Latest 2.4 IA64 Baseline (Bjorn) testing report

Latest 2.4 IA64 Baseline (Bjorn) testing report

[Yu, Luming]

[-- Attachment #1: Type: text/plain, Size: 2809 bytes --]

ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 11/26 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 11/26 (Shanghai time)
		failed
	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533  to solve  kernel unaligned access when pressing power button

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk			tested ok
2. serial console			didn't test
3. PS/2 keyboard			tested ok
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp)		tested ok
8. IDE (eg. r/w floppy or CDROM)	didn't test
9. SCI (eg. Press power button)		tested ok
10. Soft Power off				tested ok

           CPU0       CPU1       CPU2       CPU3       
 32:        515          2          0          1   IO-SAPIC-edge  keyboard
 33:          2          0          0          0   IO-SAPIC-edge  ide1
 34:          4          0          0         33   IO-SAPIC-edge  ide0
 36:         20          0          0          0   IO-SAPIC-edge  PS/2 Mouse
 39:          5          0          0          0  IO-SAPIC-level  acpi
 45:         17          0          0          0   IO-SAPIC-edge  serial
 48:         43          0          0          0  IO-SAPIC-level  usb-uhci
 49:        193          0          0          4  IO-SAPIC-level  eth0
 51:       3631         10          3        169  IO-SAPIC-level  qla1280
239:     181356     180392     180014     161679          LSAPIC  timer
254:      12686      13140      12899      12983          LSAPIC  IPI
NMI:          0          0          0          0 
ERR:          0

Problems:

1. Failed to bk pull  http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22  , Error message was

	" Entire  repository is locked by:
		RESYNC directory.
	ERROR-Unable to lock repository for update"

2.PCI: no interrupt route for 00:00:03 pin B. 
 <<lion.dsl.ZIP>> 
3. alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed   (Known issue)

4. hda:end_request: I/O error, dev 03:00 (hda), sector 0
end_request: I/O error, dev 03:00 (hda), sector 1
end_request: I/O error, dev 03:00 (hda), sector 2


 <<dmesg.24.TXT>>  <<2.4.config.TXT>>  <<lspci.24.TXT>> 
Thanks
Luming


[-- Attachment #2: lion.dsl.ZIP --]
[-- Type: application/x-zip-compressed, Size: 9758 bytes --]

[-- Attachment #3: dmesg.24.TXT --]
[-- Type: text/plain, Size: 0 bytes --]



[-- Attachment #4: 2.4.config.TXT --]
[-- Type: text/plain, Size: 0 bytes --]



[-- Attachment #5: lspci.24.TXT --]
[-- Type: text/plain, Size: 0 bytes --]

Re: Latest 2.4 IA64 Baseline (Bjorn) testing report

[Matthew Wilcox]

On Wed, Nov 26, 2003 at 11:12:04PM +0800, Yu, Luming wrote:
> 1. Failed to bk pull  http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22  , Error message was
> 
> 	" Entire  repository is locked by:
> 		RESYNC directory.
> 	ERROR-Unable to lock repository for update"

This problem's at your end; you need to do some BK magic to fix it.
I don't use BK myself, but I'm sure somebody else can tell you how to
fix it.

-- 
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk

Re: Latest 2.4 IA64 Baseline (Bjorn) testing report

[Bjorn Helgaas]

On Wednesday 26 November 2003 8:14 am, Matthew Wilcox wrote:
> On Wed, Nov 26, 2003 at 11:12:04PM +0800, Yu, Luming wrote:
> > 1. Failed to bk pull  http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22  , Error message was
> > 
> > 	" Entire  repository is locked by:
> > 		RESYNC directory.
> > 	ERROR-Unable to lock repository for update"
> 
> This problem's at your end; you need to do some BK magic to fix it.
> I don't use BK myself, but I'm sure somebody else can tell you how to
> fix it.

I think this means a previous "bk pull" is incomplete because it found
changes that need to be merged manually.  You should be able to use
"bk resolve" to finish that merge, then retry the new "bk pull".

Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion)

[Yu, Luming]

[-- Attachment #1: Type: text/plain, Size: 3418 bytes --]

ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/3 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/3 (Shanghai time)
	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533  to solve  kernel unaligned access when pressing power button

	Resolved 1 conflict by hand.(Take change from linux-ia64-2.4)

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk			tested ok
2. serial console			tested ok
3. PS/2 keyboard			tested ok
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp)		tested ok
8. IDE (eg. r/w floppy or CDROM)	tested ok
9. SCI (eg. Press power button)		tested ok
10. Soft Power off				tested ok

           CPU0       CPU1       CPU2       CPU3
 32:        666         24          2          6   IO-SAPIC-edge  keyboard
 33:        390          7          3          1   IO-SAPIC-edge  ide1
 34:         22         11          1          4   IO-SAPIC-edge  ide0
 36:        434          0          0          0   IO-SAPIC-edge  PS/2 Mouse
 39:          5          0          0          0  IO-SAPIC-level  acpi
 44:        136          3          0          0   IO-SAPIC-edge  serial
 45:         15          2          0          0   IO-SAPIC-edge  serial
 48:         27          0          0          0  IO-SAPIC-level  usb-uhci
 49:       1027         24          2          2  IO-SAPIC-level  eth0
 51:       5780        224         23         75  IO-SAPIC-level  qla1280
239:     475473     474608     474212     464881          LSAPIC  timer
254:      16742      17274      16081      16602          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0

Problems:
1. USB cannot work

USB mose doesn't work like previous report.

2.PCI: no interrupt route for 00:00:03 pin B. 

There is only 1 PRT entry below for bus 0, slot 3, pin D in DSDT.and the error message reflect that fact.  This error is for device 00:03.3 SMBus.
I don't know how to test that device. Actually 2.6 will call acpi_pci_irq_derive try to derive IRQ from a parent bridge's, But 2.4 will not do that.
Maybe this is a issue. But it will not help this case.

                Package (0x04)
                {
                    0x0003FFFF, 
                    0x03, 
                    0x00, 
                    0x32
                }, 

3.  alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed   (Known issue)
Don't know how to fix

4. I don't have floppy in floppy driver, but below message is quite boring.
ide-floppy: hda: I/O error, pc =  0, key =  2, asc = 3a, ascq =  0
ide-floppy: hda: I/O error, pc = 1b, key =  2, asc = 3a, ascq =  0
hda: No disk in drive

 <<dmesg.24.ZIP>>  <<lion.2.4.config.ZIP>>  <<lspci.24.ZIP>> 
Thanks,
Luming

[-- Attachment #2: dmesg.24.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5771 bytes --]

[-- Attachment #3: lion.2.4.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5800 bytes --]

[-- Attachment #4: lspci.24.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1193 bytes --]

Latest 2.4 IA64 Baseline (Bjorn) testing report (Tiger)

[Yu, Luming]

[-- Attachment #1: Type: text/plain, Size: 2238 bytes --]

ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	MPT scsi host driver
	Seagate ST318406LC boot drive
	IDE floppy and CDROM
	Serial console
	USB mouse
	Ethernet Pro 1000

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/3 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/3 (Shanghai time)

	Resolved 1 conflict by hand.(Take change from linux-ia64-2.4)

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk			tested ok
2. serial console			tested ok
3. USB 	keyboard			tested ok
4. ATI (run X window system)		tested ok
5. USB mouse				tested ok
6. NIC (eg. Ping or ftp)		tested ok
7. IDE (eg. r/w floppy or CDROM)	tested ok
8. SCI (eg. Press power button)		tested ok
9. Soft Power off			tested ok

           CPU0       CPU1       CPU2       CPU3
 32:          0          0          5          0   IO-SAPIC-edge  keyboard
 34:          0          0         71          1   IO-SAPIC-edge  ide0
 39:          0          0          4          0  IO-SAPIC-level  acpi
 45:          0          0       1899          0   IO-SAPIC-edge  serial
 48:          0          1         46          0  IO-SAPIC-level  usb-uhci
 49:          7         28       1450          2  IO-SAPIC-level  usb-uhci
 50:          0          0          0          0  IO-SAPIC-level  ehci_hcd
 51:          0          4        847          0  IO-SAPIC-level  eth0
 53:          5         27       4444          0  IO-SAPIC-level  ioc0
 54:          0          0         42          0  IO-SAPIC-level  ioc1
239:     308674     307900     307548     307036          LSAPIC  timer
254:      14455      14127      14779      13957          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0

Problems:

Please refer Dmesg attached.

[Dmesg, /proc/interrupts, lspci -v , .config are attached below]

 <<2.4.ZIP>> 
Thanks,
Luming

[-- Attachment #2: 2.4.ZIP --]
[-- Type: application/x-zip-compressed, Size: 11478 bytes --]

RE: Latest 2.4 IA64 Baseline (Bjorn) testing report

[Yu, Luming]

Yes, I have done that. And it works now. 

Thanks
Luming 

-----Original Message-----
From: Bjorn Helgaas [mailto:bjorn.helgaas@hp.com]
Sent: 2003?12?2? 1:42
To: Matthew Wilcox; Yu, Luming
Cc: linux-acpi; linux-ia64@vger.kernel.org
Subject: Re: Latest 2.4 IA64 Baseline (Bjorn) testing report


On Wednesday 26 November 2003 8:14 am, Matthew Wilcox wrote:
> On Wed, Nov 26, 2003 at 11:12:04PM +0800, Yu, Luming wrote:
> > 1. Failed to bk pull  http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22  , Error message was
> > 
> > 	" Entire  repository is locked by:
> > 		RESYNC directory.
> > 	ERROR-Unable to lock repository for update"
> 
> This problem's at your end; you need to do some BK magic to fix it.
> I don't use BK myself, but I'm sure somebody else can tell you how to
> fix it.

I think this means a previous "bk pull" is incomplete because it found
changes that need to be merged manually.  You should be able to use
"bk resolve" to finish that merge, then retry the new "bk pull".

Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion)

[Yu, Luming]

ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
============Hardware Configuration:
-----------------------
System Name: ACPI-LION
System Type: 4 way 800M Itanium, Lion
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	QLogic QLA12160, Seagate ST39205LC boot drive
	IDE floppy and CDROM
	Serial console
	PS/2 keyboard and mouse
	USB mouse
	Ethernet Pro 100

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time)
	3. patch from http://bugzilla.kernel.org/show_bug.cgi?id\x1533  to solve  kernel unaligned access when pressing power button

	Auto-merged without any manual work.

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk			tested ok
2. serial console				tested ok
3. PS/2 keyboard			tested ok
4. ATI (run X window system)		tested ok
5. PS/2 mouse				tested ok
6. USB mouse				Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
7. NIC (eg. Ping or ftp)			tested ok
8. IDE (eg. r/w floppy or CDROM)	tested ok
9. SCI (eg. Press power button)		tested ok
10. Soft Power off			tested ok

           CPU0       CPU1       CPU2       CPU3       
 32:        493          8          0          4   IO-SAPIC-edge  keyboard
 33:        415         16          0          1   IO-SAPIC-edge  ide1
 34:         34          2          0          2   IO-SAPIC-edge  ide0
 36:       1226        415         29         51   IO-SAPIC-edge  PS/2 Mouse
 39:          9          0          0          0  IO-SAPIC-level  acpi
 45:         17          0          0          0   IO-SAPIC-edge  serial
 48:         27          0          0          0  IO-SAPIC-level  usb-uhci
 49:       3637        244          3          4  IO-SAPIC-level  eth0
 51:       6356        338         18         52  IO-SAPIC-level  qla1280
239:    3321412    3311351    3320288    3319986          LSAPIC  timer
254:      17988      19901      19438      19488          LSAPIC  IPI
NMI:          0          0          0          0 
ERR:          0

Problems:
1. USB mouse cannot work
USB mose doesn't work like previous report.

2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)

RE: Latest 2.4 IA64 Baseline (Bjorn) testing report (Lion)

[Yu, Luming]

[-- Attachment #1: Type: text/plain, Size: 2559 bytes --]

	ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
	=========================
	Hardware Configuration:
	-----------------------
	System Name: ACPI-LION
	System Type: 4 way 800M Itanium, Lion
	M/B revision: N/A
	Processor version: N/A
	Firmware Versions: N/A
	I/O configuration summary:
		QLogic QLA12160, Seagate ST39205LC boot drive
		IDE floppy and CDROM
		Serial console
		PS/2 keyboard and mouse
		USB mouse
		Ethernet Pro 100

	Software Configuration:
	-----------------------
		1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time)
		2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time)
		3. patch from http://bugzilla.kernel.org/show_bug.cgi?id=1533  to solve  kernel unaligned access when pressing power button

		Auto-merged without any manual work.

	ACPI Features Tested: (prioritized).
	--------------------
	1. Boot off SCSI disk			tested ok
	2. serial console				tested ok
	3. PS/2 keyboard			tested ok
	4. ATI (run X window system)		tested ok
	5. PS/2 mouse				tested ok
	6. USB mouse				Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed)
	7. NIC (eg. Ping or ftp)			tested ok
	8. IDE (eg. r/w floppy or CDROM)	tested ok
	9. SCI (eg. Press power button)		tested ok
	10. Soft Power off			tested ok

	           CPU0       CPU1       CPU2       CPU3       
	 32:        493          8          0          4   IO-SAPIC-edge  keyboard
	 33:        415         16          0          1   IO-SAPIC-edge  ide1
	 34:         34          2          0          2   IO-SAPIC-edge  ide0
	 36:       1226        415         29         51   IO-SAPIC-edge  PS/2 Mouse
	 39:          9          0          0          0  IO-SAPIC-level  acpi
	 45:         17          0          0          0   IO-SAPIC-edge  serial
	 48:         27          0          0          0  IO-SAPIC-level  usb-uhci
	 49:       3637        244          3          4  IO-SAPIC-level  eth0
	 51:       6356        338         18         52  IO-SAPIC-level  qla1280
	239:    3321412    3311351    3320288    3319986          LSAPIC  timer
	254:      17988      19901      19438      19488          LSAPIC  IPI
	NMI:          0          0          0          0 
	ERR:          0

	Problems:
	1. USB mouse cannot work
	USB mose doesn't work like previous report.

          2.PCI: no interrupt route for 00:00:03 pin B. (Known issue)
	
	3.  alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed   (Known issue)
	Don't know how to fix
         
	

[-- Attachment #2: lspci.24.ZIP --]
[-- Type: application/x-zip-compressed, Size: 1193 bytes --]

[-- Attachment #3: dmesg.24.ZIP --]
[-- Type: application/x-zip-compressed, Size: 5677 bytes --]

[-- Attachment #4: 2.4.config.ZIP --]
[-- Type: application/x-zip-compressed, Size: 4922 bytes --]

Latest 2.4 IA64 Baseline (Bjorn) testing report (Tiger)

[Yu, Luming]

[-- Attachment #1: Type: text/plain, Size: 2147 bytes --]

ACPI Test Report  for 2.4 ia64 kernel + latest ACPI
=========================
Hardware Configuration:
-----------------------
System Name: ACPI-Tiger
System Type: 4 way 900 Itanium2, tiger
M/B revision: N/A
Processor version: N/A
Firmware Versions: N/A
I/O configuration summary:
	MPT scsi host driver
	Seagate ST318406LC boot drive
	IDE floppy and CDROM
	Serial console
	USB mouse
	Ethernet Pro 1000

Software Configuration:
-----------------------
	1.Bk pull form http://lia64.bkbits.net/linux-ia64-2.4 on 12/10 (Shanghai time)
	2.Bk pull from http://linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 12/10 (Shanghai time)
		Nothing to pull

ACPI Features Tested: (prioritized).
--------------------
1. Boot off SCSI disk			tested ok
2. serial console				tested ok
3. USB 	keyboard			tested ok
4. ATI (run X window system)		tested ok
5. USB mouse				tested ok
6. NIC (eg. Ping or ftp)			tested ok
7. IDE (eg. r/w floppy or CDROM)	tested ok
8. SCI (eg. Press power button)		tested ok
9. Soft Power off				tested ok

           CPU0       CPU1       CPU2       CPU3
 32:          0          0          5          0   IO-SAPIC-edge  keyboard
 34:          0          0         71          1   IO-SAPIC-edge  ide0
 39:          0          0          4          0  IO-SAPIC-level  acpi
 45:          0          0       1899          0   IO-SAPIC-edge  serial
 48:          0          1         46          0  IO-SAPIC-level  usb-uhci
 49:          7         28       1450          2  IO-SAPIC-level  usb-uhci
 50:          0          0          0          0  IO-SAPIC-level  ehci_hcd
 51:          0          4        847          0  IO-SAPIC-level  eth0
 53:          5         27       4444          0  IO-SAPIC-level  ioc0
 54:          0          0         42          0  IO-SAPIC-level  ioc1
239:     308674     307900     307548     307036          LSAPIC  timer
254:      14455      14127      14779      13957          LSAPIC  IPI
NMI:          0          0          0          0
ERR:          0


[Dmesg, /proc/interrupts, lspci -v , .config are attached in 2.4.log below]
 <<2.4.ZIP>> 


[-- Attachment #2: 2.4.ZIP --]
[-- Type: application/x-zip-compressed, Size: 12547 bytes --]