From: Akshay Gupta <Akshay.Gupta@amd.com>
To: <linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>
Cc: <linux@roeck-us.net>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <corbet@lwn.net>,
<skhan@linuxfoundation.org>, <rdunlap@infradead.org>,
<arnd@arndb.de>, <gregkh@linuxfoundation.org>,
<naveenkrishna.chatradhi@amd.com>, <Anand.Umarji@amd.com>,
Prathima Lk <Prathima.Lk@amd.com>,
Akshay Gupta <Akshay.Gupta@amd.com>
Subject: [PATCH v1 2/4] dt-bindings: hwmon: add DIMM thermal sensor properties
Date: Mon, 16 Nov 2026 17:32:26 +0530 [thread overview]
Message-ID: <20261116120228.865196-3-Akshay.Gupta@amd.com> (raw)
In-Reply-To: <20261116120228.865196-1-Akshay.Gupta@amd.com>
From: Prathima Lk <Prathima.Lk@amd.com>
The SB-RMI mailbox also reports the temperature of the TS0/TS1 thermal
sensors on each DIMM (command 0x48, Mode 1 DIMM_ADDRESS). Boards differ
in how many DIMMs are fitted per memory channel and which sensors are
populated, so describe both in the binding.
Add two optional properties:
- amd,dpc: uint8, DIMMs per channel, 1 or 2 (default 1).
- amd,dimm-ids: uint8 array of 1 to 32 unique Mode 1 DIMM_ADDRESS
values, one per sensor to report. Encoding: bit[7]=1 (Mode 1),
bit[6] sensor (0=TS0, 1=TS1), bit[5] reserved, bit[4] DIMM slot,
bit[3:0] memory channel. When absent, the TS0 and TS1 sensors of
all 16 DIMMs are reported.
The allowed amd,dimm-ids values depend on amd,dpc: with one DIMM per
channel 0x80-0x8f and 0xc0-0xcf; with two, 0x80-0x87, 0x90-0x97,
0xc0-0xc7 and 0xd0-0xd7. This rejects the reserved bit, a slot bit
without a second DIMM, and channels above 7 with two DIMMs per channel.
Also mention the DIMM sensors in the title and description and extend
the example.
Signed-off-by: Prathima Lk <Prathima.Lk@amd.com>
Signed-off-by: Akshay Gupta <Akshay.Gupta@amd.com>
---
.../devicetree/bindings/hwmon/amd,sbrmi.yaml | 59 +++++++++++++++++--
1 file changed, 55 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
index 353d81d89bf5..f08b62133996 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -4,9 +4,7 @@
$id: http://devicetree.org/schemas/hwmon/amd,sbrmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: >
- Sideband Remote Management Interface (SB-RMI) compliant
- AMD SoC power device.
+title: AMD SoC SB-RMI power and DIMM thermal sensor
maintainers:
- Akshay Gupta <Akshay.Gupta@amd.com>
@@ -16,7 +14,8 @@ description: |
interface that reports AMD SoC's Power (normalized Power) using,
Mailbox Service Request and resembles a typical 8-pin remote power
sensor's I2C interface to BMC. The power attributes in hwmon
- reports power in microwatts.
+ reports power in microwatts. The same mailbox also reports the
+ temperature of the TS0/TS1 thermal sensors on each populated DIMM.
properties:
compatible:
@@ -33,10 +32,60 @@ properties:
\[open source SoC register reference\]
https://www.amd.com/en/support/tech-docs?keyword=55898
+ amd,dpc:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [1, 2]
+ default: 1
+ description:
+ DIMMs per channel (dimms-per-channel), the number of DIMM slots per
+ memory channel.
+
+ amd,dimm-ids:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 32
+ uniqueItems: true
+ description: |
+ Mode 1 SB-RMI DIMM_ADDRESS of each DIMM thermal sensor to report.
+ Encoding: bit[7]=1 (Mode 1), bit[6] sensor (0=TS0, 1=TS1), bit[5]
+ reserved, bit[4] DIMM slot, bit[3:0] memory channel ID. With one DIMM
+ per channel bit[4] is 0; with two, the memory channel ID is 0-7.
+ When absent, the TS0 and TS1 sensors of all 16 DIMMs are reported.
+
required:
- compatible
- reg
+allOf:
+ - if:
+ required:
+ - amd,dpc
+ properties:
+ amd,dpc:
+ const: 2
+ then:
+ properties:
+ amd,dimm-ids:
+ items:
+ anyOf:
+ - minimum: 0x80
+ maximum: 0x87
+ - minimum: 0x90
+ maximum: 0x97
+ - minimum: 0xc0
+ maximum: 0xc7
+ - minimum: 0xd0
+ maximum: 0xd7
+ else:
+ properties:
+ amd,dimm-ids:
+ items:
+ anyOf:
+ - minimum: 0x80
+ maximum: 0x8f
+ - minimum: 0xc0
+ maximum: 0xcf
+
additionalProperties: false
examples:
@@ -48,6 +97,8 @@ examples:
sbrmi@3c {
compatible = "amd,sbrmi";
reg = <0x3c>;
+ /* TS0 sensors of the DIMMs on memory channels 0-7 */
+ amd,dimm-ids = /bits/ 8 <0x80 0x81 0x82 0x83 0x84 0x85 0x86 0x87>;
};
};
...
--
2.34.1
next prev parent reply other threads:[~2026-11-16 12:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 12:02 [PATCH v1 0/4] misc: amd-sbi: add DIMM thermal sensors to sbrmi Akshay Gupta
2026-11-16 12:02 ` [PATCH v1 1/4] misc: amd-sbi: use guard() for data->lock mutex Akshay Gupta
2026-11-16 12:15 ` sashiko-bot
2026-11-16 12:02 ` Akshay Gupta [this message]
2026-11-16 12:11 ` [PATCH v1 2/4] dt-bindings: hwmon: add DIMM thermal sensor properties sashiko-bot
2026-11-16 12:02 ` [PATCH v1 3/4] misc: amd-sbi: add DIMM thermal sensor support Akshay Gupta
2026-11-16 12:13 ` sashiko-bot
2026-11-16 12:02 ` [PATCH v1 4/4] Documentation: hwmon: document DIMM thermal sensor channels Akshay Gupta
2026-11-16 12:08 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116120228.865196-3-Akshay.Gupta@amd.com \
--to=akshay.gupta@amd.com \
--cc=Anand.Umarji@amd.com \
--cc=Prathima.Lk@amd.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=naveenkrishna.chatradhi@amd.com \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox