[PATCH V10 0/9] Add Invensense ICM42607

[PATCH V10 0/9] Add Invensense ICM42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add support for the ICM42607 IMU. This sensor shares the same
functionality but a different register layout with the existing
ICM42600.

This driver should work with the ICM42607 and ICM42607P over both I2C
and SPI, however only the ICM42607P over I2C could be tested.

Changes Since V1:
 - Instead of creating a new driver, merged with the existing inv_icm42600
   driver. This necessitated adding some code to the existing driver to
   permit using a different register layout for the same functionality.
 - Split changes up a bit more to decrease the size of the individual
   patches. Note that patch 0004 is still pretty hefty; if I need to split
   further I may need to create some temporary stub functions.
 - Used guard() and PM_RUNTIME_ACQUIRE_AUTOSUSPEND() on the new functions
   per Jonathan's recommendations.

Changes Since V2:
 - Went back to using a new driver on advice from Invensense engineer.
 - Further split changes up into smaller chunks of functionality. Note
   still that the largest patch is approximately 900 lines, and that while
   the driver compiles cleanly at each commit it is not able to drive the
   hardware until the commit that adds the Interrupt (as it also adds the
   Makefile).
 - Change the error to a warning when the devicetree binding does not match
   the hardware ID.
 - Dropped the ack on the devicetree bindings, as I am creating a new file
   (for a new driver) instead of modifying the existing one.

Changes Since V3:
 - Numerous small fixes (too many to list here). Thank you to everyone who
   provided feedback.
 - Split power management additions into an additional commit to break
   things up further.
 - Consolidated devicetree documentation in existing
   invensense,icm42600.yaml file.
 - Removed most of the FIELD_PREP from header file to c files to make code
   easier to read.
 - Changed scale values to 2D arrays for Gyro and Accelerometer.
 - Removed IIO_CHAN_INFO_CALIBBIAS attribute.

Changes Since V4:
 - Additional numerous small fixes, thank you again for all the feedback.
 - Dropped power control API and instead run device in low noise mode.
 - Split devicetree bindings into two distinct changes.
 - Reordered adding of enums and structs to main header file so that they
   are only brought in when needed.
 - Stopped using enum for driver data and instead am using pointer to
   device specific driver data.

Changes Since V5:
 - Corrected use of "dev_warn_probe" to just "dev_warn".
 - Fixed some return scenarios which would unconditionally return 0
   when an error was present.
 - Corrected use of max() to min() for bounds checking. max() was
   incorrect.
 - Fixed using "st->conf.accel.odr" in the gyroscope function. It
   should have been "st->conf.gyro.odr" which it now is.
 - Additional small fixes suggested by "sashiko.dev".
 - Added a regmap cache. I used the datasheet to try and determine
   which registers might change without explicit writes.

Changes Since V6:
 - Corrected additional errors identified by sashiko.dev, mostly
   fixing potential deadlocks, missing calls for pm runtime, and
   potential overflow issues.

Changes Since V7:
 - Dropped Wake on Movement patches, since some of the functionality
   was only available for a device on which I cannot test.
 - Dropped support for SPI 3-Wire mode, since it complicated the
   bus setup (and I lack the hardware to test such features anyway).
 - Fixed a few additional bugs identified by sashiko.dev bot.

Changes Since V8:
 - Added back IRQ dropped accidentally when dropping wake on movement
   patches.
 - Dropped "Reviewed-By" tag on patch 2 because of substantial changes
   made to devicetree binding documentation.
 - Additional small fixes as suggested.

Changes Since V9:
 - Removed interrupts (and buffers) from the driver. I previously was
   unable to detect deadlocks because it turns out my IRQ was not even
   wired correctly in my device.
 - Updated devicetree binding commits to make interrupts optional for
   users of the icm42607 driver.

Chris Morgan (9):
  dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600
  dt-bindings: iio: imu: icm42600: Add icm42607 binding
  iio: imu: inv_icm42607: Add inv_icm42607 Core Driver
  iio: imu: inv_icm42607: Add I2C and SPI For icm42607
  iio: imu: inv_icm42607: Add PM support for icm42607
  iio: imu: inv_icm42607: Add Temp Support in icm42607
  iio: imu: inv_icm42607: Add Accelerometer for icm42607
  iio: imu: inv_icm42607: Add Gyroscope to icm42607
  arm64: dts: rockchip: Add icm42607p IMU for RG-DS

 .../bindings/iio/imu/invensense,icm42600.yaml |  20 +-
 .../dts/rockchip/rk3568-anbernic-rg-ds.dts    |   8 +-
 drivers/iio/imu/Kconfig                       |   1 +
 drivers/iio/imu/Makefile                      |   1 +
 drivers/iio/imu/inv_icm42607/Kconfig          |  30 +
 drivers/iio/imu/inv_icm42607/Makefile         |  13 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   | 421 ++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_accel.c | 465 +++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  | 539 ++++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_gyro.c  | 437 ++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_i2c.c   |  95 +++
 .../iio/imu/inv_icm42607/inv_icm42607_spi.c   | 107 ++++
 .../iio/imu/inv_icm42607/inv_icm42607_temp.c  |  82 +++
 .../iio/imu/inv_icm42607/inv_icm42607_temp.h  |  33 ++
 14 files changed, 2250 insertions(+), 2 deletions(-)
 create mode 100644 drivers/iio/imu/inv_icm42607/Kconfig
 create mode 100644 drivers/iio/imu/inv_icm42607/Makefile
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607.h
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h

-- 
2.43.0

[PATCH V10 1/9] dt-bindings: iio: imu: icm42600: Add mount-matrix to icm42600

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add mount-matrix attribute to schema. This attribute has been supported
since the first revision of this driver, but was not documented.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../devicetree/bindings/iio/imu/invensense,icm42600.yaml        | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 119e28a833fd3..9b2af104f186d 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -53,6 +53,8 @@ properties:
   drive-open-drain:
     type: boolean
 
+  mount-matrix: true
+
   vdd-supply:
     description: Regulator that provides power to the sensor
 
-- 
2.43.0

[PATCH V10 2/9] dt-bindings: iio: imu: icm42600: Add icm42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add the ICM42607 and ICM42607P inertial measurement unit.

This device is functionally very similar to the icm42600 series with a
very different register layout. The driver does not require an
interrupt for these specific chip revisions.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../bindings/iio/imu/invensense,icm42600.yaml  | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 9b2af104f186d..81b6e85decd52 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -30,6 +30,8 @@ properties:
       - invensense,icm42600
       - invensense,icm42602
       - invensense,icm42605
+      - invensense,icm42607
+      - invensense,icm42607p
       - invensense,icm42622
       - invensense,icm42631
       - invensense,icm42686
@@ -67,10 +69,24 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - invensense,icm42600
+              - invensense,icm42602
+              - invensense,icm42605
+              - invensense,icm42622
+              - invensense,icm42631
+              - invensense,icm42686
+              - invensense,icm42688
+    then:
+      required:
+        - interrupts
 
 unevaluatedProperties: false
 
-- 
2.43.0

[PATCH V10 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add the core component of a new inv_icm42607 driver. This includes
a few setup functions and the full register definition in the
header file.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   | 334 ++++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  | 200 +++++++++++
 2 files changed, 534 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607.h
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_core.c

diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
new file mode 100644
index 0000000000000..1fa9e4e11b2ee
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -0,0 +1,334 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#ifndef INV_ICM42607_H_
+#define INV_ICM42607_H_
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+enum inv_icm42607_sensor_mode {
+	INV_ICM42607_SENSOR_MODE_OFF,
+	INV_ICM42607_SENSOR_MODE_STANDBY,
+	INV_ICM42607_SENSOR_MODE_LOW_POWER,
+	INV_ICM42607_SENSOR_MODE_LOW_NOISE,
+	INV_ICM42607_SENSOR_MODE_NB
+};
+
+/* gyroscope fullscale values */
+enum inv_icm42607_gyro_fs {
+	INV_ICM42607_GYRO_FS_2000DPS,
+	INV_ICM42607_GYRO_FS_1000DPS,
+	INV_ICM42607_GYRO_FS_500DPS,
+	INV_ICM42607_GYRO_FS_250DPS,
+	INV_ICM42607_GYRO_FS_NB
+};
+
+/* accelerometer fullscale values */
+enum inv_icm42607_accel_fs {
+	INV_ICM42607_ACCEL_FS_16G,
+	INV_ICM42607_ACCEL_FS_8G,
+	INV_ICM42607_ACCEL_FS_4G,
+	INV_ICM42607_ACCEL_FS_2G,
+	INV_ICM42607_ACCEL_FS_NB
+};
+
+/* ODR values */
+enum inv_icm42607_odr {
+	INV_ICM42607_ODR_1600HZ = 5,
+	INV_ICM42607_ODR_800HZ,
+	INV_ICM42607_ODR_400HZ,
+	INV_ICM42607_ODR_200HZ,
+	INV_ICM42607_ODR_100HZ,
+	INV_ICM42607_ODR_50HZ,
+	INV_ICM42607_ODR_25HZ,
+	INV_ICM42607_ODR_12_5HZ,
+	INV_ICM42607_ODR_6_25HZ_LP,
+	INV_ICM42607_ODR_3_125HZ_LP,
+	INV_ICM42607_ODR_1_5625HZ_LP,
+	INV_ICM42607_ODR_NB
+};
+
+enum inv_icm42607_filter_bw {
+	/* Low-Noise mode sensor data filter (bandwidth) */
+	INV_ICM42607_FILTER_BYPASS,
+	INV_ICM42607_FILTER_BW_180HZ,
+	INV_ICM42607_FILTER_BW_121HZ,
+	INV_ICM42607_FILTER_BW_73HZ,
+	INV_ICM42607_FILTER_BW_53HZ,
+	INV_ICM42607_FILTER_BW_34HZ,
+	INV_ICM42607_FILTER_BW_25HZ,
+	INV_ICM42607_FILTER_BW_16HZ,
+	INV_ICM42607_FILTER_BW_NB
+};
+
+struct inv_icm42607_sensor_conf {
+	int mode;
+	int fs;
+	int odr;
+	int filter;
+};
+
+struct inv_icm42607_conf {
+	struct inv_icm42607_sensor_conf gyro;
+	struct inv_icm42607_sensor_conf accel;
+	bool temp_en;
+};
+
+struct inv_icm42607_hw {
+	uint8_t whoami;
+	const char *name;
+	const struct inv_icm42607_conf *conf;
+};
+
+/**
+ *  struct inv_icm42607_state - driver state variables
+ *  @lock:		lock for serializing multiple registers access.
+ *  @hw:		Hardware specific data.
+ *  @map:		regmap pointer.
+ *  @vddio_supply:	I/O voltage regulator for the chip.
+ *  @orientation:	sensor chip orientation relative to main hardware.
+ *  @conf:		chip sensors configurations.
+ */
+struct inv_icm42607_state {
+	struct mutex lock;
+	const struct inv_icm42607_hw *hw;
+	struct regmap *map;
+	struct regulator *vddio_supply;
+	struct iio_mount_matrix orientation;
+	struct inv_icm42607_conf conf;
+};
+
+/* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
+
+/* Register Map for User Bank 0 */
+#define INV_ICM42607_REG_MCLK_RDY			0x00
+
+#define INV_ICM42607_REG_DEVICE_CONFIG			0x01
+#define INV_ICM42607_DEVICE_CONFIG_SPI_AP_4WIRE		BIT(2)
+#define INV_ICM42607_DEVICE_CONFIG_SPI_MODE		BIT(0)
+
+#define INV_ICM42607_REG_SIGNAL_PATH_RESET		0x02
+#define INV_ICM42607_SIGNAL_PATH_RESET_SOFT_RESET	BIT(4)
+#define INV_ICM42607_SIGNAL_PATH_RESET_FIFO_FLUSH	BIT(2)
+
+#define INV_ICM42607_REG_DRIVE_CONFIG1			0x03
+#define INV_ICM42607_DRIVE_CONFIG1_I3C_DDR_MASK		GENMASK(5, 3)
+#define INV_ICM42607_DRIVE_CONFIG1_I3C_SDR_MASK		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_DRIVE_CONFIG2			0x04
+#define INV_ICM42607_DRIVE_CONFIG2_I2C_MASK		GENMASK(5, 3)
+#define INV_ICM42607_DRIVE_CONFIG2_ALL_MASK		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_DRIVE_CONFIG3			0x05
+#define INV_ICM42607_DRIVE_CONFIG3_SPI_MASK		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_INT_CONFIG			0x06
+#define INV_ICM42607_INT_CONFIG_INT2_LATCHED		BIT(5)
+#define INV_ICM42607_INT_CONFIG_INT2_PUSH_PULL		BIT(4)
+#define INV_ICM42607_INT_CONFIG_INT2_ACTIVE_HIGH	BIT(3)
+#define INV_ICM42607_INT_CONFIG_INT2_ACTIVE_LOW		0x00
+#define INV_ICM42607_INT_CONFIG_INT1_LATCHED		BIT(2)
+#define INV_ICM42607_INT_CONFIG_INT1_PUSH_PULL		BIT(1)
+#define INV_ICM42607_INT_CONFIG_INT1_ACTIVE_HIGH	BIT(0)
+#define INV_ICM42607_INT_CONFIG_INT1_ACTIVE_LOW		0x00
+
+/* all sensor data are 16 bits (2 registers wide) in big-endian */
+#define INV_ICM42607_REG_TEMP_DATA1			0x09
+#define INV_ICM42607_REG_TEMP_DATA0			0x0A
+#define INV_ICM42607_REG_ACCEL_DATA_X1			0x0B
+#define INV_ICM42607_REG_ACCEL_DATA_X0			0x0C
+#define INV_ICM42607_REG_ACCEL_DATA_Y1			0x0D
+#define INV_ICM42607_REG_ACCEL_DATA_Y0			0x0E
+#define INV_ICM42607_REG_ACCEL_DATA_Z1			0x0F
+#define INV_ICM42607_REG_ACCEL_DATA_Z0			0x10
+#define INV_ICM42607_REG_GYRO_DATA_X1			0x11
+#define INV_ICM42607_REG_GYRO_DATA_X0			0x12
+#define INV_ICM42607_REG_GYRO_DATA_Y1			0x13
+#define INV_ICM42607_REG_GYRO_DATA_Y0			0x14
+#define INV_ICM42607_REG_GYRO_DATA_Z1			0x15
+#define INV_ICM42607_REG_GYRO_DATA_Z0			0x16
+#define INV_ICM42607_DATA_INVALID			-32768
+
+#define INV_ICM42607_REG_TMST_FSYNCH			0x17
+#define INV_ICM42607_REG_TMST_FSYNCL			0x18
+
+/* APEX Data Registers */
+#define INV_ICM42607_REG_APEX_DATA0			0x31
+#define INV_ICM42607_REG_APEX_DATA1			0x32
+#define INV_ICM42607_REG_APEX_DATA2			0x33
+#define INV_ICM42607_REG_APEX_DATA3			0x34
+#define INV_ICM42607_REG_APEX_DATA4			0x1D
+#define INV_ICM42607_REG_APEX_DATA5			0x1E
+
+#define INV_ICM42607_REG_PWR_MGMT0			0x1F
+#define INV_ICM42607_PWR_MGMT0_ACCEL_LP_CLK_SEL		BIT(7)
+#define INV_ICM42607_PWR_MGMT0_IDLE			BIT(4)
+#define INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK		GENMASK(3, 2)
+#define INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK		GENMASK(1, 0)
+
+#define INV_ICM42607_REG_GYRO_CONFIG0			0x20
+#define INV_ICM42607_GYRO_CONFIG0_FS_SEL_MASK		GENMASK(6, 5)
+#define INV_ICM42607_GYRO_CONFIG0_ODR_MASK		GENMASK(3, 0)
+
+#define INV_ICM42607_REG_ACCEL_CONFIG0			0x21
+#define INV_ICM42607_ACCEL_CONFIG0_FS_SEL_MASK		GENMASK(6, 5)
+#define INV_ICM42607_ACCEL_CONFIG0_ODR_MASK		GENMASK(3, 0)
+
+#define INV_ICM42607_REG_TEMP_CONFIG0			0x22
+#define INV_ICM42607_TEMP_CONFIG0_FILTER_MASK		GENMASK(6, 4)
+
+#define INV_ICM42607_REG_GYRO_CONFIG1			0x23
+#define INV_ICM42607_GYRO_CONFIG1_FILTER_MASK		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_ACCEL_CONFIG1			0x24
+#define INV_ICM42607_ACCEL_CONFIG1_AVG_MASK		GENMASK(6, 4)
+#define INV_ICM42607_ACCEL_CONFIG1_FILTER_MASK		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_APEX_CONFIG0			0x25
+#define INV_ICM42607_APEX_CONFIG0_DMP_POWER_SAVE_EN	BIT(3)
+#define INV_ICM42607_APEX_CONFIG0_DMP_INIT_EN		BIT(2)
+#define INV_ICM42607_APEX_CONFIG0_DMP_MEM_RESET_EN	BIT(0)
+
+#define INV_ICM42607_REG_APEX_CONFIG1			0x26
+#define INV_ICM42607_APEX_CONFIG1_SMD_ENABLE		BIT(6)
+#define INV_ICM42607_APEX_CONFIG1_FF_ENABLE		BIT(5)
+#define INV_ICM42607_APEX_CONFIG1_TILT_ENABLE		BIT(4)
+#define INV_ICM42607_APEX_CONFIG1_PED_ENABLE		BIT(3)
+#define INV_ICM42607_APEX_CONFIG1_DMP_ODR_MASK		GENMASK(1, 0)
+
+#define INV_ICM42607_REG_WOM_CONFIG			0x27
+#define INV_ICM42607_WOM_CONFIG_INT_DUR_MASK		GENMASK(4, 3)
+#define INV_ICM42607_WOM_CONFIG_INT_MODE		BIT(2)
+#define INV_ICM42607_WOM_CONFIG_MODE			BIT(1)
+#define INV_ICM42607_WOM_CONFIG_EN			BIT(0)
+
+#define INV_ICM42607_REG_FIFO_CONFIG1			0x28
+#define INV_ICM42607_FIFO_CONFIG1_MODE			BIT(1)
+#define INV_ICM42607_FIFO_CONFIG1_BYPASS		BIT(0)
+
+#define INV_ICM42607_REG_FIFO_CONFIG2			0x29
+#define INV_ICM42607_REG_FIFO_CONFIG3			0x2A
+#define INV_ICM42607_FIFO_WATERMARK_VAL(_wm)		\
+		cpu_to_le16((_wm) & GENMASK(11, 0))
+/* FIFO is 2048 bytes, let 12 samples for reading latency */
+#define INV_ICM42607_FIFO_WATERMARK_MAX			(2048 - 12 * 16)
+#define INV_ICM42607_FIFO_1SENSOR_PACKET_SIZE		8
+#define INV_ICM42607_FIFO_2SENSORS_PACKET_SIZE		16
+
+#define INV_ICM42607_REG_INT_SOURCE0			0x2B
+#define INV_ICM42607_INT_SOURCE0_ST_INT1_EN		BIT(7)
+#define INV_ICM42607_INT_SOURCE0_FSYNC_INT1_EN		BIT(6)
+#define INV_ICM42607_INT_SOURCE0_PLL_RDY_INT1_EN	BIT(5)
+#define INV_ICM42607_INT_SOURCE0_RESET_DONE_INT1_EN	BIT(4)
+#define INV_ICM42607_INT_SOURCE0_DRDY_INT1_EN		BIT(3)
+#define INV_ICM42607_INT_SOURCE0_FIFO_THS_INT1_EN	BIT(2)
+#define INV_ICM42607_INT_SOURCE0_FIFO_FULL_INT1_EN	BIT(1)
+#define INV_ICM42607_INT_SOURCE0_AGC_RDY_INT1_EN	BIT(0)
+
+#define INV_ICM42607_REG_INT_SOURCE1			0x2C
+#define INV_ICM42607_INT_SOURCE1_I3C_ERROR_INT1_EN	BIT(6)
+#define INV_ICM42607_INT_SOURCE1_SMD_INT1_EN		BIT(3)
+#define INV_ICM42607_INT_SOURCE1_WOM_INT1_EN		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_INT_SOURCE3			0x2D
+#define INV_ICM42607_INT_SOURCE3_ST_INT2_EN		BIT(7)
+#define INV_ICM42607_INT_SOURCE3_FSYNC_INT2_EN		BIT(6)
+#define INV_ICM42607_INT_SOURCE3_PLL_RDY_INT2_EN	BIT(5)
+#define INV_ICM42607_INT_SOURCE3_RESET_DONE_INT2_EN	BIT(4)
+#define INV_ICM42607_INT_SOURCE3_DRDY_INT2_EN		BIT(3)
+#define INV_ICM42607_INT_SOURCE3_FIFO_THS_INT2_EN	BIT(2)
+#define INV_ICM42607_INT_SOURCE3_FIFO_FULL_INT2_EN	BIT(1)
+#define INV_ICM42607_INT_SOURCE3_AGC_RDY_INT2_EN	BIT(0)
+
+#define INV_ICM42607_REG_INT_SOURCE4			0x2E
+#define INV_ICM42607_INT_SOURCE4_I3C_ERROR_INT2_EN	BIT(6)
+#define INV_ICM42607_INT_SOURCE4_SMD_INT2_EN		BIT(3)
+#define INV_ICM42607_INT_SOURCE4_WOM_Z_INT2_EN		BIT(2)
+#define INV_ICM42607_INT_SOURCE4_WOM_Y_INT2_EN		BIT(1)
+#define INV_ICM42607_INT_SOURCE4_WOM_X_INT2_EN		BIT(0)
+
+#define INV_ICM42607_REG_FIFO_LOST_PKT0			0x2F
+#define INV_ICM42607_REG_FIFO_LOST_PKT1			0x30
+
+#define INV_ICM42607_REG_INTF_CONFIG0			0x35
+#define INV_ICM42607_INTF_CONFIG0_FIFO_COUNT_FORMAT	BIT(6)
+#define INV_ICM42607_INTF_CONFIG0_FIFO_COUNT_ENDIAN	BIT(5)
+#define INV_ICM42607_INTF_CONFIG0_SENSOR_DATA_ENDIAN	BIT(4)
+#define INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_MASK	GENMASK(1, 0)
+#define INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS	\
+	FIELD_PREP(INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_MASK, 2)
+#define INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_I2C_DIS	\
+	FIELD_PREP(INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_MASK, 3)
+
+#define INV_ICM42607_REG_INTF_CONFIG1			0x36
+#define INV_ICM42607_INTF_CONFIG1_I3C_SDR_EN		BIT(3)
+#define INV_ICM42607_INTF_CONFIG1_I3C_DDR_EN		BIT(2)
+#define INV_ICM42607_INTF_CONFIG1_CLKSEL_MASK		GENMASK(1, 0)
+#define INV_ICM42607_INTF_CONFIG1_CLKSEL_INT		0
+#define INV_ICM42607_INTF_CONFIG1_CLKSEL_PLL		1
+#define INV_ICM42607_INTF_CONFIG1_CLKSEL_OFF		2
+
+#define INV_ICM42607_REG_INT_STATUS_DRDY		0x39
+#define INV_ICM42607_INT_STATUS_DRDY_DATA_RDY		BIT(0)
+
+#define INV_ICM42607_REG_INT_STATUS			0x3A
+#define INV_ICM42607_INT_STATUS_ST			BIT(7)
+#define INV_ICM42607_INT_STATUS_FSYNC			BIT(6)
+#define INV_ICM42607_INT_STATUS_PLL_RDY			BIT(5)
+#define INV_ICM42607_INT_STATUS_RESET_DONE		BIT(4)
+#define INV_ICM42607_INT_STATUS_FIFO_THS		BIT(2)
+#define INV_ICM42607_INT_STATUS_FIFO_FULL		BIT(1)
+#define INV_ICM42607_INT_STATUS_AGC_RDY			BIT(0)
+
+#define INV_ICM42607_REG_INT_STATUS2			0x3B
+#define INV_ICM42607_INT_STATUS2_SMD			BIT(3)
+#define INV_ICM42607_INT_STATUS2_WOM_INT		GENMASK(2, 0)
+
+#define INV_ICM42607_REG_INT_STATUS3			0x3C
+#define INV_ICM42607_INT_STATUS3_STEP_DET		BIT(5)
+#define INV_ICM42607_INT_STATUS3_STEP_CNT_OVF		BIT(4)
+#define INV_ICM42607_INT_STATUS3_TILT_DET		BIT(3)
+#define INV_ICM42607_INT_STATUS3_FF_DET			BIT(2)
+
+/*
+ * FIFO access registers
+ * FIFO count is 16 bits (2 registers) big-endian
+ * FIFO data is a continuous read register to read FIFO content
+ */
+#define INV_ICM42607_REG_FIFO_COUNTH			0x3D
+#define INV_ICM42607_REG_FIFO_COUNTL			0x3E
+#define INV_ICM42607_REG_FIFO_DATA			0x3F
+
+#define INV_ICM42607_REG_ACCEL_WOM_X_THR		0x4b
+#define INV_ICM42607_REG_ACCEL_WOM_Y_THR		0x4c
+#define INV_ICM42607_REG_ACCEL_WOM_Z_THR		0x4d
+
+#define INV_ICM42607_REG_WHOAMI				0x75
+#define INV_ICM42607P_WHOAMI				0x60
+#define INV_ICM42607_WHOAMI				0x67
+
+/* Timings as listed in section 3 of datasheet */
+#define INV_ICM42607_POWER_UP_TIME_US			100000
+#define INV_ICM42607_RESET_TIME_MS			1
+#define INV_ICM42607_ACCEL_STARTUP_TIME_MS		10
+#define INV_ICM42607_GYRO_STARTUP_TIME_MS		30
+#define INV_ICM42607_TEMP_STARTUP_TIME_MS		77
+
+typedef int (*inv_icm42607_bus_setup)(struct inv_icm42607_state *);
+
+extern const struct regmap_config inv_icm42607_regmap_config;
+extern const struct inv_icm42607_hw inv_icm42607_hw_data;
+extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
+
+int inv_icm42607_core_probe(struct regmap *regmap,
+			    const struct inv_icm42607_hw *hw,
+			    inv_icm42607_bus_setup bus_setup);
+
+#endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
new file mode 100644
index 0000000000000..74d4cb03f7b86
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/dev_printk.h>
+#include <linux/interrupt.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include "inv_icm42607.h"
+
+static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
+				 const struct inv_icm42607_conf *conf)
+{
+	unsigned int val;
+	int ret;
+
+	val = FIELD_PREP(INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK, conf->gyro.mode);
+	val |= FIELD_PREP(INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK, conf->accel.mode);
+	/*
+	 * No temperature enable reg in datasheet, but BSP driver selected RC
+	 * oscillator clock in LP mode when temperature was disabled.
+	 */
+	if (!conf->temp_en)
+		val |= INV_ICM42607_PWR_MGMT0_ACCEL_LP_CLK_SEL;
+	ret = regmap_write(st->map, INV_ICM42607_REG_PWR_MGMT0, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_FS_SEL_MASK, conf->gyro.fs);
+	val |= FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_ODR_MASK, conf->gyro.odr);
+	ret = regmap_write(st->map, INV_ICM42607_REG_GYRO_CONFIG0, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(INV_ICM42607_ACCEL_CONFIG0_FS_SEL_MASK, conf->accel.fs);
+	val |= FIELD_PREP(INV_ICM42607_ACCEL_CONFIG0_ODR_MASK, conf->accel.odr);
+	ret = regmap_write(st->map, INV_ICM42607_REG_ACCEL_CONFIG0, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG1_FILTER_MASK, conf->gyro.filter);
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_GYRO_CONFIG1,
+				 INV_ICM42607_GYRO_CONFIG1_FILTER_MASK, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(INV_ICM42607_ACCEL_CONFIG1_FILTER_MASK, conf->accel.filter);
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_ACCEL_CONFIG1,
+				 INV_ICM42607_ACCEL_CONFIG1_FILTER_MASK, val);
+	if (ret)
+		return ret;
+
+	st->conf = *conf;
+
+	return 0;
+}
+
+/**
+ *  inv_icm42607_setup() - check and setup chip
+ *  @st:	driver internal state
+ *  @bus_setup:	callback for setting up bus specific registers
+ *
+ *  Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_icm42607_setup(struct inv_icm42607_state *st,
+			      inv_icm42607_bus_setup bus_setup)
+{
+	const struct device *dev = regmap_get_device(st->map);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(st->map, INV_ICM42607_REG_WHOAMI, &val);
+	if (ret)
+		return ret;
+
+	if (val != st->hw->whoami)
+		dev_warn(dev, "Unknown whoami %#02x expected %#02x (%s)\n",
+			 val, st->hw->whoami, st->hw->name);
+
+	ret = regmap_write(st->map, INV_ICM42607_REG_SIGNAL_PATH_RESET,
+			   INV_ICM42607_SIGNAL_PATH_RESET_SOFT_RESET);
+	if (ret)
+		return ret;
+
+	fsleep(INV_ICM42607_RESET_TIME_MS * 1000);
+
+	ret = regmap_read_poll_timeout(st->map, INV_ICM42607_REG_INT_STATUS,
+				       val, val & INV_ICM42607_INT_STATUS_RESET_DONE,
+				       INV_ICM42607_RESET_TIME_MS * 100,
+				       INV_ICM42607_RESET_TIME_MS * 10000);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "reset error, reset done bit not set\n");
+
+	/* Sync the regcache again after a reset. */
+	regcache_mark_dirty(st->map);
+	ret = regcache_sync(st->map);
+	if (ret)
+		return ret;
+
+	ret = bus_setup(st);
+	if (ret)
+		return ret;
+
+	ret = regmap_set_bits(st->map, INV_ICM42607_REG_INTF_CONFIG0,
+			      INV_ICM42607_INTF_CONFIG0_SENSOR_DATA_ENDIAN);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_INTF_CONFIG1,
+				 INV_ICM42607_INTF_CONFIG1_CLKSEL_MASK,
+				 INV_ICM42607_INTF_CONFIG1_CLKSEL_PLL);
+	if (ret)
+		return ret;
+
+	return inv_icm42607_set_conf(st, st->hw->conf);
+}
+
+static int inv_icm42607_enable_vddio_reg(struct inv_icm42607_state *st)
+{
+	int ret;
+
+	ret = regulator_enable(st->vddio_supply);
+	if (ret)
+		return ret;
+
+	fsleep(INV_ICM42607_POWER_UP_TIME_US);
+
+	return 0;
+}
+
+static void inv_icm42607_disable_vddio_reg(void *_data)
+{
+	struct inv_icm42607_state *st = _data;
+
+	regulator_disable(st->vddio_supply);
+}
+
+int inv_icm42607_core_probe(struct regmap *regmap,
+			    const struct inv_icm42607_hw *hw,
+			    inv_icm42607_bus_setup bus_setup)
+{
+	struct device *dev = regmap_get_device(regmap);
+	struct inv_icm42607_state *st;
+	int ret;
+
+	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	ret = devm_mutex_init(dev, &st->lock);
+	if (ret)
+		return ret;
+
+	st->hw = hw;
+	st->map = regmap;
+
+	ret = iio_read_mount_matrix(dev, &st->orientation);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to retrieve mounting matrix %d\n", ret);
+
+	ret = devm_regulator_get_enable(dev, "vdd");
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to get vdd regulator\n");
+
+	st->vddio_supply = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(st->vddio_supply))
+		return dev_err_probe(dev, PTR_ERR(st->vddio_supply),
+				     "Failed to get vddio regulator\n");
+
+	ret = inv_icm42607_enable_vddio_reg(st);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, inv_icm42607_disable_vddio_reg, st);
+	if (ret)
+		return ret;
+
+	/* Setup chip registers (includes WHOAMI check, reset check, bus setup) */
+	ret = inv_icm42607_setup(st, bus_setup);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-42607x device driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_INV_SENSORS_TIMESTAMP");
-- 
2.43.0

[PATCH V10 4/9] iio: imu: inv_icm42607: Add I2C and SPI For icm42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add I2C and SPI driver support for InvenSense ICM-42607 devices.
Add necessary Kconfig and Makefile to allow building of (incomplete)
driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/Kconfig                       |   1 +
 drivers/iio/imu/Makefile                      |   1 +
 drivers/iio/imu/inv_icm42607/Kconfig          |  30 +++++
 drivers/iio/imu/inv_icm42607/Makefile         |  10 ++
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |  16 +++
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  |  57 ++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_i2c.c   |  94 ++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_spi.c   | 106 ++++++++++++++++++
 8 files changed, 315 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/Kconfig
 create mode 100644 drivers/iio/imu/inv_icm42607/Makefile
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c

diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 7e0181c27bb69..8bab4616be208 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -109,6 +109,7 @@ config KMX61
 	  be called kmx61.
 
 source "drivers/iio/imu/inv_icm42600/Kconfig"
+source "drivers/iio/imu/inv_icm42607/Kconfig"
 source "drivers/iio/imu/inv_icm45600/Kconfig"
 source "drivers/iio/imu/inv_mpu6050/Kconfig"
 
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index 13fb7846e9c98..3268dc2371aed 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
 obj-$(CONFIG_FXOS8700_SPI) += fxos8700_spi.o
 
 obj-y += inv_icm42600/
+obj-y += inv_icm42607/
 obj-y += inv_icm45600/
 obj-y += inv_mpu6050/
 
diff --git a/drivers/iio/imu/inv_icm42607/Kconfig b/drivers/iio/imu/inv_icm42607/Kconfig
new file mode 100644
index 0000000000000..7ba64e6e8d806
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config INV_ICM42607
+	tristate
+	select IIO_BUFFER
+	select IIO_INV_SENSORS_TIMESTAMP
+
+config INV_ICM42607_I2C
+	tristate "InvenSense ICM-42607X I2C driver"
+	depends on I2C
+	select INV_ICM42607
+	select REGMAP_I2C
+	help
+	  This driver supports the InvenSense ICM-42607 motion tracking
+	  device over I2C.
+
+	  This driver can be built as a module. The module will be called
+	  inv-icm42607-i2c.
+
+config INV_ICM42607_SPI
+	tristate "InvenSense ICM-42607X SPI driver"
+	depends on SPI_MASTER
+	select INV_ICM42607
+	select REGMAP_SPI
+	help
+	  This driver supports the InvenSense ICM-42607 motion tracking
+	  device over SPI.
+
+	  This driver can be built as a module. The module will be called
+	  inv-icm42607-spi.
diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
new file mode 100644
index 0000000000000..be109102e2035
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
+inv-icm42607-y += inv_icm42607_core.o
+
+obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
+inv-icm42607-i2c-y += inv_icm42607_i2c.o
+
+obj-$(CONFIG_INV_ICM42607_SPI) += inv-icm42607-spi.o
+inv-icm42607-spi-y += inv_icm42607_spi.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 1fa9e4e11b2ee..7928f81300ed8 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -13,6 +13,22 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
+/*
+ * Serial bus slew rates. Rates are expressed as range between the two
+ * values with the midpoint as the typical rate. For the final value of
+ * 2ns, 2ns is considered the max value with no expressed minimum or
+ * typical value.
+ */
+enum inv_icm42607_slew_rate {
+	INV_ICM42607_SLEW_RATE_20_60NS,
+	INV_ICM42607_SLEW_RATE_12_36NS,
+	INV_ICM42607_SLEW_RATE_6_19NS,
+	INV_ICM42607_SLEW_RATE_4_14NS,
+	INV_ICM42607_SLEW_RATE_2_8NS,
+	INV_ICM42607_SLEW_RATE_2NS,
+	INV_ICM42607_SLEW_RATE_NB
+};
+
 enum inv_icm42607_sensor_mode {
 	INV_ICM42607_SENSOR_MODE_OFF,
 	INV_ICM42607_SENSOR_MODE_STANDBY,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 74d4cb03f7b86..4448d63e95fd7 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -15,6 +15,63 @@
 
 #include "inv_icm42607.h"
 
+static bool inv_icm42607_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case INV_ICM42607_REG_MCLK_RDY:
+	case INV_ICM42607_REG_SIGNAL_PATH_RESET:
+	case INV_ICM42607_REG_TEMP_DATA1 ... INV_ICM42607_REG_APEX_DATA5:
+	case INV_ICM42607_REG_APEX_CONFIG0:
+	case INV_ICM42607_REG_FIFO_CONFIG2 ... INV_ICM42607_REG_FIFO_CONFIG3:
+	case INV_ICM42607_REG_FIFO_LOST_PKT0 ... INV_ICM42607_REG_APEX_DATA3:
+	case INV_ICM42607_REG_INT_STATUS_DRDY:
+	case INV_ICM42607_REG_INT_STATUS ... INV_ICM42607_REG_FIFO_DATA:
+		return true;
+	}
+
+	return false;
+}
+
+const struct regmap_config inv_icm42607_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = INV_ICM42607_REG_WHOAMI,
+	.cache_type = REGCACHE_MAPLE,
+	.volatile_reg = inv_icm42607_is_volatile_reg,
+};
+EXPORT_SYMBOL_NS_GPL(inv_icm42607_regmap_config, "IIO_ICM42607");
+
+/* chip initial default configuration */
+static const struct inv_icm42607_conf inv_icm42607_default_conf = {
+	.gyro = {
+		.mode = INV_ICM42607_SENSOR_MODE_OFF,
+		.fs = INV_ICM42607_GYRO_FS_1000DPS,
+		.odr = INV_ICM42607_ODR_100HZ,
+		.filter = INV_ICM42607_FILTER_BW_25HZ,
+	},
+	.accel = {
+		.mode = INV_ICM42607_SENSOR_MODE_OFF,
+		.fs = INV_ICM42607_ACCEL_FS_4G,
+		.odr = INV_ICM42607_ODR_100HZ,
+		.filter = INV_ICM42607_FILTER_BW_25HZ,
+	},
+	.temp_en = false,
+};
+
+const struct inv_icm42607_hw inv_icm42607_hw_data = {
+	.whoami = INV_ICM42607_WHOAMI,
+	.name = "icm42607",
+	.conf = &inv_icm42607_default_conf,
+};
+EXPORT_SYMBOL_NS_GPL(inv_icm42607_hw_data, "IIO_ICM42607");
+
+const struct inv_icm42607_hw inv_icm42607p_hw_data = {
+	.whoami = INV_ICM42607P_WHOAMI,
+	.name = "icm42607p",
+	.conf = &inv_icm42607_default_conf,
+};
+EXPORT_SYMBOL_NS_GPL(inv_icm42607p_hw_data, "IIO_ICM42607");
+
 static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
 				 const struct inv_icm42607_conf *conf)
 {
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
new file mode 100644
index 0000000000000..22ac51108cd3b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include "inv_icm42607.h"
+
+static int inv_icm42607_i2c_bus_setup(struct inv_icm42607_state *st)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_clear_bits(st->map, INV_ICM42607_REG_INTF_CONFIG1,
+				INV_ICM42607_INTF_CONFIG1_I3C_DDR_EN |
+				INV_ICM42607_INTF_CONFIG1_I3C_SDR_EN);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(INV_ICM42607_DRIVE_CONFIG2_I2C_MASK,
+			 INV_ICM42607_SLEW_RATE_12_36NS);
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_DRIVE_CONFIG2,
+				 INV_ICM42607_DRIVE_CONFIG2_I2C_MASK, val);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(st->map, INV_ICM42607_REG_INTF_CONFIG0,
+				  INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_MASK,
+				  INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_SPI_DIS);
+}
+
+static int inv_icm42607_probe(struct i2c_client *client)
+{
+	const struct inv_icm42607_hw *hw;
+	struct regmap *regmap;
+
+	hw = i2c_get_match_data(client);
+	if (!hw)
+		return dev_err_probe(&client->dev, -ENODEV,
+				     "Failed to get i2c data\n");
+
+	regmap = devm_regmap_init_i2c(client, &inv_icm42607_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(regmap),
+				     "Failed to register i2c regmap %ld\n",
+				     PTR_ERR(regmap));
+
+	return inv_icm42607_core_probe(regmap, hw, inv_icm42607_i2c_bus_setup);
+}
+
+static const struct i2c_device_id inv_icm42607_id[] = {
+	{
+		.name = "icm42607",
+		.driver_data = (kernel_ulong_t)&inv_icm42607_hw_data
+	}, {
+		.name = "icm42607p",
+		.driver_data = (kernel_ulong_t)&inv_icm42607p_hw_data
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, inv_icm42607_id);
+
+static const struct of_device_id inv_icm42607_of_matches[] = {
+	{
+		.compatible = "invensense,icm42607",
+		.data = &inv_icm42607_hw_data,
+	}, {
+		.compatible = "invensense,icm42607p",
+		.data = &inv_icm42607p_hw_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, inv_icm42607_of_matches);
+
+static struct i2c_driver inv_icm42607_driver = {
+	.driver = {
+		.name = "inv-icm42607-i2c",
+		.of_match_table = inv_icm42607_of_matches,
+	},
+	.id_table = inv_icm42607_id,
+	.probe = inv_icm42607_probe,
+};
+module_i2c_driver(inv_icm42607_driver);
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-42607x I2C driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_ICM42607");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
new file mode 100644
index 0000000000000..421d3ec1cded3
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "inv_icm42607.h"
+
+static int inv_icm42607_spi_bus_setup(struct inv_icm42607_state *st)
+{
+	unsigned int val;
+	int ret;
+
+	/* Only support 4-wire mode for now. */
+	ret = regmap_set_bits(st->map, INV_ICM42607_REG_DEVICE_CONFIG,
+				      INV_ICM42607_DEVICE_CONFIG_SPI_AP_4WIRE);
+	if (ret)
+		return ret;
+
+	ret = regmap_clear_bits(st->map, INV_ICM42607_REG_INTF_CONFIG1,
+				INV_ICM42607_INTF_CONFIG1_I3C_DDR_EN |
+				INV_ICM42607_INTF_CONFIG1_I3C_SDR_EN);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(INV_ICM42607_DRIVE_CONFIG3_SPI_MASK,
+			 INV_ICM42607_SLEW_RATE_2NS);
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_DRIVE_CONFIG3,
+				 INV_ICM42607_DRIVE_CONFIG3_SPI_MASK, val);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(st->map, INV_ICM42607_REG_INTF_CONFIG0,
+				  INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_MASK,
+				  INV_ICM42607_INTF_CONFIG0_UI_SIFS_CFG_I2C_DIS);
+}
+
+static int inv_icm42607_probe(struct spi_device *spi)
+{
+	const struct inv_icm42607_hw *hw;
+	struct regmap *regmap;
+
+	hw = spi_get_device_match_data(spi);
+	if (!hw)
+		return dev_err_probe(&spi->dev, -ENODEV,
+				     "Failed to get SPI data\n");
+
+	if (spi->mode & SPI_3WIRE)
+		return dev_err_probe(&spi->dev, -ENODEV,
+				     "SPI 3-wire mode not supported\n");
+
+	regmap = devm_regmap_init_spi(spi, &inv_icm42607_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&spi->dev, PTR_ERR(regmap),
+				     "Failed to register spi regmap %ld\n",
+				     PTR_ERR(regmap));
+
+	return inv_icm42607_core_probe(regmap, hw,
+				       inv_icm42607_spi_bus_setup);
+}
+
+static const struct spi_device_id inv_icm42607_spi_id_table[] = {
+	{
+		.name = "icm42607",
+		.driver_data = (kernel_ulong_t)&inv_icm42607_hw_data
+	}, {
+		.name = "icm42607p",
+		.driver_data = (kernel_ulong_t)&inv_icm42607p_hw_data
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, inv_icm42607_spi_id_table);
+
+static const struct of_device_id inv_icm42607_of_matches[] = {
+	{
+		.compatible = "invensense,icm42607",
+		.data = &inv_icm42607_hw_data,
+	},
+	{
+		.compatible = "invensense,icm42607p",
+		.data = &inv_icm42607p_hw_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, inv_icm42607_of_matches);
+
+static struct spi_driver inv_icm42607_driver = {
+	.driver = {
+		.name = "inv-icm42607-spi",
+		.of_match_table = inv_icm42607_of_matches,
+	},
+	.id_table = inv_icm42607_spi_id_table,
+	.probe = inv_icm42607_probe,
+};
+module_spi_driver(inv_icm42607_driver);
+
+MODULE_AUTHOR("InvenSense, Inc.");
+MODULE_DESCRIPTION("InvenSense ICM-42607x SPI driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_ICM42607");
-- 
2.43.0

[PATCH V10 5/9] iio: imu: inv_icm42607: Add PM support for icm42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add power management support for the ICM42607 device driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |  18 +++
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  | 123 ++++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_i2c.c   |   1 +
 .../iio/imu/inv_icm42607/inv_icm42607_spi.c   |   1 +
 4 files changed, 143 insertions(+)

diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 7928f81300ed8..72327381b6dbc 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -10,6 +10,7 @@
 #include <linux/bitops.h>
 #include <linux/iio/iio.h>
 #include <linux/mutex.h>
+#include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
@@ -103,22 +104,32 @@ struct inv_icm42607_hw {
 	const struct inv_icm42607_conf *conf;
 };
 
+struct inv_icm42607_suspended {
+	enum inv_icm42607_sensor_mode gyro;
+	enum inv_icm42607_sensor_mode accel;
+	bool temp;
+};
+
 /**
  *  struct inv_icm42607_state - driver state variables
  *  @lock:		lock for serializing multiple registers access.
  *  @hw:		Hardware specific data.
  *  @map:		regmap pointer.
  *  @vddio_supply:	I/O voltage regulator for the chip.
+ *  @vddio_en:		I/O voltage status for runtime PM.
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
+ *  @suspended:		suspended sensors configuration.
  */
 struct inv_icm42607_state {
 	struct mutex lock;
 	const struct inv_icm42607_hw *hw;
 	struct regmap *map;
 	struct regulator *vddio_supply;
+	bool vddio_en;
 	struct iio_mount_matrix orientation;
 	struct inv_icm42607_conf conf;
+	struct inv_icm42607_suspended suspended;
 };
 
 /* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
@@ -337,11 +348,18 @@ struct inv_icm42607_state {
 #define INV_ICM42607_GYRO_STARTUP_TIME_MS		30
 #define INV_ICM42607_TEMP_STARTUP_TIME_MS		77
 
+/*
+ * Suspend delay assumed from other icm42600 series device, not
+ * documented in datasheet.
+ */
+#define INV_ICM42607_SUSPEND_DELAY_MS			2000
+
 typedef int (*inv_icm42607_bus_setup)(struct inv_icm42607_state *);
 
 extern const struct regmap_config inv_icm42607_regmap_config;
 extern const struct inv_icm42607_hw inv_icm42607_hw_data;
 extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
+extern const struct dev_pm_ops inv_icm42607_pm_ops;
 
 int inv_icm42607_core_probe(struct regmap *regmap,
 			    const struct inv_icm42607_hw *hw,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 4448d63e95fd7..39620da92bd43 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -9,6 +9,7 @@
 #include <linux/iio/iio.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -72,6 +73,51 @@ const struct inv_icm42607_hw inv_icm42607p_hw_data = {
 };
 EXPORT_SYMBOL_NS_GPL(inv_icm42607p_hw_data, "IIO_ICM42607");
 
+static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
+				      enum inv_icm42607_sensor_mode gyro,
+				      enum inv_icm42607_sensor_mode accel,
+				      bool temp, unsigned int *sleep_ms)
+{
+	enum inv_icm42607_sensor_mode oldgyro = st->conf.gyro.mode;
+	enum inv_icm42607_sensor_mode oldaccel = st->conf.accel.mode;
+	bool oldtemp = st->conf.temp_en;
+	unsigned int sleepval;
+	unsigned int val;
+	int ret;
+
+	if (gyro == oldgyro && accel == oldaccel && temp == oldtemp)
+		return 0;
+
+	val = FIELD_PREP(INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK, gyro);
+	val |= FIELD_PREP(INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK, accel);
+	if (!temp)
+		val |= INV_ICM42607_PWR_MGMT0_ACCEL_LP_CLK_SEL;
+	ret = regmap_write(st->map, INV_ICM42607_REG_PWR_MGMT0, val);
+	if (ret)
+		return ret;
+
+	st->conf.gyro.mode = gyro;
+	st->conf.accel.mode = accel;
+	st->conf.temp_en = temp;
+
+	sleepval = 0;
+	if (temp && !oldtemp)
+		sleepval = max(sleepval, INV_ICM42607_TEMP_STARTUP_TIME_MS);
+
+	if (accel != oldaccel)
+		sleepval = max(sleepval, INV_ICM42607_ACCEL_STARTUP_TIME_MS);
+
+	if (gyro != oldgyro)
+		sleepval = max(sleepval, INV_ICM42607_GYRO_STARTUP_TIME_MS);
+
+	if (sleep_ms)
+		*sleep_ms = sleepval;
+	else if (sleepval)
+		fsleep(sleepval * 1000);
+
+	return 0;
+}
+
 static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
 				 const struct inv_icm42607_conf *conf)
 {
@@ -184,12 +230,17 @@ static int inv_icm42607_enable_vddio_reg(struct inv_icm42607_state *st)
 {
 	int ret;
 
+	if (st->vddio_en)
+		return 0;
+
 	ret = regulator_enable(st->vddio_supply);
 	if (ret)
 		return ret;
 
 	fsleep(INV_ICM42607_POWER_UP_TIME_US);
 
+	st->vddio_en = true;
+
 	return 0;
 }
 
@@ -197,7 +248,12 @@ static void inv_icm42607_disable_vddio_reg(void *_data)
 {
 	struct inv_icm42607_state *st = _data;
 
+	if (!st->vddio_en)
+		return;
+
 	regulator_disable(st->vddio_supply);
+
+	st->vddio_en = false;
 }
 
 int inv_icm42607_core_probe(struct regmap *regmap,
@@ -247,10 +303,77 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 	if (ret)
 		return ret;
 
+	ret = devm_pm_runtime_set_active_enabled(dev);
+	if (ret)
+		return ret;
+
+	pm_runtime_set_autosuspend_delay(dev, INV_ICM42607_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
 
+static int inv_icm42607_suspend(struct device *dev)
+{
+	struct inv_icm42607_state *st = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_force_suspend(dev);
+	if (ret)
+		return ret;
+
+	inv_icm42607_disable_vddio_reg(st);
+
+	return 0;
+}
+
+static int inv_icm42607_resume(struct device *dev)
+{
+	struct inv_icm42607_state *st = dev_get_drvdata(dev);
+	int ret;
+
+	ret = inv_icm42607_enable_vddio_reg(st);
+	if (ret)
+		return ret;
+
+	return pm_runtime_force_resume(dev);
+}
+
+static int inv_icm42607_runtime_suspend(struct device *dev)
+{
+	struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+	guard(mutex)(&st->lock);
+
+	/* save sensors state */
+	st->suspended.gyro = st->conf.gyro.mode;
+	st->suspended.accel = st->conf.accel.mode;
+	st->suspended.temp = st->conf.temp_en;
+
+	return inv_icm42607_set_pwr_mgmt0(st, INV_ICM42607_SENSOR_MODE_OFF,
+					  INV_ICM42607_SENSOR_MODE_OFF, false,
+					  NULL);
+}
+
+static int inv_icm42607_runtime_resume(struct device *dev)
+{
+	struct inv_icm42607_state *st = dev_get_drvdata(dev);
+
+	guard(mutex)(&st->lock);
+
+	/* restore sensors state */
+	return inv_icm42607_set_pwr_mgmt0(st, st->suspended.gyro,
+					  st->suspended.accel,
+					  st->suspended.temp, NULL);
+}
+
+EXPORT_NS_GPL_DEV_PM_OPS(inv_icm42607_pm_ops, IIO_ICM42607) = {
+	SYSTEM_SLEEP_PM_OPS(inv_icm42607_suspend, inv_icm42607_resume)
+	RUNTIME_PM_OPS(inv_icm42607_runtime_suspend,
+		       inv_icm42607_runtime_resume, NULL)
+};
+
 MODULE_AUTHOR("InvenSense, Inc.");
 MODULE_DESCRIPTION("InvenSense ICM-42607x device driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
index 22ac51108cd3b..cd08bb9514f2d 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_i2c.c
@@ -82,6 +82,7 @@ static struct i2c_driver inv_icm42607_driver = {
 	.driver = {
 		.name = "inv-icm42607-i2c",
 		.of_match_table = inv_icm42607_of_matches,
+		.pm = pm_ptr(&inv_icm42607_pm_ops),
 	},
 	.id_table = inv_icm42607_id,
 	.probe = inv_icm42607_probe,
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
index 421d3ec1cded3..8a82e1610531b 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_spi.c
@@ -94,6 +94,7 @@ static struct spi_driver inv_icm42607_driver = {
 	.driver = {
 		.name = "inv-icm42607-spi",
 		.of_match_table = inv_icm42607_of_matches,
+		.pm = pm_ptr(&inv_icm42607_pm_ops),
 	},
 	.id_table = inv_icm42607_spi_id_table,
 	.probe = inv_icm42607_probe,
-- 
2.43.0

[PATCH V10 6/9] iio: imu: inv_icm42607: Add Temp Support in icm42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add functions for reading temperature sensor data.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/Makefile         |  1 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |  5 ++
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  | 18 ++++
 .../iio/imu/inv_icm42607/inv_icm42607_temp.c  | 82 +++++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_temp.h  | 33 ++++++++
 5 files changed, 139 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h

diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index be109102e2035..c04953ed42ce9 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_temp.o
 
 obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
 inv-icm42607-i2c-y += inv_icm42607_i2c.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 72327381b6dbc..13a5b06e80142 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -120,6 +120,7 @@ struct inv_icm42607_suspended {
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
  *  @suspended:		suspended sensors configuration.
+ *  @buffer:		data transfer buffer aligned for DMA.
  */
 struct inv_icm42607_state {
 	struct mutex lock;
@@ -130,6 +131,7 @@ struct inv_icm42607_state {
 	struct iio_mount_matrix orientation;
 	struct inv_icm42607_conf conf;
 	struct inv_icm42607_suspended suspended;
+	__be16 buffer[3] __aligned(IIO_DMA_MINALIGN);
 };
 
 /* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
@@ -361,6 +363,9 @@ extern const struct inv_icm42607_hw inv_icm42607_hw_data;
 extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
 extern const struct dev_pm_ops inv_icm42607_pm_ops;
 
+int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
+			       unsigned int *sleep_ms);
+
 int inv_icm42607_core_probe(struct regmap *regmap,
 			    const struct inv_icm42607_hw *hw,
 			    inv_icm42607_bus_setup bus_setup);
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 39620da92bd43..a438e6fbe508b 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -118,6 +118,24 @@ static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
 	return 0;
 }
 
+int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
+			       unsigned int *sleep_ms)
+{
+	unsigned int val;
+	int ret;
+
+	val = FIELD_PREP(INV_ICM42607_TEMP_CONFIG0_FILTER_MASK,
+			 INV_ICM42607_FILTER_BW_34HZ);
+	ret = regmap_update_bits(st->map, INV_ICM42607_REG_TEMP_CONFIG0,
+				 INV_ICM42607_TEMP_CONFIG0_FILTER_MASK, val);
+	if (ret)
+		return ret;
+
+	return inv_icm42607_set_pwr_mgmt0(st, st->conf.gyro.mode,
+					  st->conf.accel.mode, enable,
+					  sleep_ms);
+}
+
 static int inv_icm42607_set_conf(struct inv_icm42607_state *st,
 				 const struct inv_icm42607_conf *conf)
 {
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
new file mode 100644
index 0000000000000..55260082a19ed
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+static int inv_icm42607_temp_read(struct inv_icm42607_state *st, s16 *temp)
+{
+	struct device *dev = regmap_get_device(st->map);
+	__be16 *raw;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_icm42607_set_temp_conf(st, true, NULL);
+	if (ret)
+		return ret;
+
+	raw = &st->buffer[0];
+	ret = regmap_bulk_read(st->map, INV_ICM42607_REG_TEMP_DATA1,
+			       raw, sizeof(*raw));
+	if (ret)
+		return ret;
+
+	*temp = be16_to_cpup(raw);
+	if (*temp == INV_ICM42607_DATA_INVALID)
+		return -EINVAL;
+
+	return 0;
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	s16 temp;
+	int ret;
+
+	if (chan->type != IIO_TEMP)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_temp_read(st, &temp);
+		iio_device_release_direct(indio_dev);
+		if (ret)
+			return ret;
+		*val = temp;
+		return IIO_VAL_INT;
+	/*
+	 * T°C = (temp / 128) + 25
+	 * Tm°C = 1000 * ((temp * 100 / 12800) + 25)
+	 * scale: 100000 / 12800 ~= 7.8125
+	 * offset: 3200
+	 */
+	case IIO_CHAN_INFO_SCALE:
+		*val = 7;
+		*val2 = 812500000;
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 3200;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
new file mode 100644
index 0000000000000..e03924e308662
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#ifndef INV_ICM42607_TEMP_H_
+#define INV_ICM42607_TEMP_H_
+
+#include <linux/bitops.h>
+
+struct iio_dev;
+struct iio_chan_spec;
+
+#define INV_ICM42607_TEMP_CHAN(_index)				\
+{								\
+	.type = IIO_TEMP,					\
+	.info_mask_separate =					\
+		BIT(IIO_CHAN_INFO_RAW) |			\
+		BIT(IIO_CHAN_INFO_OFFSET) |			\
+		BIT(IIO_CHAN_INFO_SCALE),			\
+	.scan_index = _index,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+	},							\
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask);
+
+#endif
-- 
2.43.0

[PATCH V10 7/9] iio: imu: inv_icm42607: Add Accelerometer for icm42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add icm42607 accelerometer sensor for icm42607.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/Makefile         |   1 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |  40 ++
 .../iio/imu/inv_icm42607/inv_icm42607_accel.c | 465 ++++++++++++++++++
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  |  93 ++++
 4 files changed, 599 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c

diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index c04953ed42ce9..d74b23b1e1bec 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_accel.o
 inv-icm42607-y += inv_icm42607_temp.o
 
 obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index 13a5b06e80142..fb4bcc2b7da54 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -14,6 +14,8 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/iio/common/inv_sensors_timestamp.h>
+
 /*
  * Serial bus slew rates. Rates are expressed as range between the two
  * values with the midpoint as the typical rate. For the final value of
@@ -85,12 +87,24 @@ enum inv_icm42607_filter_bw {
 	INV_ICM42607_FILTER_BW_NB
 };
 
+enum inv_icm42607_filter_avg {
+	/* Low-Power mode sensor data filter (averaging) */
+	INV_ICM42607_FILTER_AVG_2X = 0,
+	INV_ICM42607_FILTER_AVG_4X,
+	INV_ICM42607_FILTER_AVG_8X,
+	INV_ICM42607_FILTER_AVG_16X,
+	INV_ICM42607_FILTER_AVG_32X,
+	INV_ICM42607_FILTER_AVG_64X,
+	/* values 7 and 8 also correspond to 64x. */
+};
+
 struct inv_icm42607_sensor_conf {
 	int mode;
 	int fs;
 	int odr;
 	int filter;
 };
+#define INV_ICM42607_SENSOR_CONF_INIT		{ -1, -1, -1, -1 }
 
 struct inv_icm42607_conf {
 	struct inv_icm42607_sensor_conf gyro;
@@ -120,6 +134,7 @@ struct inv_icm42607_suspended {
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
  *  @suspended:		suspended sensors configuration.
+ *  @indio_accel:	accelerometer IIO device.
  *  @buffer:		data transfer buffer aligned for DMA.
  */
 struct inv_icm42607_state {
@@ -131,9 +146,22 @@ struct inv_icm42607_state {
 	struct iio_mount_matrix orientation;
 	struct inv_icm42607_conf conf;
 	struct inv_icm42607_suspended suspended;
+	struct iio_dev *indio_accel;
 	__be16 buffer[3] __aligned(IIO_DMA_MINALIGN);
 };
 
+/**
+ * struct inv_icm42607_sensor_state - sensor state variables
+ * @power_mode:		sensor requested power mode (for common frequencies)
+ * @filter:		sensor filter.
+ * @ts:			timestamp module states.
+ */
+struct inv_icm42607_sensor_state {
+	enum inv_icm42607_sensor_mode power_mode;
+	int filter;
+	struct inv_sensors_timestamp ts;
+};
+
 /* Virtual register addresses: @bank on MSB (4 upper bits), @address on LSB */
 
 /* Register Map for User Bank 0 */
@@ -363,6 +391,16 @@ extern const struct inv_icm42607_hw inv_icm42607_hw_data;
 extern const struct inv_icm42607_hw inv_icm42607p_hw_data;
 extern const struct dev_pm_ops inv_icm42607_pm_ops;
 
+u32 inv_icm42607_odr_to_period(enum inv_icm42607_odr odr);
+
+const struct iio_mount_matrix *
+inv_icm42607_get_mount_matrix(struct iio_dev *indio_dev,
+			      const struct iio_chan_spec *chan);
+
+int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
+				struct inv_icm42607_sensor_conf *conf,
+				unsigned int *sleep_ms);
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms);
 
@@ -370,4 +408,6 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 			    const struct inv_icm42607_hw *hw,
 			    inv_icm42607_bus_setup bus_setup);
 
+struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st);
+
 #endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c
new file mode 100644
index 0000000000000..6c1f88688c3f4
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/minmax.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/units.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+#define INV_ICM42607_ACCEL_CHAN(_modifier, _index, _ext_info)		\
+{									\
+	.type = IIO_ACCEL,						\
+	.modified = 1,							\
+	.channel2 = _modifier,						\
+	.info_mask_separate =						\
+		BIT(IIO_CHAN_INFO_RAW),					\
+	.info_mask_shared_by_type =					\
+		BIT(IIO_CHAN_INFO_SCALE),				\
+	.info_mask_shared_by_type_available =				\
+		BIT(IIO_CHAN_INFO_SCALE),				\
+	.info_mask_shared_by_all =					\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
+	.info_mask_shared_by_all_available =				\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
+	.scan_index = _index,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_BE,					\
+	},								\
+	.ext_info = _ext_info,						\
+}
+
+#define INV_ICM42607_ACCEL_EVENT_CHAN(_modifier, _events, _events_nb)	\
+	{								\
+		.type = IIO_ACCEL,					\
+		.modified = 1,						\
+		.channel2 = _modifier,					\
+		.event_spec = _events,					\
+		.num_event_specs = _events_nb,				\
+		.scan_index = -1,					\
+	}
+
+enum inv_icm42607_accel_scan {
+	INV_ICM42607_ACCEL_SCAN_X,
+	INV_ICM42607_ACCEL_SCAN_Y,
+	INV_ICM42607_ACCEL_SCAN_Z,
+	INV_ICM42607_ACCEL_SCAN_TEMP,
+	INV_ICM42607_ACCEL_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42607_accel_ext_infos[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42607_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec inv_icm42607_accel_channels[] = {
+	INV_ICM42607_ACCEL_CHAN(IIO_MOD_X, INV_ICM42607_ACCEL_SCAN_X,
+				inv_icm42607_accel_ext_infos),
+	INV_ICM42607_ACCEL_CHAN(IIO_MOD_Y, INV_ICM42607_ACCEL_SCAN_Y,
+				inv_icm42607_accel_ext_infos),
+	INV_ICM42607_ACCEL_CHAN(IIO_MOD_Z, INV_ICM42607_ACCEL_SCAN_Z,
+				inv_icm42607_accel_ext_infos),
+	INV_ICM42607_TEMP_CHAN(INV_ICM42607_ACCEL_SCAN_TEMP),
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42607_ACCEL_SCAN_TIMESTAMP),
+};
+
+#define INV_ICM42607_SCAN_MASK_ACCEL_3AXIS				\
+	(BIT(INV_ICM42607_ACCEL_SCAN_X) |				\
+	 BIT(INV_ICM42607_ACCEL_SCAN_Y) |				\
+	 BIT(INV_ICM42607_ACCEL_SCAN_Z))
+
+#define INV_ICM42607_SCAN_MASK_TEMP	BIT(INV_ICM42607_ACCEL_SCAN_TEMP)
+
+static const unsigned long inv_icm42607_accel_scan_masks[] = {
+	INV_ICM42607_SCAN_MASK_ACCEL_3AXIS,
+	INV_ICM42607_SCAN_MASK_ACCEL_3AXIS | INV_ICM42607_SCAN_MASK_TEMP,
+	0
+};
+
+/* enable accelerometer sensor */
+static int inv_icm42607_accel_update_scan_mode(struct iio_dev *indio_dev,
+					       const unsigned long *scan_mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *accel_st = iio_priv(indio_dev);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int sleep_temp = 0;
+	unsigned int sleep_accel = 0;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_TEMP) {
+		/* enable temp sensor */
+		ret = inv_icm42607_set_temp_conf(st, true, &sleep_temp);
+		if (ret)
+			goto out_unlock;
+	}
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_ACCEL_3AXIS) {
+		/* enable accel sensor */
+		conf.mode = accel_st->power_mode;
+		conf.filter = accel_st->filter;
+		ret = inv_icm42607_set_accel_conf(st, &conf, &sleep_accel);
+		if (ret)
+			goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	/*
+	 * Choose the highest enable-delay time of the two sensors being
+	 * enabled, and sleep for that amount of time.
+	 */
+	msleep(max(sleep_accel, sleep_temp));
+
+	return ret;
+}
+
+static int inv_icm42607_accel_read_sensor(struct iio_dev *indio_dev,
+					  struct iio_chan_spec const *chan,
+					  s16 *val)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *accel_st = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int reg;
+	__be16 *data;
+	int ret;
+
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42607_REG_ACCEL_DATA_X1;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42607_REG_ACCEL_DATA_Y1;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42607_REG_ACCEL_DATA_Z1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	/* enable accel sensor */
+	conf.mode = accel_st->power_mode;
+	conf.filter = accel_st->filter;
+	ret = inv_icm42607_set_accel_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	/* read accel register data */
+	data = &st->buffer[0];
+	ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpup(data);
+	if (*val == INV_ICM42607_DATA_INVALID)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const int inv_icm42607_accel_scale_nano[][2] = {
+	[INV_ICM42607_ACCEL_FS_16G] = { 0, 4788403 },
+	[INV_ICM42607_ACCEL_FS_8G] = { 0, 2394202 },
+	[INV_ICM42607_ACCEL_FS_4G] = { 0, 1197101 },
+	[INV_ICM42607_ACCEL_FS_2G] = { 0, 598550 }
+};
+
+static int inv_icm42607_accel_read_scale(struct iio_dev *indio_dev,
+					 int *val, int *val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	unsigned int idx;
+
+	idx = st->conf.accel.fs;
+
+	*val = inv_icm42607_accel_scale_nano[idx][0];
+	*val2 = inv_icm42607_accel_scale_nano[idx][1];
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42607_accel_write_scale(struct iio_dev *indio_dev,
+					  int val, int val2)
+{
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	size_t scales_len = ARRAY_SIZE(inv_icm42607_accel_scale_nano);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	int ret;
+
+	for (idx = 0; idx < scales_len; idx++) {
+		if (val == inv_icm42607_accel_scale_nano[idx][0] &&
+		    val2 == inv_icm42607_accel_scale_nano[idx][1])
+			break;
+	}
+	if (idx >= scales_len)
+		return -EINVAL;
+
+	conf.fs = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	return inv_icm42607_set_accel_conf(st, &conf, NULL);
+}
+
+/* IIO format int + micro , values 0-5 reserved. */
+static const int inv_icm42607_accel_odr[][2] = {
+	[INV_ICM42607_ODR_1_5625HZ_LP] = { 1, 562500 },
+	[INV_ICM42607_ODR_3_125HZ_LP] = { 3, 125000 },
+	[INV_ICM42607_ODR_6_25HZ_LP] = { 6, 250000 },
+	[INV_ICM42607_ODR_12_5HZ] = { 12, 500000 },
+	[INV_ICM42607_ODR_25HZ] = { 25, 0 },
+	[INV_ICM42607_ODR_50HZ] = { 50, 0 },
+	[INV_ICM42607_ODR_100HZ] = { 100, 0 },
+	[INV_ICM42607_ODR_200HZ] = { 200, 0 },
+	[INV_ICM42607_ODR_400HZ] = { 400, 0 },
+	[INV_ICM42607_ODR_800HZ] = { 800, 0 },
+	[INV_ICM42607_ODR_1600HZ] = { 1600, 0 }
+};
+
+static int inv_icm42607_accel_read_odr(struct inv_icm42607_state *st,
+				       int *val, int *val2)
+{
+	unsigned int odr;
+	unsigned int i;
+
+	odr = st->conf.accel.odr;
+
+	for (i = 5; i < ARRAY_SIZE(inv_icm42607_accel_odr); ++i) {
+		if (i == odr)
+			break;
+	}
+	if (i >= ARRAY_SIZE(inv_icm42607_accel_odr))
+		return -EINVAL;
+
+	*val = inv_icm42607_accel_odr[i][0];
+	*val2 = inv_icm42607_accel_odr[i][1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42607_accel_write_odr(struct iio_dev *indio_dev,
+					int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *accel_st = iio_priv(indio_dev);
+	struct inv_sensors_timestamp *ts = &accel_st->ts;
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_accel_odr); ++idx) {
+		if (val == inv_icm42607_accel_odr[idx][0] &&
+		    val2 == inv_icm42607_accel_odr[idx][1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42607_accel_odr))
+		return -EINVAL;
+
+	conf.odr = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_sensors_timestamp_update_odr(ts, inv_icm42607_odr_to_period(conf.odr),
+					       iio_buffer_enabled(indio_dev));
+	if (ret)
+		return ret;
+
+	ret = inv_icm42607_set_accel_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int inv_icm42607_accel_read_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int *val, int *val2, long mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	s16 data;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_ACCEL:
+		break;
+	case IIO_TEMP:
+		return inv_icm42607_temp_read_raw(indio_dev, chan, val, val2, mask);
+	default:
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_accel_read_sensor(indio_dev, chan, &data);
+		iio_device_release_direct(indio_dev);
+		if (ret)
+			return ret;
+		*val = data;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return inv_icm42607_accel_read_scale(indio_dev, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_accel_read_odr(st, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_accel_read_avail(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 const int **vals,
+					 int *type, int *length, long mask)
+{
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (const int *)inv_icm42607_accel_scale_nano;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*length = ARRAY_SIZE(inv_icm42607_accel_scale_nano) * 2;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (const int *)inv_icm42607_accel_odr[5];
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = (ARRAY_SIZE(inv_icm42607_accel_odr) - 5) * 2;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_accel_write_raw(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					int val, int val2, long mask)
+{
+	int ret;
+
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_accel_write_scale(indio_dev, val, val2);
+		iio_device_release_direct(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_accel_write_odr(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_accel_write_raw_get_fmt(struct iio_dev *indio_dev,
+						struct iio_chan_spec const *chan,
+						long mask)
+{
+	if (chan->type != IIO_ACCEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info inv_icm42607_accel_info = {
+	.read_raw = inv_icm42607_accel_read_raw,
+	.read_avail = inv_icm42607_accel_read_avail,
+	.write_raw = inv_icm42607_accel_write_raw,
+	.write_raw_get_fmt = inv_icm42607_accel_write_raw_get_fmt,
+	.update_scan_mode = inv_icm42607_accel_update_scan_mode,
+};
+
+struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *name;
+	struct inv_icm42607_sensor_state *accel_st;
+	struct inv_sensors_timestamp_chip ts_chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s-accel", st->hw->name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*accel_st));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+	accel_st = iio_priv(indio_dev);
+
+	accel_st->power_mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+	accel_st->filter = INV_ICM42607_FILTER_AVG_16X;
+
+	/*
+	 * clock period is 32kHz (31250ns)
+	 * jitter is +/- 2% (20 per mille)
+	 */
+	ts_chip.clock_period = 31250;
+	ts_chip.jitter = 20;
+	ts_chip.init_period = inv_icm42607_odr_to_period(st->conf.accel.odr);
+	inv_sensors_timestamp_init(&accel_st->ts, &ts_chip);
+
+	iio_device_set_drvdata(indio_dev, st);
+	indio_dev->name = name;
+	indio_dev->info = &inv_icm42607_accel_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = inv_icm42607_accel_channels;
+	indio_dev->num_channels = ARRAY_SIZE(inv_icm42607_accel_channels);
+	indio_dev->available_scan_masks = inv_icm42607_accel_scan_masks;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return indio_dev;
+}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index a438e6fbe508b..5f311cba0572c 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -73,6 +73,47 @@ const struct inv_icm42607_hw inv_icm42607p_hw_data = {
 };
 EXPORT_SYMBOL_NS_GPL(inv_icm42607p_hw_data, "IIO_ICM42607");
 
+u32 inv_icm42607_odr_to_period(enum inv_icm42607_odr odr)
+{
+	static const u32 odr_periods[INV_ICM42607_ODR_NB] = {
+		/* 1600Hz */
+		[INV_ICM42607_ODR_1600HZ] = 625000,
+		/* 800Hz */
+		1250000,
+		/* 400Hz */
+		2500000,
+		/* 200Hz */
+		5000000,
+		/* 100 Hz */
+		10000000,
+		/* 50Hz */
+		20000000,
+		/* 25Hz */
+		40000000,
+		/* 12.5Hz */
+		80000000,
+		/* 6.25Hz */
+		160000000,
+		/* 3.125Hz */
+		320000000,
+		/* 1.5625Hz */
+		640000000,
+	};
+
+	odr = clamp(odr, INV_ICM42607_ODR_1600HZ, INV_ICM42607_ODR_1_5625HZ_LP);
+
+	return odr_periods[odr];
+}
+
+const struct iio_mount_matrix *
+inv_icm42607_get_mount_matrix(struct iio_dev *indio_dev,
+			      const struct iio_chan_spec *chan)
+{
+	const struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+
+	return &st->orientation;
+}
+
 static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
 				      enum inv_icm42607_sensor_mode gyro,
 				      enum inv_icm42607_sensor_mode accel,
@@ -118,6 +159,53 @@ static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
 	return 0;
 }
 
+int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
+				struct inv_icm42607_sensor_conf *conf,
+				unsigned int *sleep_ms)
+{
+	struct inv_icm42607_sensor_conf *oldconf = &st->conf.accel;
+	unsigned int val;
+	int ret;
+
+	if (conf->mode < 0)
+		conf->mode = oldconf->mode;
+	if (conf->fs < 0)
+		conf->fs = oldconf->fs;
+	if (conf->odr < 0)
+		conf->odr = oldconf->odr;
+	if (conf->filter < 0)
+		conf->filter = oldconf->filter;
+
+	if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+		val = FIELD_PREP(INV_ICM42607_ACCEL_CONFIG0_FS_SEL_MASK, conf->fs);
+		val |= FIELD_PREP(INV_ICM42607_ACCEL_CONFIG0_ODR_MASK, conf->odr);
+		ret = regmap_write(st->map, INV_ICM42607_REG_ACCEL_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->fs = conf->fs;
+		oldconf->odr = conf->odr;
+	}
+
+	if (conf->filter != oldconf->filter) {
+		if (conf->mode == INV_ICM42607_SENSOR_MODE_LOW_POWER) {
+			val = FIELD_PREP(INV_ICM42607_ACCEL_CONFIG1_AVG_MASK, conf->filter);
+			ret = regmap_update_bits(st->map, INV_ICM42607_REG_ACCEL_CONFIG1,
+						 INV_ICM42607_ACCEL_CONFIG1_AVG_MASK, val);
+		} else {
+			val = FIELD_PREP(INV_ICM42607_ACCEL_CONFIG1_FILTER_MASK,
+					 conf->filter);
+			ret = regmap_update_bits(st->map, INV_ICM42607_REG_ACCEL_CONFIG1,
+						 INV_ICM42607_ACCEL_CONFIG1_FILTER_MASK, val);
+		}
+		if (ret)
+			return ret;
+		oldconf->filter = conf->filter;
+	}
+
+	return inv_icm42607_set_pwr_mgmt0(st, st->conf.gyro.mode, conf->mode,
+					  st->conf.temp_en, sleep_ms);
+}
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms)
 {
@@ -328,6 +416,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 	pm_runtime_set_autosuspend_delay(dev, INV_ICM42607_SUSPEND_DELAY_MS);
 	pm_runtime_use_autosuspend(dev);
 
+	/* Initialize IIO device for Accel */
+	st->indio_accel = inv_icm42607_accel_init(st);
+	if (IS_ERR(st->indio_accel))
+		return PTR_ERR(st->indio_accel);
+
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
-- 
2.43.0

[PATCH V10 8/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add gyroscope functions to the icm42607 driver.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 drivers/iio/imu/inv_icm42607/Makefile         |   1 +
 drivers/iio/imu/inv_icm42607/inv_icm42607.h   |   8 +
 .../iio/imu/inv_icm42607/inv_icm42607_core.c  |  48 ++
 .../iio/imu/inv_icm42607/inv_icm42607_gyro.c  | 437 ++++++++++++++++++
 4 files changed, 494 insertions(+)
 create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c

diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index d74b23b1e1bec..7b907e0196017 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -2,6 +2,7 @@
 
 obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
 inv-icm42607-y += inv_icm42607_core.o
+inv-icm42607-y += inv_icm42607_gyro.o
 inv-icm42607-y += inv_icm42607_accel.o
 inv-icm42607-y += inv_icm42607_temp.o
 
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index fb4bcc2b7da54..b2f081ec8776c 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -134,6 +134,7 @@ struct inv_icm42607_suspended {
  *  @orientation:	sensor chip orientation relative to main hardware.
  *  @conf:		chip sensors configurations.
  *  @suspended:		suspended sensors configuration.
+ *  @indio_gyro:	gyroscope IIO device.
  *  @indio_accel:	accelerometer IIO device.
  *  @buffer:		data transfer buffer aligned for DMA.
  */
@@ -146,6 +147,7 @@ struct inv_icm42607_state {
 	struct iio_mount_matrix orientation;
 	struct inv_icm42607_conf conf;
 	struct inv_icm42607_suspended suspended;
+	struct iio_dev *indio_gyro;
 	struct iio_dev *indio_accel;
 	__be16 buffer[3] __aligned(IIO_DMA_MINALIGN);
 };
@@ -401,6 +403,10 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
 				struct inv_icm42607_sensor_conf *conf,
 				unsigned int *sleep_ms);
 
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+			       struct inv_icm42607_sensor_conf *conf,
+			       unsigned int *sleep_ms);
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms);
 
@@ -408,6 +414,8 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 			    const struct inv_icm42607_hw *hw,
 			    inv_icm42607_bus_setup bus_setup);
 
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st);
+
 struct iio_dev *inv_icm42607_accel_init(struct inv_icm42607_state *st);
 
 #endif
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 5f311cba0572c..fd06ef5ab1e6f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -206,6 +206,49 @@ int inv_icm42607_set_accel_conf(struct inv_icm42607_state *st,
 					  st->conf.temp_en, sleep_ms);
 }
 
+int inv_icm42607_set_gyro_conf(struct inv_icm42607_state *st,
+			       struct inv_icm42607_sensor_conf *conf,
+			       unsigned int *sleep_ms)
+{
+	struct inv_icm42607_sensor_conf *oldconf = &st->conf.gyro;
+	unsigned int val;
+	int ret;
+
+	if (conf->mode < 0)
+		conf->mode = oldconf->mode;
+	if (conf->fs < 0)
+		conf->fs = oldconf->fs;
+	if (conf->odr < 0)
+		conf->odr = oldconf->odr;
+	if (conf->filter < 0)
+		conf->filter = oldconf->filter;
+
+	if (conf->fs != oldconf->fs || conf->odr != oldconf->odr) {
+		val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_FS_SEL_MASK,
+				 conf->fs);
+		val |= FIELD_PREP(INV_ICM42607_GYRO_CONFIG0_ODR_MASK,
+				  conf->odr);
+		ret = regmap_write(st->map, INV_ICM42607_REG_GYRO_CONFIG0, val);
+		if (ret)
+			return ret;
+		oldconf->fs = conf->fs;
+		oldconf->odr = conf->odr;
+	}
+
+	if (conf->filter != oldconf->filter) {
+		val = FIELD_PREP(INV_ICM42607_GYRO_CONFIG1_FILTER_MASK,
+				 conf->filter);
+		ret = regmap_update_bits(st->map, INV_ICM42607_REG_GYRO_CONFIG1,
+					 INV_ICM42607_GYRO_CONFIG1_FILTER_MASK, val);
+		if (ret)
+			return ret;
+		oldconf->filter = conf->filter;
+	}
+
+	return inv_icm42607_set_pwr_mgmt0(st, conf->mode, st->conf.accel.mode,
+					  st->conf.temp_en, sleep_ms);
+}
+
 int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
 			       unsigned int *sleep_ms)
 {
@@ -421,6 +464,11 @@ int inv_icm42607_core_probe(struct regmap *regmap,
 	if (IS_ERR(st->indio_accel))
 		return PTR_ERR(st->indio_accel);
 
+	/* Initialize IIO device for Gyro */
+	st->indio_gyro = inv_icm42607_gyro_init(st);
+	if (IS_ERR(st->indio_gyro))
+		return PTR_ERR(st->indio_gyro);
+
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(inv_icm42607_core_probe, "IIO_ICM42607");
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
new file mode 100644
index 0000000000000..0f2703342122b
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/common/inv_sensors_timestamp.h>
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+#define INV_ICM42607_GYRO_CHAN(_modifier, _index, _ext_info)	\
+{								\
+	.type = IIO_ANGL_VEL,					\
+	.modified = 1,						\
+	.channel2 = _modifier,					\
+	.info_mask_separate =					\
+		BIT(IIO_CHAN_INFO_RAW),				\
+	.info_mask_shared_by_type =				\
+		BIT(IIO_CHAN_INFO_SCALE),			\
+	.info_mask_shared_by_all =				\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+	.scan_index = _index,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 16,					\
+		.storagebits = 16,				\
+		.endianness = IIO_BE,				\
+	},							\
+	.ext_info = _ext_info,					\
+}
+
+enum inv_icm42607_gyro_scan {
+	INV_ICM42607_GYRO_SCAN_X,
+	INV_ICM42607_GYRO_SCAN_Y,
+	INV_ICM42607_GYRO_SCAN_Z,
+	INV_ICM42607_GYRO_SCAN_TEMP,
+	INV_ICM42607_GYRO_SCAN_TIMESTAMP,
+};
+
+static const struct iio_chan_spec_ext_info inv_icm42607_gyro_ext_infos[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, inv_icm42607_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec inv_icm42607_gyro_channels[] = {
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_X, INV_ICM42607_GYRO_SCAN_X,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_Y, INV_ICM42607_GYRO_SCAN_Y,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_GYRO_CHAN(IIO_MOD_Z, INV_ICM42607_GYRO_SCAN_Z,
+			       inv_icm42607_gyro_ext_infos),
+	INV_ICM42607_TEMP_CHAN(INV_ICM42607_GYRO_SCAN_TEMP),
+	IIO_CHAN_SOFT_TIMESTAMP(INV_ICM42607_GYRO_SCAN_TIMESTAMP),
+};
+
+#define INV_ICM42607_SCAN_MASK_GYRO_3AXIS				\
+	(BIT(INV_ICM42607_GYRO_SCAN_X) |				\
+	 BIT(INV_ICM42607_GYRO_SCAN_Y) |				\
+	 BIT(INV_ICM42607_GYRO_SCAN_Z))
+
+#define INV_ICM42607_SCAN_MASK_TEMP	BIT(INV_ICM42607_GYRO_SCAN_TEMP)
+
+static const unsigned long inv_icm42607_gyro_scan_masks[] = {
+	INV_ICM42607_SCAN_MASK_GYRO_3AXIS,
+	INV_ICM42607_SCAN_MASK_GYRO_3AXIS | INV_ICM42607_SCAN_MASK_TEMP,
+	0
+};
+
+/* enable gyroscope sensor */
+static int inv_icm42607_gyro_update_scan_mode(struct iio_dev *indio_dev,
+					      const unsigned long *scan_mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int sleep_gyro = 0;
+	unsigned int sleep_temp = 0;
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_TEMP) {
+		/* enable temp sensor */
+		ret = inv_icm42607_set_temp_conf(st, true, &sleep_temp);
+		if (ret)
+			goto out_unlock;
+	}
+
+	if (*scan_mask & INV_ICM42607_SCAN_MASK_GYRO_3AXIS) {
+		/* enable gyro sensor */
+		conf.mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+		ret = inv_icm42607_set_gyro_conf(st, &conf, &sleep_gyro);
+		if (ret)
+			goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	/* sleep maximum required time */
+	msleep(max(sleep_gyro, sleep_temp));
+	return ret;
+}
+
+static int inv_icm42607_gyro_read_sensor(struct iio_dev *indio_dev,
+					 struct iio_chan_spec const *chan,
+					 s16 *val)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	unsigned int reg;
+	__be16 *data;
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (chan->channel2) {
+	case IIO_MOD_X:
+		reg = INV_ICM42607_REG_GYRO_DATA_X1;
+		break;
+	case IIO_MOD_Y:
+		reg = INV_ICM42607_REG_GYRO_DATA_Y1;
+		break;
+	case IIO_MOD_Z:
+		reg = INV_ICM42607_REG_GYRO_DATA_Z1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	/* enable gyro sensor */
+	conf.mode = gyro_st->power_mode;
+	ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	/* read gyro register data */
+	data = &st->buffer[0];
+	ret = regmap_bulk_read(st->map, reg, data, sizeof(*data));
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpup(data);
+	if (*val == INV_ICM42607_DATA_INVALID)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const int inv_icm42607_gyro_scale_nano[][2] = {
+	[INV_ICM42607_GYRO_FS_2000DPS] = { 0, 1065264 },
+	[INV_ICM42607_GYRO_FS_1000DPS] = { 0, 532632 },
+	[INV_ICM42607_GYRO_FS_500DPS] = { 0, 266316 },
+	[INV_ICM42607_GYRO_FS_250DPS] = { 0, 133158 },
+};
+
+static int inv_icm42607_gyro_read_scale(struct iio_dev *indio_dev,
+					int *val, int *val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	unsigned int idx;
+
+	idx = st->conf.gyro.fs;
+
+	*val = inv_icm42607_gyro_scale_nano[idx][0];
+	*val2 = inv_icm42607_gyro_scale_nano[idx][1];
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int inv_icm42607_gyro_write_scale(struct iio_dev *indio_dev,
+					 int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	size_t scales_len = ARRAY_SIZE(inv_icm42607_gyro_scale_nano);
+	int ret;
+
+	for (idx = 0; idx < scales_len; idx++) {
+		if (val == inv_icm42607_gyro_scale_nano[idx][0] &&
+		    val2 == inv_icm42607_gyro_scale_nano[idx][1])
+			break;
+	}
+	if (idx >= scales_len)
+		return -EINVAL;
+
+	conf.fs = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	return inv_icm42607_set_gyro_conf(st, &conf, NULL);
+}
+
+static const int inv_icm42607_gyro_odr[][2] = {
+	[INV_ICM42607_ODR_12_5HZ] = { 12, 500000 },
+	[INV_ICM42607_ODR_25HZ] = { 25, 0 },
+	[INV_ICM42607_ODR_50HZ] = { 50, 0 },
+	[INV_ICM42607_ODR_100HZ] = { 100, 0 },
+	[INV_ICM42607_ODR_200HZ] = { 200, 0 },
+	[INV_ICM42607_ODR_400HZ] = { 400, 0 },
+	[INV_ICM42607_ODR_800HZ] = { 800, 0 },
+	[INV_ICM42607_ODR_1600HZ] = { 1600, 0 },
+};
+
+static int inv_icm42607_gyro_read_odr(struct inv_icm42607_state *st,
+				      int *val, int *val2)
+{
+	unsigned int odr;
+	unsigned int i;
+
+	odr = st->conf.gyro.odr;
+
+	for (i = 5; i < ARRAY_SIZE(inv_icm42607_gyro_odr); ++i) {
+		if (i == odr)
+			break;
+	}
+	if (i >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+		return -EINVAL;
+
+	*val = inv_icm42607_gyro_odr[i][0];
+	*val2 = inv_icm42607_gyro_odr[i][1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int inv_icm42607_gyro_write_odr(struct iio_dev *indio_dev,
+				       int val, int val2)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	struct inv_icm42607_sensor_state *gyro_st = iio_priv(indio_dev);
+	struct inv_sensors_timestamp *ts = &gyro_st->ts;
+	struct device *dev = regmap_get_device(st->map);
+	unsigned int idx;
+	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+	int ret;
+
+	for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_gyro_odr); ++idx) {
+		if (val == inv_icm42607_gyro_odr[idx][0] &&
+		    val2 == inv_icm42607_gyro_odr[idx][1])
+			break;
+	}
+	if (idx >= ARRAY_SIZE(inv_icm42607_gyro_odr))
+		return -EINVAL;
+
+	conf.odr = idx;
+
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&st->lock);
+
+	ret = inv_sensors_timestamp_update_odr(ts, inv_icm42607_odr_to_period(conf.odr),
+					       iio_buffer_enabled(indio_dev));
+	if (ret)
+		return ret;
+
+	ret = inv_icm42607_set_gyro_conf(st, &conf, NULL);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan,
+				      int *val, int *val2, long mask)
+{
+	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+	s16 data;
+	int ret;
+
+	switch (chan->type) {
+	case IIO_ANGL_VEL:
+		break;
+	case IIO_TEMP:
+		return inv_icm42607_temp_read_raw(indio_dev, chan, val, val2, mask);
+	default:
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_gyro_read_sensor(indio_dev, chan, &data);
+		iio_device_release_direct(indio_dev);
+		if (ret)
+			return ret;
+		*val = data;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return inv_icm42607_gyro_read_scale(indio_dev, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_gyro_read_odr(st, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_read_avail(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					const int **vals,
+					int *type, int *length, long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (const int *)inv_icm42607_gyro_scale_nano;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		*length = ARRAY_SIZE(inv_icm42607_gyro_scale_nano) * 2;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (const int *)inv_icm42607_gyro_odr[5];
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = (ARRAY_SIZE(inv_icm42607_gyro_odr) - 5) * 2;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_write_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int val, int val2, long mask)
+{
+	int ret;
+
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (!iio_device_claim_direct(indio_dev))
+			return -EBUSY;
+		ret = inv_icm42607_gyro_write_scale(indio_dev, val, val2);
+		iio_device_release_direct(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return inv_icm42607_gyro_write_odr(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int inv_icm42607_gyro_write_raw_get_fmt(struct iio_dev *indio_dev,
+					       struct iio_chan_spec const *chan,
+					       long mask)
+{
+	if (chan->type != IIO_ANGL_VEL)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info inv_icm42607_gyro_info = {
+	.read_raw = inv_icm42607_gyro_read_raw,
+	.read_avail = inv_icm42607_gyro_read_avail,
+	.write_raw = inv_icm42607_gyro_write_raw,
+	.write_raw_get_fmt = inv_icm42607_gyro_write_raw_get_fmt,
+	.update_scan_mode = inv_icm42607_gyro_update_scan_mode,
+};
+
+struct iio_dev *inv_icm42607_gyro_init(struct inv_icm42607_state *st)
+{
+	struct device *dev = regmap_get_device(st->map);
+	const char *name;
+	struct inv_icm42607_sensor_state *gyro_st;
+	struct inv_sensors_timestamp_chip ts_chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s-gyro", st->hw->name);
+	if (!name)
+		return ERR_PTR(-ENOMEM);
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*gyro_st));
+	if (!indio_dev)
+		return ERR_PTR(-ENOMEM);
+	gyro_st = iio_priv(indio_dev);
+
+	gyro_st->power_mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+
+	/*
+	 * clock period is 32kHz (31250ns)
+	 * jitter is +/- 2% (20 per mille)
+	 */
+	ts_chip.clock_period = 31250;
+	ts_chip.jitter = 20;
+	ts_chip.init_period = inv_icm42607_odr_to_period(st->conf.gyro.odr);
+	inv_sensors_timestamp_init(&gyro_st->ts, &ts_chip);
+
+	iio_device_set_drvdata(indio_dev, st);
+	indio_dev->name = name;
+	indio_dev->info = &inv_icm42607_gyro_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = inv_icm42607_gyro_channels;
+	indio_dev->num_channels = ARRAY_SIZE(inv_icm42607_gyro_channels);
+	indio_dev->available_scan_masks = inv_icm42607_gyro_scan_masks;
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return indio_dev;
+}
-- 
2.43.0

[PATCH V10 9/9] arm64: dts: rockchip: Add icm42607p IMU for RG-DS

[Chris Morgan]

From: Chris Morgan <macromorgan@hotmail.com>

Add the Invensense ICM42607P IMU for the Anbernic RG-DS. Mount-matrix
was tested with iio-sensor-proxy and reports correct orientation.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts b/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
index 8d906ab02c5fb..b770bfd5268d8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
@@ -871,7 +871,13 @@ aw87391_pa_r: audio-codec@5b {
 		sound-name-prefix = "Right Amp";
 	};
 
-	/* invensense,icm42607p at 0x68 */
+	icm42607p: imu@68 {
+		compatible = "invensense,icm42607p";
+		reg = <0x68>;
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "-1";
+	};
 };
 
 &i2c3 {
-- 
2.43.0

Re: [PATCH V10 2/9] dt-bindings: iio: imu: icm42600: Add icm42607

[Krzysztof Kozlowski]

On Thu, Jun 04, 2026 at 03:18:24PM -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add the ICM42607 and ICM42607P inertial measurement unit.
> 
> This device is functionally very similar to the icm42600 series with a
> very different register layout. The driver does not require an
> interrupt for these specific chip revisions.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>  .../bindings/iio/imu/invensense,icm42600.yaml  | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof