From: Hans de Goede <hansg@kernel.org>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans de Goede <hansg@kernel.org>,
Mathis Foerst <mathis.foerst@mt.com>,
linux-media@vger.kernel.org
Subject: [PATCH v3 15/15] media: mt9m114: Add ACPI enumeration support
Date: Sun, 29 Jun 2025 22:56:25 +0200 [thread overview]
Message-ID: <20250629205626.68341-16-hansg@kernel.org> (raw)
In-Reply-To: <20250629205626.68341-1-hansg@kernel.org>
Add support for the mt9m114 sensor being enumerated through ACPI
using the INT33F0 HID as found on the Asus T100TA.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
---
drivers/media/i2c/mt9m114.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
index 5e759a23e6cc..710c9a870458 100644
--- a/drivers/media/i2c/mt9m114.c
+++ b/drivers/media/i2c/mt9m114.c
@@ -2643,11 +2643,18 @@ static const struct of_device_id mt9m114_of_ids[] = {
};
MODULE_DEVICE_TABLE(of, mt9m114_of_ids);
+static const struct acpi_device_id mt9m114_acpi_ids[] = {
+ { "INT33F0" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(acpi, mt9m114_acpi_ids);
+
static struct i2c_driver mt9m114_driver = {
.driver = {
.name = "mt9m114",
.pm = &mt9m114_pm_ops,
.of_match_table = mt9m114_of_ids,
+ .acpi_match_table = mt9m114_acpi_ids,
},
.probe = mt9m114_probe,
.remove = mt9m114_remove,
--
2.49.0
next prev parent reply other threads:[~2025-06-29 20:57 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-29 20:56 [PATCH v3 00/15] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-06-29 20:56 ` [PATCH v3 01/15] media: aptina-pll: Debug log p1 min and max values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 02/15] media: mt9m114: Add support for clock-frequency property Hans de Goede
2025-06-29 20:56 ` [PATCH v3 03/15] media: mt9m114: Use aptina-PLL helper to get PLL values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 04/15] media: mt9m114: Lower minimum vblank value Hans de Goede
2025-06-29 20:56 ` [PATCH v3 05/15] media: mt9m114: Fix default hblank and vblank values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 06/15] media: mt9m114: Tweak default hblank and vblank for more accurate fps Hans de Goede
2025-06-29 20:56 ` [PATCH v3 07/15] media: mt9m114: Avoid a reset low spike during probe() Hans de Goede
2025-06-29 20:56 ` [PATCH v3 08/15] media: mt9m114: Put sensor in reset on power down Hans de Goede
2025-06-29 20:56 ` [PATCH v3 09/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function Hans de Goede
2025-07-02 0:17 ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 10/15] media: mt9m114: Adjust IFP selections and src format when src pixelfmt changes to/from RAW10 Hans de Goede
2025-07-02 0:32 ` Laurent Pinchart
2025-12-23 13:33 ` Hans de Goede
2025-06-29 20:56 ` [PATCH v3 11/15] media: mt9m114: Update src pad sel and format when sink pad format changes Hans de Goede
2025-07-02 0:36 ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler Hans de Goede
2025-07-02 0:42 ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 13/15] media: mt9m114: Drop start-, stop-streaming sequence from initialize Hans de Goede
2025-07-02 1:08 ` Laurent Pinchart
2025-12-23 13:37 ` Hans de Goede
2025-12-23 16:50 ` Laurent Pinchart
2025-12-23 16:57 ` Hans de Goede
2025-06-29 20:56 ` [PATCH v3 14/15] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found Hans de Goede
2025-07-02 0:53 ` Laurent Pinchart
2025-12-24 12:12 ` Hans de Goede
2025-12-27 14:54 ` Laurent Pinchart
2025-06-29 20:56 ` Hans de Goede [this message]
[not found] ` <6861b00f.050a0220.379e4a.5185@mx.google.com>
2025-06-30 7:34 ` [v3,00/15] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-06-30 22:28 ` [PATCH v3 00/15] " Laurent Pinchart
2025-07-01 13:21 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250629205626.68341-16-hansg@kernel.org \
--to=hansg@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mathis.foerst@mt.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox