2022-05-25 13:57 ` [PATCH 02/40] hwmon: (lm90) Rework alarm/status handling Guenter Roeck
2022-05-25 13:57 ` [PATCH 03/40] hwmon: (lm90) Reorder include files in alphabetical order Guenter Roeck
2022-05-25 13:57 ` [PATCH 04/40] hwmon: (lm90) Reorder chip enumeration to be " Guenter Roeck
2022-05-25 13:57 ` [PATCH 05/40] hwmon: (lm90) Use BIT macro Guenter Roeck
2022-05-25 13:57 ` [PATCH 06/40] hwmon: (lm90) Move status register bit shifts to compile time Guenter Roeck
2022-05-25 13:57 ` [PATCH 07/40] hwmon: (lm90) Stop using R_/W_ register prefix Guenter Roeck
2022-05-25 13:57 ` [PATCH 08/40] hwmon: (lm90) Improve PEC support Guenter Roeck
2022-05-25 13:57 ` [PATCH 09/40] hwmon: (lm90) Add partial PEC support for ADT7461 Guenter Roeck
2022-05-25 13:57 ` [PATCH 10/40] hwmon: (lm90) Enable full PEC support for ADT7461A Guenter Roeck
2022-05-25 13:57 ` [PATCH 11/40] hwmon: (lm90) Add support for unsigned and signed temperatures Guenter Roeck
2022-05-25 13:57 ` [PATCH 12/40] hwmon: (lm90) Only re-read registers if volatile Guenter Roeck
2022-05-25 13:57 ` [PATCH 13/40] hwmon: (lm90) Support multiple temperature resolutions Guenter Roeck
2022-05-26  7:12   ` Slawomir Stepien
2022-05-26 14:32     ` Guenter Roeck
2022-05-25 13:57 ` [PATCH 14/40] hwmon: (lm90) Use single flag to indicate extended temperature support Guenter Roeck
2022-05-25 13:57 ` [PATCH 15/40] hwmon: (lm90) Rework detect function Guenter Roeck
2022-05-25 13:57 ` [PATCH 16/40] hwmon: (lm90) Add support for additional chip revision of NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 17/40] hwmon: (lm90) Fix/Add detection of G781-1 Guenter Roeck
2022-05-25 13:57 ` [PATCH 18/40] hwmon: (lm90) Add flag to indicate 'alarms' attribute support Guenter Roeck
2022-05-25 13:57 ` [PATCH 19/40] hwmon: (lm90) Add explicit support for MAX6648/MAX6692 Guenter Roeck
2022-05-25 13:57 ` [PATCH 20/40] hwmon: (lm90) Add support for ADT7481, ADT7482, and ADT7483 Guenter Roeck
2022-05-27  5:08   ` Slawomir Stepien
2022-05-25 13:57 ` [PATCH 21/40] hwmon: (lm90) Strengthen chip detection for ADM1032, ADT7461(A), and NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 22/40] hwmon: (lm90) Add support for MAX6690 Guenter Roeck
2022-05-25 13:57 ` [PATCH 23/40] hwmon: (lm90) Add flag to indicate support for minimum temperature limits Guenter Roeck
2022-05-25 13:57 ` [PATCH 24/40] hwmon: (lm90) Add flag to indicate conversion rate support Guenter Roeck
2022-05-25 13:57 ` [PATCH 25/40] hwmon: (lm90) Add support for MAX6642 Guenter Roeck
2022-05-25 13:57 ` [PATCH 26/40] hwmon: (lm90) Let lm90_read16() handle 8-bit read operations Guenter Roeck
2022-05-25 13:57 ` [PATCH 27/40] hwmon: (lm90) Introduce 16-bit register write function Guenter Roeck
2022-05-25 13:57 ` [PATCH 28/40] hwmon: (lm90) Support MAX1617 and LM84 Guenter Roeck
2022-05-25 13:57 ` [PATCH 29/40] hwmon: (lm90) Add support for ADM1021, ADM1021A, and ADM1023 Guenter Roeck
2022-05-25 13:57 ` [PATCH 30/40] hwmon: (lm90) Add remaining chips supported by adm1021 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 31/40] hwmon: (lm90) Combine lm86 and lm90 configuration Guenter Roeck
2022-05-25 13:57 ` [PATCH 32/40] hwmon: (lm90) Add explicit support for NCT210 Guenter Roeck
2022-05-25 13:57 ` [PATCH 33/40] hwmon: (lm90) Add support for ON Semiconductor NCT214 and NCT72 Guenter Roeck
2022-05-25 13:57 ` [PATCH 34/40] hwmon: (lm90) Add support for ON Semiconductor NCT218 Guenter Roeck
2022-05-25 13:57 ` [PATCH 35/40] hwmon: (lm90) Add support for ADT7421 Guenter Roeck
2022-05-25 13:57 ` [PATCH 36/40] hwmon: (lm90) Only disable alerts if not already disabled Guenter Roeck
2022-05-25 13:57 ` [PATCH 37/40] hwmon: (lm90) Add explicit support for ADM1020 Guenter Roeck
2022-05-25 13:57 ` [PATCH 38/40] hwmon: (lm90) Add support and detection of Philips/NXP NE1618 Guenter Roeck
2022-05-25 13:57 ` Guenter Roeck [this message]
2022-05-25 13:57 ` [PATCH 40/40] hwmon: (lm90) Support temp_samples attribute Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220525135758.2944744-40-linux@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sst@poczta.fm \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox