* [linux-dvb] [PATCH] [RESEND] stb6100: stb6100_init fix
[not found] ` <20090108100149.2c6df55e@pedra.chehab.org>
@ 2009-01-08 17:17 ` Hans Werner
2009-01-08 20:14 ` Manu Abraham
0 siblings, 1 reply; 2+ messages in thread
From: Hans Werner @ 2009-01-08 17:17 UTC (permalink / raw)
To: Mauro Carvalho Chehab, linux-media, abraham.manu, linux-dvb
> > Hi Mauro,
> > please look at the patch below.
> >
> > Signed-off-by: Hans Werner <hwerner4@gmx.de>
> >
> > Thanks,
> > Hans
> >
> > -------- Original-Nachricht --------
> > Datum: Mon, 05 Jan 2009 16:10:50 +0100
> > Von: "Hans Werner" <HWerner4@gmx.de>
> > An: linux-dvb@linuxtv.org
> > Betreff: [linux-dvb] [PATCH] stb6100: stb6100_init fix
> >
> > Two issues in stb6100_init : the call to stb6100_set_bandwidth needs an
> argument in Hz
> > not kHz, and a comment incorrectly says MHz instead of Hz. I don't know
> if this caused
> > real problems anywhere.
> >
> > This patch is for v4l-dvb, but it is also needs to be fixed in
> s2-liplianin.
> >
> > ...
> > ...
>
> Considering that the ioctl use "state" instead of "status", your patch
> looks
> sane:
>
> case DVBFE_TUNER_BANDWIDTH:
> stb6100_set_bandwidth(fe, state->bandwidth);
>
> Could you please re-send this patch to me, mentioning the above,
> explicitly C/C
> Manu, linux-media and linux-dvb ML's? Please, mark the patch as a resend.
>
> Cheers,
> Mauro
Resending the following patch as requested by Mauro.
Signed-off-by: Hans Werner <hwerner4@gmx.de>
diff -r b7e7abe3e3aa linux/drivers/media/dvb/frontends/stb6100.c
--- a/linux/drivers/media/dvb/frontends/stb6100.c
+++ b/linux/drivers/media/dvb/frontends/stb6100.c
@@ -434,11 +434,11 @@ static int stb6100_init(struct dvb_front
status->refclock = 27000000; /* Hz */
status->iqsense = 1;
status->bandwidth = 36000; /* kHz */
- state->bandwidth = status->bandwidth * 1000; /* MHz */
+ state->bandwidth = status->bandwidth * 1000; /* Hz */
state->reference = status->refclock / 1000; /* kHz */
/* Set default bandwidth. */
- return stb6100_set_bandwidth(fe, status->bandwidth);
+ return stb6100_set_bandwidth(fe, state->bandwidth);
}
static int stb6100_get_state(struct dvb_frontend *fe,
--
Release early, release often.
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 2+ messages in thread