From: Daniel Scally <djrscally@gmail.com>
To: djrscally@gmail.com, sakari.ailus@linux.intel.com,
paul.kocialkowski@bootlin.com, ezequiel@collabora.com,
hverkuil-cisco@xs4all.nl, linux-media@vger.kernel.org
Cc: yong.zhi@intel.com, bingbu.cao@intel.com, tian.shu.qiu@intel.com,
kevin.lhopital@bootlin.com, yang.lee@linux.alibaba.com,
andy.shevchenko@gmail.com, laurent.pinchart@ideasonboard.com,
kieran.bingham@ideasonboard.com
Subject: [PATCH v2 05/12] media: i2c: Add .get_selection() support to ov8865
Date: Mon, 9 Aug 2021 23:58:38 +0100 [thread overview]
Message-ID: <20210809225845.916430-6-djrscally@gmail.com> (raw)
In-Reply-To: <20210809225845.916430-1-djrscally@gmail.com>
The ov8865 driver's v4l2_subdev_pad_ops currently does not include
.get_selection() - add support for that callback.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
Changes in v2:
- None
drivers/media/i2c/ov8865.c | 61 ++++++++++++++++++++++++++++++++++++++
1 file changed, 61 insertions(+)
diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
index 1382b16d1a09..8c2b7d3cbc8c 100644
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -450,6 +450,15 @@
#define OV8865_PRE_CTRL0_PATTERN_COLOR_SQUARES 2
#define OV8865_PRE_CTRL0_PATTERN_BLACK 3
+/* Pixel Array */
+
+#define OV8865_NATIVE_WIDTH 3296
+#define OV8865_NATIVE_HEIGHT 2528
+#define OV8865_ACTIVE_START_TOP 32
+#define OV8865_ACTIVE_START_LEFT 80
+#define OV8865_ACTIVE_WIDTH 3264
+#define OV8865_ACTIVE_HEIGHT 2448
+
/* Macros */
#define ov8865_subdev_sensor(s) \
@@ -2749,12 +2758,64 @@ static int ov8865_enum_frame_interval(struct v4l2_subdev *subdev,
return 0;
}
+static void
+__ov8865_get_pad_crop(struct ov8865_sensor *sensor,
+ struct v4l2_subdev_state *state, unsigned int pad,
+ enum v4l2_subdev_format_whence which, struct v4l2_rect *r)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ *r = *v4l2_subdev_get_try_crop(&sensor->subdev, state, pad);
+ break;
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ r->height = sensor->state.mode->output_size_y;
+ r->width = sensor->state.mode->output_size_x;
+ r->top = (OV8865_NATIVE_HEIGHT - sensor->state.mode->output_size_y) / 2;
+ r->left = (OV8865_NATIVE_WIDTH - sensor->state.mode->output_size_x) / 2;
+ break;
+ }
+}
+
+static int ov8865_get_selection(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_selection *sel)
+{
+ struct ov8865_sensor *sensor = ov8865_subdev_sensor(subdev);
+
+ switch (sel->target) {
+ case V4L2_SEL_TGT_CROP:
+ mutex_lock(&sensor->mutex);
+ __ov8865_get_pad_crop(sensor, state, sel->pad,
+ sel->which, &sel->r);
+ mutex_unlock(&sensor->mutex);
+ break;
+ case V4L2_SEL_TGT_NATIVE_SIZE:
+ sel->r.top = 0;
+ sel->r.left = 0;
+ sel->r.width = OV8865_NATIVE_WIDTH;
+ sel->r.height = OV8865_NATIVE_HEIGHT;
+ break;
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ sel->r.top = OV8865_ACTIVE_START_TOP;
+ sel->r.left = OV8865_ACTIVE_START_LEFT;
+ sel->r.width = OV8865_ACTIVE_WIDTH;
+ sel->r.height = OV8865_ACTIVE_HEIGHT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops ov8865_subdev_pad_ops = {
.enum_mbus_code = ov8865_enum_mbus_code,
.get_fmt = ov8865_get_fmt,
.set_fmt = ov8865_set_fmt,
.enum_frame_size = ov8865_enum_frame_size,
.enum_frame_interval = ov8865_enum_frame_interval,
+ .get_selection = ov8865_get_selection,
};
static const struct v4l2_subdev_ops ov8865_subdev_ops = {
--
2.25.1
next prev parent reply other threads:[~2021-08-09 22:59 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-09 22:58 [PATCH v2 00/12] Extensions to ov8865 driver Daniel Scally
2021-08-09 22:58 ` [PATCH v2 01/12] media: i2c: Add ACPI support to ov8865 Daniel Scally
2021-08-10 12:57 ` Andy Shevchenko
2021-08-09 22:58 ` [PATCH v2 02/12] media: i2c: Fix incorrect value in comment Daniel Scally
2021-08-09 22:58 ` [PATCH v2 03/12] media: i2c: Defer probe if not endpoint found Daniel Scally
2021-08-09 22:58 ` [PATCH v2 04/12] media: i2c: Support 19.2MHz input clock in ov8865 Daniel Scally
2021-08-10 13:04 ` Andy Shevchenko
2021-08-10 21:46 ` Daniel Scally
2021-08-10 13:34 ` Sakari Ailus
2021-08-10 21:37 ` Daniel Scally
2021-08-10 21:49 ` Sakari Ailus
2021-09-07 22:44 ` Daniel Scally
2021-09-08 6:52 ` Sakari Ailus
2021-08-09 22:58 ` Daniel Scally [this message]
2021-08-10 13:38 ` [PATCH v2 05/12] media: i2c: Add .get_selection() support to ov8865 Sakari Ailus
2021-08-24 23:17 ` Daniel Scally
2021-08-25 7:16 ` Sakari Ailus
2021-08-25 8:04 ` Laurent Pinchart
2021-08-25 8:29 ` Sakari Ailus
2021-08-09 22:58 ` [PATCH v2 06/12] media: i2c: Switch control to V4L2_CID_ANALOGUE_GAIN Daniel Scally
2021-08-10 13:48 ` Sakari Ailus
2021-08-09 22:58 ` [PATCH v2 07/12] media: i2c: Add vblank control to ov8865 Daniel Scally
2021-08-09 22:58 ` [PATCH v2 08/12] media: i2c: Add hblank " Daniel Scally
2021-08-10 13:10 ` Andy Shevchenko
2021-08-10 14:29 ` Sakari Ailus
2021-08-10 22:07 ` Daniel Scally
2021-08-13 3:05 ` Laurent Pinchart
2021-08-13 9:45 ` Daniel Scally
2021-08-14 20:56 ` Laurent Pinchart
2021-09-09 22:36 ` Daniel Scally
2021-10-09 23:10 ` Daniel Scally
2021-08-09 22:58 ` [PATCH v2 09/12] media: i2c: cap exposure at height + vblank in ov8865 Daniel Scally
2021-08-10 14:30 ` Sakari Ailus
2021-08-09 22:58 ` [PATCH v2 10/12] media: i2c: Add controls from fwnode to ov8865 Daniel Scally
2021-08-09 22:58 ` [PATCH v2 11/12] media: i2c: Switch exposure control unit to lines Daniel Scally
2021-08-09 22:58 ` [PATCH v2 12/12] media: ipu3-cio2: Add INT347A to cio2-bridge Daniel Scally
2021-08-10 13:12 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210809225845.916430-6-djrscally@gmail.com \
--to=djrscally@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=bingbu.cao@intel.com \
--cc=ezequiel@collabora.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kevin.lhopital@bootlin.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tian.shu.qiu@intel.com \
--cc=yang.lee@linux.alibaba.com \
--cc=yong.zhi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox