From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Hans de Goede <hansg@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>,
Mathis Foerst <mathis.foerst@mt.com>,
linux-media@vger.kernel.org
Subject: Re: [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler
Date: Wed, 2 Jul 2025 03:42:04 +0300 [thread overview]
Message-ID: <20250702004204.GG17819@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250629205626.68341-13-hansg@kernel.org>
Hi Hans,
Thank you for the patch.
On Sun, Jun 29, 2025 at 10:56:22PM +0200, Hans de Goede wrote:
> The scaler is bypassed when the ISP source/output pad's pixel-format is
> set to MEDIA_BUS_FMT_SGRBG10_1X10. Don't allow changing the IFP crop and/or
> compose selections when in this mode.
>
> Instead of returning -EINVAL simply return the current (noop) crop and
> compose rectangles.
>
> Signed-off-by: Hans de Goede <hansg@kernel.org>
> ---
> Changes in v3:
> - This is a new patch in v3 of this patch-set, which comes from splitting
> up "media: mt9m114: Fix scaler bypass mode" into multiple patches
> - Add src_format local variable
> ---
> drivers/media/i2c/mt9m114.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
> index 1f305bba180e..1280d90cd411 100644
> --- a/drivers/media/i2c/mt9m114.c
> +++ b/drivers/media/i2c/mt9m114.c
> @@ -1963,7 +1963,7 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *state,
> struct v4l2_subdev_selection *sel)
> {
> - struct v4l2_mbus_framefmt *format;
> + struct v4l2_mbus_framefmt *format, *src_format;
> struct v4l2_rect *crop;
> struct v4l2_rect *compose;
> unsigned int border;
> @@ -1976,6 +1976,13 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
> if (sel->pad != 0)
> return -EINVAL;
>
> + /* Crop and compose cannot be changed when bypassing the scaler. */
> + src_format = v4l2_subdev_state_get_format(state, 1);
> + if (src_format->code == MEDIA_BUS_FMT_SGRBG10_1X10) {
> + sel->r = *v4l2_subdev_state_get_crop(state, 0);
You can move the
crop = v4l2_subdev_state_get_crop(state, 0);
line from below above the if statement, and use
sel->r = *crop;
here.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + return 0;
> + }
> +
> format = v4l2_subdev_state_get_format(state, 0);
> crop = v4l2_subdev_state_get_crop(state, 0);
> compose = v4l2_subdev_state_get_compose(state, 0);
> @@ -2022,9 +2029,8 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
> }
>
> /* Propagate the compose rectangle to the source format. */
> - format = v4l2_subdev_state_get_format(state, 1);
> - format->width = compose->width;
> - format->height = compose->height;
> + src_format->width = compose->width;
> + src_format->height = compose->height;
>
> return 0;
> }
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-07-02 0:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-29 20:56 [PATCH v3 00/15] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-06-29 20:56 ` [PATCH v3 01/15] media: aptina-pll: Debug log p1 min and max values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 02/15] media: mt9m114: Add support for clock-frequency property Hans de Goede
2025-06-29 20:56 ` [PATCH v3 03/15] media: mt9m114: Use aptina-PLL helper to get PLL values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 04/15] media: mt9m114: Lower minimum vblank value Hans de Goede
2025-06-29 20:56 ` [PATCH v3 05/15] media: mt9m114: Fix default hblank and vblank values Hans de Goede
2025-06-29 20:56 ` [PATCH v3 06/15] media: mt9m114: Tweak default hblank and vblank for more accurate fps Hans de Goede
2025-06-29 20:56 ` [PATCH v3 07/15] media: mt9m114: Avoid a reset low spike during probe() Hans de Goede
2025-06-29 20:56 ` [PATCH v3 08/15] media: mt9m114: Put sensor in reset on power down Hans de Goede
2025-06-29 20:56 ` [PATCH v3 09/15] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function Hans de Goede
2025-07-02 0:17 ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 10/15] media: mt9m114: Adjust IFP selections and src format when src pixelfmt changes to/from RAW10 Hans de Goede
2025-07-02 0:32 ` Laurent Pinchart
2025-12-23 13:33 ` Hans de Goede
2025-06-29 20:56 ` [PATCH v3 11/15] media: mt9m114: Update src pad sel and format when sink pad format changes Hans de Goede
2025-07-02 0:36 ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 12/15] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler Hans de Goede
2025-07-02 0:42 ` Laurent Pinchart [this message]
2025-06-29 20:56 ` [PATCH v3 13/15] media: mt9m114: Drop start-, stop-streaming sequence from initialize Hans de Goede
2025-07-02 1:08 ` Laurent Pinchart
2025-12-23 13:37 ` Hans de Goede
2025-12-23 16:50 ` Laurent Pinchart
2025-12-23 16:57 ` Hans de Goede
2025-06-29 20:56 ` [PATCH v3 14/15] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found Hans de Goede
2025-07-02 0:53 ` Laurent Pinchart
2025-12-24 12:12 ` Hans de Goede
2025-12-27 14:54 ` Laurent Pinchart
2025-06-29 20:56 ` [PATCH v3 15/15] media: mt9m114: Add ACPI enumeration support Hans de Goede
[not found] ` <6861b00f.050a0220.379e4a.5185@mx.google.com>
2025-06-30 7:34 ` [v3,00/15] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-06-30 22:28 ` [PATCH v3 00/15] " Laurent Pinchart
2025-07-01 13:21 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250702004204.GG17819@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=hansg@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mathis.foerst@mt.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox