[PATCH 2/3] arm64: dts: qcom: talos: Add CCI definitions

[Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>]

Qualcomm Talos SoC contains 1 Camera Control Interface controllers.

Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/talos.dtsi | 76 +++++++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
index 2e2fa9dc11aed6e8413488302710bc219ca9b64d..ebb1807f0222c075d4207163ed4359a55616d903 100644
--- a/arch/arm64/boot/dts/qcom/talos.dtsi
+++ b/arch/arm64/boot/dts/qcom/talos.dtsi
@@ -1550,6 +1550,46 @@ tlmm: pinctrl@3100000 {
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			cci_default: cci0-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					/* SDA, SCL */
+					pins = "gpio32", "gpio33";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					/* SDA, SCL */
+					pins = "gpio34", "gpio35";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-state {
+					/* SDA, SCL */
+					pins = "gpio32", "gpio33";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-state {
+					/* SDA, SCL */
+					pins = "gpio34", "gpio35";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>;
+				};
+			};
+
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				pins = "gpio4", "gpio5";
 				function = "qup0";
@@ -3786,6 +3826,42 @@ videocc: clock-controller@ab00000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci: cci@ac4a000 {
+			compatible = "qcom,sm6150-cci", "qcom,msm8996-cci";
+
+			reg = <0x0 0x0ac4a000  0x0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_CLK>;
+			clock-names = "soc_ahb",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camss: isp@acb3000 {
 			compatible = "qcom,sm6150-camss";
 

-- 
2.34.1