From: <gerg@snapgear.com>
To: linux-m68k@vger.kernel.org, uclinux-dev@uclinux.org
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 08/36] m68k: init the MMU hardware for the 54xx ColdFire
Date: Tue, 25 Oct 2011 17:19:00 +1000 [thread overview]
Message-ID: <1319527168-11166-9-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1319527168-11166-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
If we want to run with the MMU enabled on the 54xx ColdFire CPUs then
we need to initialize it at startup. We also need to reserve some space
for the kernel's page table directory.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/platform/coldfire/head.S | 38 +++++++++++++++++++++++++++++++++++-
1 files changed, 37 insertions(+), 1 deletions(-)
diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S
index c334838..00ba371 100644
--- a/arch/m68k/platform/coldfire/head.S
+++ b/arch/m68k/platform/coldfire/head.S
@@ -3,7 +3,7 @@
/*
* head.S -- common startup code for ColdFire CPUs.
*
- * (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
+ * (C) Copyright 1999-2011, Greg Ungerer <gerg@snapgear.com>.
*/
/*****************************************************************************/
@@ -13,6 +13,7 @@
#include <asm/asm-offsets.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
+#include <asm/mcfmmu.h>
#include <asm/thread_info.h>
/*****************************************************************************/
@@ -135,6 +136,14 @@ _init_sp:
__HEAD
+#ifdef CONFIG_MMU
+_start0:
+ jmp _start
+.global kernel_pg_dir
+.equ kernel_pg_dir,_start0
+.equ .,_start0+0x1000
+#endif
+
/*
* This is the codes first entry point. This is where it all
* begins...
@@ -193,6 +202,26 @@ _start:
movec %d0,%CACR
nop
+#ifdef CONFIG_MMU
+ /*
+ * Identity mapping for the kernel region.
+ */
+ movel #(MMUBASE+1),%d0 /* enable MMUBAR registers */
+ movec %d0,%MMUBAR
+ movel #MMUOR_CA,%d0 /* clear TLB entries */
+ movel %d0,MMUOR
+ movel #0,%d0 /* set ASID to 0 */
+ movec %d0,%asid
+
+ movel #MMUCR_EN,%d0 /* Enable the identity map */
+ movel %d0,MMUCR
+ nop /* sync i-pipeline */
+
+ movel #_vstart,%a0 /* jump to "virtual" space */
+ jmp %a0@
+_vstart:
+#endif /* CONFIG_MMU */
+
#ifdef CONFIG_ROMFS_FS
/*
* Move ROM filesystem above bss :-)
@@ -238,6 +267,13 @@ _clear_bss:
lea init_thread_union,%a0
lea THREAD_SIZE(%a0),%sp
+#ifdef CONFIG_MMU
+.global m68k_machtype
+ movel #MACH_M54XX,%d0
+ movel %d0,m68k_machtype /* Mark us as a ColdFire */
+ lea init_task,%a2 /* Set "current" init task */
+#endif
+
/*
* Assember start up done, start code proper.
*/
--
1.7.0.4
next prev parent reply other threads:[~2011-10-25 7:19 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-25 7:18 [PATCH 00/36] m68k: ColdFire MMU support gerg
2011-10-25 7:18 ` [PATCH 01/36] m68k: add machine and CPU definitions for ColdFire cores gerg
2011-10-25 7:18 ` [PATCH 02/36] m68k: show ColdFire CPU/FPU/MMU type gerg
2011-10-25 7:18 ` [PATCH 03/36] m68k: definitions for the ColdFire V4e MMU hardware gerg
2011-10-25 7:18 ` [PATCH 04/36] m68k: make old interrupt code conditional on correct CPU types gerg
2011-10-25 7:18 ` [PATCH 05/36] m68k: add TASK definitions for ColdFires running with MMU gerg
2011-10-25 7:18 ` [PATCH 06/36] m68k: modify user space access functions to support ColdFire CPUs gerg
2011-10-30 13:02 ` Geert Uytterhoeven
2011-10-31 5:03 ` Greg Ungerer
2011-10-25 7:18 ` [PATCH 07/36] m68k: add ColdFire 54xx CPU MMU memory init code gerg
2011-10-25 7:19 ` gerg [this message]
2011-10-25 7:19 ` [PATCH 09/36] m68k: set register a2 to current if MMU enabled on ColdFire gerg
2011-10-30 13:06 ` Geert Uytterhoeven
2011-10-31 4:19 ` Greg Ungerer
2011-10-25 7:19 ` [PATCH 10/36] m68k: page table support definitions and code for ColdFire MMU gerg
2011-10-30 13:07 ` Geert Uytterhoeven
2011-10-25 7:19 ` [PATCH 11/36] m68k: add page table size definitions for ColdFire V4e MMU gerg
2011-10-25 7:19 ` [PATCH 12/36] m68k: add ColdFire paging exception handling code gerg
2011-10-25 7:19 ` [PATCH 13/36] m68k: add cache support for V4e ColdFire cores running with MMU enabled gerg
2011-10-25 7:19 ` [PATCH 14/36] m68k: modify ColdFire 54xx cache support for " gerg
2011-10-25 7:19 ` [PATCH 15/36] m68k: add TLB flush support for the ColdFire V4e MMU hardware gerg
2011-10-30 13:26 ` Geert Uytterhoeven
2011-10-25 7:19 ` [PATCH 16/36] m68k: set ColdFire MMU page size gerg
2011-10-30 13:29 ` Geert Uytterhoeven
2011-10-31 4:41 ` Greg Ungerer
2011-10-25 7:19 ` [PATCH 17/36] m68k: ColdFire with MMU does not support separate address spaces gerg
2011-10-25 7:19 ` [PATCH 18/36] m68k: ColdFire V4e MMU context support code gerg
2011-10-25 7:19 ` [PATCH 19/36] m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path gerg
2011-10-25 7:19 ` [PATCH 20/36] m68k: ColdFire with MMU needs simpler lib checksum code gerg
2011-10-25 7:19 ` [PATCH 21/36] m68k: modify cache push and clear code for ColdFire with MMU enable gerg
2011-10-25 7:19 ` [PATCH 22/36] m68k: use ColdFire V4e MMU flags when ioremapping() gerg
2011-10-25 7:19 ` [PATCH 23/36] m68k: ColdFire V4e MMU paginit init code and miss handler gerg
2011-10-30 15:56 ` Finn Thain
2011-10-31 4:46 ` Greg Ungerer
2011-10-25 7:19 ` [PATCH 24/36] m68k: compile appropriate mm arch files for ColdFire V4e MMU support gerg
2011-10-30 13:46 ` Geert Uytterhoeven
2011-10-31 5:39 ` Greg Ungerer
2011-10-25 7:19 ` [PATCH 25/36] m68k: create ColdFire MMU pgalloc code gerg
2011-10-25 7:19 ` [PATCH 26/36] m68k: use non-MMU entry.S code when compiling for ColdFire CPU gerg
2011-10-25 7:19 ` [PATCH 27/36] m68k: add code to setup a ColdFire 54xx platform when MMU enabled gerg
2011-10-30 13:39 ` Geert Uytterhoeven
2011-10-31 4:59 ` Greg Ungerer
2011-10-25 7:19 ` [PATCH 28/36] m68k: ColdFire with MMU enabled uses same clocking code as non-MMU gerg
2011-10-25 7:19 ` [PATCH 29/36] m68k: use non-MMU linker script for ColdFire MMU builds gerg
2011-10-25 7:19 ` [PATCH 30/36] m68k: adjustments to stack frame for ColdFire with MMU enabled gerg
2011-10-25 7:19 ` [PATCH 31/36] m68k: completely disable FPU support for ColdFire gerg
2011-10-30 15:56 ` Finn Thain
2011-10-25 7:19 ` [PATCH 32/36] m68k: use new style interrupt handling for ColdFire with MMU enabled gerg
2011-10-25 7:19 ` [PATCH 33/36] m68k: define a ack_bad_irq() function for ColdFire with MMU gerg
2011-10-25 7:19 ` [PATCH 34/36] m68k: add ColdFire with MMU enabled support to the m68k mem init code gerg
2011-10-25 7:19 ` [PATCH 35/36] m68k: config option adjustments for configuring ColdFire with MMU gerg
2011-10-30 13:42 ` Geert Uytterhoeven
2011-10-25 7:19 ` [PATCH 36/36] m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled gerg
2011-10-30 13:47 ` [PATCH 00/36] m68k: ColdFire MMU support Geert Uytterhoeven
2011-10-31 5:46 ` Greg Ungerer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319527168-11166-9-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox