Linux Kernel Selftest development
 help / color / mirror / Atom feed
From: linuxram at us.ibm.com (Ram Pai)
Subject: [Linux-kselftest-mirror] [PATCH v10 19/27] powerpc: Handle exceptions caused by pkey violation
Date: Thu, 18 Jan 2018 17:50:40 -0800	[thread overview]
Message-ID: <1516326648-22775-20-git-send-email-linuxram@us.ibm.com> (raw)
In-Reply-To: <1516326648-22775-1-git-send-email-linuxram@us.ibm.com>

Handle Data and  Instruction exceptions caused by memory
protection-key.

The CPU will detect the key fault if the HPTE is already
programmed with the key.

However if the HPTE is not  hashed, a key fault will not
be detected by the hardware. The software will detect
pkey violation in such a case.

Signed-off-by: Ram Pai <linuxram at us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/reg.h       |    1 -
 arch/powerpc/kernel/exceptions-64s.S |    2 +-
 arch/powerpc/mm/fault.c              |   22 ++++++++++++++++++++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index b779f3c..ffc9990 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -312,7 +312,6 @@
 				 DSISR_BAD_EXT_CTRL)
 #define	  DSISR_BAD_FAULT_64S	(DSISR_BAD_FAULT_32S	| \
 				 DSISR_ATTR_CONFLICT	| \
-				 DSISR_KEYFAULT		| \
 				 DSISR_UNSUPP_MMU	| \
 				 DSISR_PRTABLE_FAULT	| \
 				 DSISR_ICSWX_NO_CT	| \
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e441b46..804e804 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1521,7 +1521,7 @@ USE_TEXT_SECTION()
 	.balign	IFETCH_ALIGN_BYTES
 do_hash_page:
 #ifdef CONFIG_PPC_BOOK3S_64
-	lis	r0,(DSISR_BAD_FAULT_64S|DSISR_DABRMATCH)@h
+	lis	r0,(DSISR_BAD_FAULT_64S | DSISR_DABRMATCH | DSISR_KEYFAULT)@h
 	ori	r0,r0,DSISR_BAD_FAULT_64S at l
 	and.	r0,r4,r0		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 4797d08..943a91e 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -427,6 +427,11 @@ static int __do_page_fault(struct pt_regs *regs, unsigned long address,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+	if (error_code & DSISR_KEYFAULT) {
+		_exception(SIGSEGV, regs, SEGV_PKUERR, address);
+		return 0;
+	}
+
 	/*
 	 * We want to do this outside mmap_sem, because reading code around nip
 	 * can result in fault, which will cause a deadlock when called with
@@ -498,6 +503,23 @@ static int __do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * the fault.
 	 */
 	fault = handle_mm_fault(vma, address, flags);
+
+#ifdef CONFIG_PPC_MEM_KEYS
+	/*
+	 * if the HPTE is not hashed, hardware will not detect
+	 * a key fault. Lets check if we failed because of a
+	 * software detected key fault.
+	 */
+	if (unlikely(fault & VM_FAULT_SIGSEGV) &&
+		!arch_vma_access_permitted(vma, flags & FAULT_FLAG_WRITE,
+			is_exec, 0)) {
+		int pkey = vma_pkey(vma);
+
+		if (likely(pkey))
+			return __bad_area(regs, address, SEGV_PKUERR);
+	}
+#endif /* CONFIG_PPC_MEM_KEYS */
+
 	major |= fault & VM_FAULT_MAJOR;
 
 	/*
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: linuxram@us.ibm.com (Ram Pai)
Subject: [Linux-kselftest-mirror] [PATCH v10 19/27] powerpc: Handle exceptions caused by pkey violation
Date: Thu, 18 Jan 2018 17:50:40 -0800	[thread overview]
Message-ID: <1516326648-22775-20-git-send-email-linuxram@us.ibm.com> (raw)
Message-ID: <20180119015040.EStHXKvlmg9JCeohXl0KYf-7otljqHaOnbIT8BaZAuw@z> (raw)
In-Reply-To: <1516326648-22775-1-git-send-email-linuxram@us.ibm.com>

Handle Data and  Instruction exceptions caused by memory
protection-key.

The CPU will detect the key fault if the HPTE is already
programmed with the key.

However if the HPTE is not  hashed, a key fault will not
be detected by the hardware. The software will detect
pkey violation in such a case.

Signed-off-by: Ram Pai <linuxram at us.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman at linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/reg.h       |    1 -
 arch/powerpc/kernel/exceptions-64s.S |    2 +-
 arch/powerpc/mm/fault.c              |   22 ++++++++++++++++++++++
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index b779f3c..ffc9990 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -312,7 +312,6 @@
 				 DSISR_BAD_EXT_CTRL)
 #define	  DSISR_BAD_FAULT_64S	(DSISR_BAD_FAULT_32S	| \
 				 DSISR_ATTR_CONFLICT	| \
-				 DSISR_KEYFAULT		| \
 				 DSISR_UNSUPP_MMU	| \
 				 DSISR_PRTABLE_FAULT	| \
 				 DSISR_ICSWX_NO_CT	| \
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e441b46..804e804 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1521,7 +1521,7 @@ USE_TEXT_SECTION()
 	.balign	IFETCH_ALIGN_BYTES
 do_hash_page:
 #ifdef CONFIG_PPC_BOOK3S_64
-	lis	r0,(DSISR_BAD_FAULT_64S|DSISR_DABRMATCH)@h
+	lis	r0,(DSISR_BAD_FAULT_64S | DSISR_DABRMATCH | DSISR_KEYFAULT)@h
 	ori	r0,r0,DSISR_BAD_FAULT_64S at l
 	and.	r0,r4,r0		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 4797d08..943a91e 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -427,6 +427,11 @@ static int __do_page_fault(struct pt_regs *regs, unsigned long address,
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 
+	if (error_code & DSISR_KEYFAULT) {
+		_exception(SIGSEGV, regs, SEGV_PKUERR, address);
+		return 0;
+	}
+
 	/*
 	 * We want to do this outside mmap_sem, because reading code around nip
 	 * can result in fault, which will cause a deadlock when called with
@@ -498,6 +503,23 @@ static int __do_page_fault(struct pt_regs *regs, unsigned long address,
 	 * the fault.
 	 */
 	fault = handle_mm_fault(vma, address, flags);
+
+#ifdef CONFIG_PPC_MEM_KEYS
+	/*
+	 * if the HPTE is not hashed, hardware will not detect
+	 * a key fault. Lets check if we failed because of a
+	 * software detected key fault.
+	 */
+	if (unlikely(fault & VM_FAULT_SIGSEGV) &&
+		!arch_vma_access_permitted(vma, flags & FAULT_FLAG_WRITE,
+			is_exec, 0)) {
+		int pkey = vma_pkey(vma);
+
+		if (likely(pkey))
+			return __bad_area(regs, address, SEGV_PKUERR);
+	}
+#endif /* CONFIG_PPC_MEM_KEYS */
+
 	major |= fault & VM_FAULT_MAJOR;
 
 	/*
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2018-01-19  1:50 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-19  1:50 [Linux-kselftest-mirror] [PATCH v10 00/27] powerpc, mm: Memory Protection Keys linuxram
2018-01-19  1:50 ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 01/27] mm, powerpc, x86: define VM_PKEY_BITx bits if CONFIG_ARCH_HAS_PKEYS is enabled linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-21 15:34   ` aneesh.kumar
2018-01-21 15:34     ` Aneesh Kumar K.V
2018-01-23  6:37   ` linuxram
2018-01-23  6:37     ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 02/27] mm, powerpc, x86: introduce an additional vma bit for powerpc pkey linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 03/27] powerpc: initial pkey plumbing linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-22  3:34   ` [Linux-kselftest-mirror] [v10, " patch-notifications
2018-01-22  3:34     ` Michael Ellerman
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 04/27] powerpc: track allocation status of all pkeys linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 05/27] powerpc: helper function to read, write AMR, IAMR, UAMOR registers linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 06/27] powerpc: helper functions to initialize AMR, IAMR and " linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 07/27] powerpc: cleanup AMR, IAMR when a key is allocated or freed linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 08/27] powerpc: implementation for arch_set_user_pkey_access() linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 09/27] powerpc: ability to create execute-disabled pkeys linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 10/27] powerpc: store and restore the pkey state across context switches linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 11/27] powerpc: introduce execute-only pkey linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 12/27] powerpc: ability to associate pkey to a vma linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 13/27] powerpc: implementation for arch_override_mprotect_pkey() linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 14/27] powerpc: map vma key-protection bits to pte key bits linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 15/27] powerpc: Program HPTE key protection bits linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 16/27] powerpc: helper to validate key-access permissions of a pte linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 17/27] powerpc: check key protection for user page access linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 18/27] powerpc: implementation for arch_vma_access_permitted() linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` linuxram [this message]
2018-01-19  1:50   ` [Linux-kselftest-mirror] [PATCH v10 19/27] powerpc: Handle exceptions caused by pkey violation Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 20/27] powerpc: introduce get_mm_addr_key() helper linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 21/27] powerpc: Deliver SEGV signal on pkey violation linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 22/27] powerpc/ptrace: Add memory protection key regset linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 23/27] powerpc: Enable pkey subsystem linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 24/27] powerpc: sys_pkey_alloc() and sys_pkey_free() system calls linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 25/27] powerpc: sys_pkey_mprotect() system call linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 26/27] mm, x86 : introduce arch_pkeys_enabled() linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19  1:50 ` [Linux-kselftest-mirror] [PATCH v10 27/27] mm: display pkey in smaps if arch_pkeys_enabled() is true linuxram
2018-01-19  1:50   ` Ram Pai
2018-01-19 16:09   ` ebiederm
2018-01-19 16:09     ` Eric W. Biederman
2018-01-19 16:50     ` linuxram
2018-01-19 16:50       ` Ram Pai
2018-01-19 17:04       ` ebiederm
2018-01-19 17:04         ` Eric W. Biederman
2018-01-30 12:16   ` mhocko
2018-01-30 12:16     ` Michal Hocko
2018-01-30 16:28     ` linuxram
2018-01-30 16:28       ` Ram Pai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1516326648-22775-20-git-send-email-linuxram@us.ibm.com \
    --to=linux-kselftest@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox