Re: [PATCH 3/3] arm64: dts: qcom: talos-evk-camera: Add DT overlay

[Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>]

On 12/22/25 13:41, Wenmeng Liu wrote:
> 
> 
> On 12/22/2025 7:19 PM, Vladimir Zapolskiy wrote:
>> On 12/22/25 10:44, Wenmeng Liu wrote:
>>> Enable IMX577 via CCI on Taloss EVK Core Kit.
>>>
>>> The Talos EVK board does not include a camera sensor
>>> by default, this overlay reflects the possibility of
>>> attaching an optional camera sensor.
>>> For this reason, the camera sensor configuration is
>>> placed in talos-evk-camera.dtso, rather than
>>> modifying the base talos-evk.dts.
>>>
>>> Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
>>> ---
>>>    arch/arm64/boot/dts/qcom/Makefile              |  2 +
>>>    arch/arm64/boot/dts/qcom/talos-evk-camera.dtso | 64 ++++++++++++++++
>>> ++++++++++
>>>    arch/arm64/boot/dts/qcom/talos.dtsi            | 21 +++++++++
>>
>> Please split QCS615 MCLK definitions change into a separate commit.
> ACK.>
>>>    3 files changed, 87 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/
>>> qcom/Makefile
>>> index
>>> 60121f133078b2754f98e6f45a3db4031b478cc8..b1d85b1f4a94714f2a5c976d162482d70ae920f2 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -325,7 +325,9 @@ dtb-$(CONFIG_ARCH_QCOM)    += sm8650-qrd.dtb
>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm8750-mtp.dtb
>>>    dtb-$(CONFIG_ARCH_QCOM)    += sm8750-qrd.dtb
>>>    dtb-$(CONFIG_ARCH_QCOM)    += talos-evk.dtb
>>> +talos-evk-camera-dtbs        := talos-evk.dtb talos-evk-camera.dtbo
>>>    talos-evk-lvds-auo,g133han01-dtbs    := talos-evk.dtb talos-evk-
>>> lvds-auo,g133han01.dtbo
>>> +dtb-$(CONFIG_ARCH_QCOM)    += talos-evk-camera.dtb
>>>    dtb-$(CONFIG_ARCH_QCOM)    += talos-evk-lvds-auo,g133han01.dtb
>>>    x1e001de-devkit-el2-dtbs    := x1e001de-devkit.dtb x1-el2.dtbo
>>>    dtb-$(CONFIG_ARCH_QCOM)    += x1e001de-devkit.dtb x1e001de-devkit-
>>> el2.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/talos-evk-camera.dtso b/arch/
>>> arm64/boot/dts/qcom/talos-evk-camera.dtso
>>> new file mode 100644
>>> index
>>> 0000000000000000000000000000000000000000..ae1a02295b4dc48212aad40980a329ff458fe69a
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/talos-evk-camera.dtso
>>> @@ -0,0 +1,64 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>>
>> Please add a missing year of the change.
> Now our requirement is a yearless copyright.>

Ack. It's a lawyers' domain anyway.

>>> + */
>>> +
>>> +/dts-v1/;
>>> +/plugin/;
>>> +
>>> +#include <dt-bindings/clock/qcom,qcs615-camcc.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +
>>> +&camss {
>>> +    vdd-csiphy-1p2-supply = <&vreg_l11a>;
>>> +    vdd-csiphy-1p8-supply = <&vreg_l12a>;
>>> +
>>> +    status = "okay";
>>> +
>>> +    ports {
>>> +        #address-cells = <1>;
>>> +        #size-cells = <0>;
>>> +
>>> +        port@1 {
>>> +            reg = <1>;
>>> +
>>> +            csiphy1_ep: endpoint {
>>> +                clock-lanes = <7>;
>>
>> Please remove 'clock-lanes' property.
> ACK.>
>>> +                data-lanes = <0 1 2 3>;
>>> +                remote-endpoint = <&imx577_ep1>;
>>> +            };
>>> +        };
>>> +    };
>>> +};
>>> +
>>> +&cci {
>>> +    status = "okay";
>>> +};
>>> +
>>> +&cci_i2c1 {
>>> +    #address-cells = <1>;
>>> +    #size-cells = <0>;
>>> +
>>> +    camera@1a {
>>> +        compatible = "sony,imx577";
>>> +        reg = <0x1a>;
>>> +
>>> +        reset-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
>>> +        pinctrl-0 = <&cam2_default>;
>>> +        pinctrl-names = "default";
>>> +
>>> +        clocks = <&camcc CAM_CC_MCLK2_CLK>;
>>> +        assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
>>> +        assigned-clock-rates = <24000000>;
>>> +
>>> +        avdd-supply = <&vreg_s4a>;
>>
>> Just one voltage supply?
> yes, 22pin camera module only have one pin for power.>

It's common that mezzanine boards are supplied with power from S4A or VBAT,
I've never seen a camera module supplied with just one voltage regulator,
that's why it attracts attention.

What is a camera module here, is it on an attachable vision mezzanine like
on RBx series or a part of Talos EVK PCB like on QRD series?

If it is a mezzanine, the support of mezzanine boards should be done as
a DT overlay.

-- 
Best wishes,
Vladimir