Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: linux-hwmon@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jean Delvare <jdelvare@suse.com>,
	Slawomir Stepien <sst@poczta.fm>,
	Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 06/40] hwmon: (lm90) Move status register bit shifts to compile time
Date: Wed, 25 May 2022 06:57:24 -0700	[thread overview]
Message-ID: <20220525135758.2944744-7-linux@roeck-us.net> (raw)
In-Reply-To: <20220525135758.2944744-1-linux@roeck-us.net>

Handling bit shifts necessary to extract status bits during compile time
reduces code and data size by almost 5% when building for x86_64.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/lm90.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 0f3fadc1631c..cc26dd08fbff 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1345,17 +1345,18 @@ static const u8 lm90_temp_emerg_index[3] = {
 	LOCAL_EMERG, REMOTE_EMERG, REMOTE2_EMERG
 };
 
-static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 };
-static const u8 lm90_max_alarm_bits[3] = { 6, 4, 12 };
-static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 };
-static const u8 lm90_crit_alarm_bits_swapped[3] = { 1, 0, 9 };
-static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 };
-static const u8 lm90_fault_bits[3] = { 0, 2, 10 };
+static const u16 lm90_min_alarm_bits[3] = { BIT(5), BIT(3), BIT(11) };
+static const u16 lm90_max_alarm_bits[3] = { BIT(6), BIT(4), BIT(12) };
+static const u16 lm90_crit_alarm_bits[3] = { BIT(0), BIT(1), BIT(9) };
+static const u16 lm90_crit_alarm_bits_swapped[3] = { BIT(1), BIT(0), BIT(9) };
+static const u16 lm90_emergency_alarm_bits[3] = { BIT(15), BIT(13), BIT(14) };
+static const u16 lm90_fault_bits[3] = { BIT(0), BIT(2), BIT(10) };
 
 static int lm90_temp_read(struct device *dev, u32 attr, int channel, long *val)
 {
 	struct lm90_data *data = dev_get_drvdata(dev);
-	int err, bit;
+	int err;
+	u16 bit;
 
 	mutex_lock(&data->update_lock);
 	err = lm90_update_device(dev);
@@ -1374,22 +1375,22 @@ static int lm90_temp_read(struct device *dev, u32 attr, int channel, long *val)
 	case hwmon_temp_fault:
 		switch (attr) {
 		case hwmon_temp_min_alarm:
-			bit = BIT(lm90_min_alarm_bits[channel]);
+			bit = lm90_min_alarm_bits[channel];
 			break;
 		case hwmon_temp_max_alarm:
-			bit = BIT(lm90_max_alarm_bits[channel]);
+			bit = lm90_max_alarm_bits[channel];
 			break;
 		case hwmon_temp_crit_alarm:
 			if (data->flags & LM90_HAVE_CRIT_ALRM_SWP)
-				bit = BIT(lm90_crit_alarm_bits_swapped[channel]);
+				bit = lm90_crit_alarm_bits_swapped[channel];
 			else
-				bit = BIT(lm90_crit_alarm_bits[channel]);
+				bit = lm90_crit_alarm_bits[channel];
 			break;
 		case hwmon_temp_emergency_alarm:
-			bit = BIT(lm90_emergency_alarm_bits[channel]);
+			bit = lm90_emergency_alarm_bits[channel];
 			break;
 		case hwmon_temp_fault:
-			bit = BIT(lm90_fault_bits[channel]);
+			bit = lm90_fault_bits[channel];
 			break;
 		}
 		*val = !!(data->alarms & bit);
-- 
2.35.1


  parent reply	other threads:[~2022-05-25 13:58 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-25 13:57 [PATCH 00/40] hwmon: (lm90) Various improvements to lm90 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 01/40] hwmon: (lm90) Generate sysfs and udev events for all alarms Guenter Roeck
2022-05-25 13:57 ` [PATCH 02/40] hwmon: (lm90) Rework alarm/status handling Guenter Roeck
2022-05-25 13:57 ` [PATCH 03/40] hwmon: (lm90) Reorder include files in alphabetical order Guenter Roeck
2022-05-25 13:57 ` [PATCH 04/40] hwmon: (lm90) Reorder chip enumeration to be " Guenter Roeck
2022-05-25 13:57 ` [PATCH 05/40] hwmon: (lm90) Use BIT macro Guenter Roeck
2022-05-25 13:57 ` Guenter Roeck [this message]
2022-05-25 13:57 ` [PATCH 07/40] hwmon: (lm90) Stop using R_/W_ register prefix Guenter Roeck
2022-05-25 13:57 ` [PATCH 08/40] hwmon: (lm90) Improve PEC support Guenter Roeck
2022-05-25 13:57 ` [PATCH 09/40] hwmon: (lm90) Add partial PEC support for ADT7461 Guenter Roeck
2022-05-25 13:57 ` [PATCH 10/40] hwmon: (lm90) Enable full PEC support for ADT7461A Guenter Roeck
2022-05-25 13:57 ` [PATCH 11/40] hwmon: (lm90) Add support for unsigned and signed temperatures Guenter Roeck
2022-05-25 13:57 ` [PATCH 12/40] hwmon: (lm90) Only re-read registers if volatile Guenter Roeck
2022-05-25 13:57 ` [PATCH 13/40] hwmon: (lm90) Support multiple temperature resolutions Guenter Roeck
2022-05-26  7:12   ` Slawomir Stepien
2022-05-26 14:32     ` Guenter Roeck
2022-05-25 13:57 ` [PATCH 14/40] hwmon: (lm90) Use single flag to indicate extended temperature support Guenter Roeck
2022-05-25 13:57 ` [PATCH 15/40] hwmon: (lm90) Rework detect function Guenter Roeck
2022-05-25 13:57 ` [PATCH 16/40] hwmon: (lm90) Add support for additional chip revision of NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 17/40] hwmon: (lm90) Fix/Add detection of G781-1 Guenter Roeck
2022-05-25 13:57 ` [PATCH 18/40] hwmon: (lm90) Add flag to indicate 'alarms' attribute support Guenter Roeck
2022-05-25 13:57 ` [PATCH 19/40] hwmon: (lm90) Add explicit support for MAX6648/MAX6692 Guenter Roeck
2022-05-25 13:57 ` [PATCH 20/40] hwmon: (lm90) Add support for ADT7481, ADT7482, and ADT7483 Guenter Roeck
2022-05-27  5:08   ` Slawomir Stepien
2022-05-25 13:57 ` [PATCH 21/40] hwmon: (lm90) Strengthen chip detection for ADM1032, ADT7461(A), and NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 22/40] hwmon: (lm90) Add support for MAX6690 Guenter Roeck
2022-05-25 13:57 ` [PATCH 23/40] hwmon: (lm90) Add flag to indicate support for minimum temperature limits Guenter Roeck
2022-05-25 13:57 ` [PATCH 24/40] hwmon: (lm90) Add flag to indicate conversion rate support Guenter Roeck
2022-05-25 13:57 ` [PATCH 25/40] hwmon: (lm90) Add support for MAX6642 Guenter Roeck
2022-05-25 13:57 ` [PATCH 26/40] hwmon: (lm90) Let lm90_read16() handle 8-bit read operations Guenter Roeck
2022-05-25 13:57 ` [PATCH 27/40] hwmon: (lm90) Introduce 16-bit register write function Guenter Roeck
2022-05-25 13:57 ` [PATCH 28/40] hwmon: (lm90) Support MAX1617 and LM84 Guenter Roeck
2022-05-25 13:57 ` [PATCH 29/40] hwmon: (lm90) Add support for ADM1021, ADM1021A, and ADM1023 Guenter Roeck
2022-05-25 13:57 ` [PATCH 30/40] hwmon: (lm90) Add remaining chips supported by adm1021 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 31/40] hwmon: (lm90) Combine lm86 and lm90 configuration Guenter Roeck
2022-05-25 13:57 ` [PATCH 32/40] hwmon: (lm90) Add explicit support for NCT210 Guenter Roeck
2022-05-25 13:57 ` [PATCH 33/40] hwmon: (lm90) Add support for ON Semiconductor NCT214 and NCT72 Guenter Roeck
2022-05-25 13:57 ` [PATCH 34/40] hwmon: (lm90) Add support for ON Semiconductor NCT218 Guenter Roeck
2022-05-25 13:57 ` [PATCH 35/40] hwmon: (lm90) Add support for ADT7421 Guenter Roeck
2022-05-25 13:57 ` [PATCH 36/40] hwmon: (lm90) Only disable alerts if not already disabled Guenter Roeck
2022-05-25 13:57 ` [PATCH 37/40] hwmon: (lm90) Add explicit support for ADM1020 Guenter Roeck
2022-05-25 13:57 ` [PATCH 38/40] hwmon: (lm90) Add support and detection of Philips/NXP NE1618 Guenter Roeck
2022-05-25 13:57 ` [PATCH 39/40] hwmon: (lm90) Add table with supported Analog/ONSEMI devices Guenter Roeck
2022-05-25 13:57 ` [PATCH 40/40] hwmon: (lm90) Support temp_samples attribute Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220525135758.2944744-7-linux@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sst@poczta.fm \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox