From: Jason Gunthorpe <jgg@ziepe.ca>
To: Jacob Pan <jacob.pan@linux.microsoft.com>
Cc: Vasant Hegde <vasant.hegde@amd.com>,
iommu@lists.linux.dev, joro@8bytes.org, will@kernel.org,
robin.murphy@arm.com, suravee.suthikulpanit@amd.com,
yi.l.liu@intel.com, baolu.lu@linux.intel.com,
kevin.tian@intel.com
Subject: Re: [PATCH v2 5/8] iommu/amd: Pass page table type as param to pdom_setup_pgtable()
Date: Fri, 20 Sep 2024 10:02:11 -0300 [thread overview]
Message-ID: <Zu1yUz6hPFuM49wx@ziepe.ca> (raw)
In-Reply-To: <66e4b125.170a0220.2fa213.1e2cSMTPIN_ADDED_BROKEN@mx.google.com>
On Fri, Sep 13, 2024 at 02:39:45PM -0700, Jacob Pan wrote:
> Hi Vasant,
>
> On Wed, 11 Sep 2024 10:19:08 +0000
> Vasant Hegde <vasant.hegde@amd.com> wrote:
>
> > --- a/drivers/iommu/amd/iommu.c
> > +++ b/drivers/iommu/amd/iommu.c
> > @@ -2285,28 +2285,13 @@ struct protection_domain
> > *protection_domain_alloc(unsigned int type, int nid) }
> >
> > static int pdom_setup_pgtable(struct protection_domain *domain,
> > - unsigned int type)
> > + unsigned int type, int pgtable)
> > {
> > struct io_pgtable_ops *pgtbl_ops;
> > - int pgtable;
> >
> > - switch (type) {
> > /* No need to allocate io pgtable ops in passthrough mode */
> > - case IOMMU_DOMAIN_IDENTITY:
> > + if (!(type & __IOMMU_DOMAIN_PAGING))
> > return 0;
> Now that you pass in the pgtable format explicitly, I think you can
> delete 'type' parameter and move this check to do_iommu_domain_alloc().
> As you mentioned in [4/8], pdom_setup_pgtable() is factored out for
> setting up page table only.
It would be nice but I think the type is stil encoding the DMA API
flag at this point. Adjusting that could be moved to where the cookie
code ended up
Jason
next prev parent reply other threads:[~2024-09-20 13:02 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-11 10:19 [PATCH v2 0/8] iommu: Domain allocation enhancements Vasant Hegde
2024-09-11 10:19 ` [PATCH v2 1/8] iommu: Refactor __iommu_domain_alloc() Vasant Hegde
2024-09-12 1:50 ` Baolu Lu
2024-09-13 4:02 ` Jacob Pan
2024-09-26 10:17 ` Vasant Hegde
2024-09-30 17:55 ` Jacob Pan
2024-10-01 4:31 ` Vasant Hegde
2024-10-02 5:11 ` Jacob Pan
[not found] ` <66fae60d.170a0220.280357.3d11SMTPIN_ADDED_BROKEN@mx.google.com>
2024-10-02 14:19 ` Jason Gunthorpe
2024-10-02 16:16 ` Jacob Pan
2024-10-02 19:09 ` Jason Gunthorpe
2024-10-15 8:12 ` Tian, Kevin
2024-09-11 10:19 ` [PATCH v2 2/8] iommu: Introduce iommu_paging_domain_alloc_flags() Vasant Hegde
2024-09-12 4:04 ` Baolu Lu
2024-09-26 10:43 ` Vasant Hegde
2024-10-15 8:24 ` Tian, Kevin
2024-10-15 12:31 ` Jason Gunthorpe
2024-10-16 2:44 ` Tian, Kevin
2024-10-02 19:12 ` Jason Gunthorpe
2024-10-09 21:14 ` Jacob Pan
2024-10-16 10:14 ` Vasant Hegde
2024-09-11 10:19 ` [PATCH v2 3/8] iommu: Add new flag to explictly request PASID capable domain Vasant Hegde
2024-09-12 4:14 ` Baolu Lu
2024-09-26 10:29 ` Vasant Hegde
2024-09-26 11:01 ` Vasant Hegde
2024-10-02 14:23 ` Jason Gunthorpe
2024-10-02 19:02 ` Jacob Pan
[not found] ` <66fd98e3.170a0220.23d7ae.c2a9SMTPIN_ADDED_BROKEN@mx.google.com>
2024-10-02 19:07 ` Jason Gunthorpe
2024-10-03 16:00 ` Jacob Pan
2024-10-02 19:23 ` Jason Gunthorpe
2024-10-04 8:12 ` Vasant Hegde
2024-10-04 12:46 ` Jason Gunthorpe
2024-10-15 8:31 ` Tian, Kevin
2024-09-11 10:19 ` [PATCH v2 4/8] iommu/amd: Separate page table setup from domain allocation Vasant Hegde
2024-09-13 17:08 ` Jacob Pan
2024-10-02 19:24 ` Jason Gunthorpe
2024-09-11 10:19 ` [PATCH v2 5/8] iommu/amd: Pass page table type as param to pdom_setup_pgtable() Vasant Hegde
2024-09-13 21:39 ` Jacob Pan
2024-09-26 10:25 ` Vasant Hegde
2024-09-30 17:57 ` Jacob Pan
[not found] ` <66e4b125.170a0220.2fa213.1e2cSMTPIN_ADDED_BROKEN@mx.google.com>
2024-09-20 13:02 ` Jason Gunthorpe [this message]
2024-09-11 10:19 ` [PATCH v2 6/8] iommu/amd: Enhance domain_alloc_user() to allocate PASID capable domain Vasant Hegde
2024-10-02 19:31 ` Jason Gunthorpe
2024-10-04 8:18 ` Vasant Hegde
2024-10-04 12:48 ` Jason Gunthorpe
2024-10-04 14:32 ` Vasant Hegde
2024-10-15 8:41 ` Tian, Kevin
2024-10-15 12:40 ` Jason Gunthorpe
2024-10-16 2:48 ` Tian, Kevin
2024-10-16 15:28 ` Jason Gunthorpe
2024-10-17 6:11 ` Tian, Kevin
2024-10-17 11:03 ` Vasant Hegde
2024-09-11 10:19 ` [PATCH v2 7/8] iommu/amd: Add iommu_ops->domain_alloc_paging support Vasant Hegde
2024-10-02 19:33 ` Jason Gunthorpe
2024-10-04 11:55 ` Vasant Hegde
2024-10-04 12:56 ` Jason Gunthorpe
2024-10-04 14:30 ` Vasant Hegde
2024-10-04 15:31 ` Jason Gunthorpe
2024-10-08 10:08 ` Vasant Hegde
2024-09-11 10:19 ` [PATCH v2 8/8] iommu/amd: Implement global identity domain Vasant Hegde
2024-10-02 19:36 ` Jason Gunthorpe
2024-10-04 11:42 ` Vasant Hegde
2024-10-02 5:30 ` [PATCH v2 0/8] iommu: Domain allocation enhancements Vasant Hegde
2024-10-02 14:24 ` Jason Gunthorpe
2024-10-04 6:11 ` Vasant Hegde
2024-10-09 2:47 ` Baolu Lu
2024-10-09 9:53 ` Vasant Hegde
2024-10-09 12:15 ` Jason Gunthorpe
2024-10-10 6:40 ` Baolu Lu
2024-10-10 6:48 ` Baolu Lu
2024-10-10 11:38 ` Jason Gunthorpe
2024-10-10 14:06 ` Baolu Lu
2024-10-11 5:06 ` Tian, Kevin
2024-10-11 11:39 ` Jason Gunthorpe
2024-10-15 8:10 ` Tian, Kevin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zu1yUz6hPFuM49wx@ziepe.ca \
--to=jgg@ziepe.ca \
--cc=baolu.lu@linux.intel.com \
--cc=iommu@lists.linux.dev \
--cc=jacob.pan@linux.microsoft.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=robin.murphy@arm.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=vasant.hegde@amd.com \
--cc=will@kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox