From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>,
"Tomi Valkeinen" <tomi.valkeinen+renesas@ideasonboard.com>,
"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>
Subject: [PATCH v6 03/11] media: rcar-isp: Move {enable|disable}_streams() calls
Date: Wed, 17 Jun 2026 14:54:56 +0300 [thread overview]
Message-ID: <20260617-rcar-streams-v6-3-1260eb72dff7@ideasonboard.com> (raw)
In-Reply-To: <20260617-rcar-streams-v6-0-1260eb72dff7@ideasonboard.com>
With multiple streams the operation to enable the ISP hardware and to
call {enable|disable}_streams() on upstream subdev will need to be
handled separately.
Prepare for that by moving {enable|disable}_streams() calls out from
risp_start() and risp_stop().
On Gen4, a side effect of this change is that if the sink side devices
call .enable_streams() on rcar-isp multiple times, the second call will
fail. This is because we always use stream ID 0, so the second call
would attempt to enable the same stream again, leading to an error. In
other words, a normal single-stream setup continues to work, but trying
to use the current driver's custom VC based routing will fail.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
drivers/media/platform/renesas/rcar-isp/csisp.c | 27 ++++++++++++++++---------
1 file changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
index 8fb2cc3b5650..58a9a3bd9f75 100644
--- a/drivers/media/platform/renesas/rcar-isp/csisp.c
+++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
@@ -268,18 +268,11 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
/* Start ISP. */
risp_write_cs(isp, ISPSTART_REG, ISPSTART_START);
- ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
- BIT_ULL(0));
- if (ret)
- risp_power_off(isp);
-
- return ret;
+ return 0;
}
static void risp_stop(struct rcar_isp *isp)
{
- v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, BIT_ULL(0));
-
/* Stop ISP. */
risp_write_cs(isp, ISPSTART_REG, ISPSTART_STOP);
@@ -291,7 +284,7 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
u64 source_streams_mask)
{
struct rcar_isp *isp = sd_to_isp(sd);
- int ret = 0;
+ int ret;
if (source_streams_mask != 1)
return -EINVAL;
@@ -305,9 +298,17 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
return ret;
}
+ ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
+ BIT_ULL(0));
+ if (ret) {
+ if (isp->stream_count == 0)
+ risp_stop(isp);
+ return ret;
+ }
+
isp->stream_count += 1;
- return ret;
+ return 0;
}
static int risp_disable_streams(struct v4l2_subdev *sd,
@@ -315,6 +316,7 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
u64 source_streams_mask)
{
struct rcar_isp *isp = sd_to_isp(sd);
+ int ret;
if (source_streams_mask != 1)
return -EINVAL;
@@ -322,6 +324,11 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
if (!isp->remote)
return -ENODEV;
+ ret = v4l2_subdev_disable_streams(isp->remote, isp->remote_pad,
+ BIT_ULL(0));
+ if (ret)
+ return ret;
+
if (isp->stream_count == 1)
risp_stop(isp);
--
2.43.0
next prev parent reply other threads:[~2026-06-17 11:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-17 11:54 [PATCH v6 00/11] media: rcar: Streams support Tomi Valkeinen
2026-06-17 11:54 ` [PATCH v6 01/11] media: rcar-vin: Fix comment related to stride handling Tomi Valkeinen
2026-09-07 10:37 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 02/11] media: rcar-vin: Link VINs on Gen3 to a single channel on each CSI-2 Tomi Valkeinen
2026-06-17 11:54 ` Tomi Valkeinen [this message]
2026-09-07 11:30 ` [PATCH v6 03/11] media: rcar-isp: Move {enable|disable}_streams() calls Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 04/11] media: rcar-csi2: " Tomi Valkeinen
2026-09-07 11:33 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 05/11] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2026-09-07 12:39 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 06/11] media: rcar-isp: " Tomi Valkeinen
2026-09-07 13:29 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 07/11] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2026-09-07 12:45 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 08/11] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2026-09-07 14:45 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 09/11] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2026-09-07 12:46 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 10/11] media: rcar-csi2: Add full streams support Tomi Valkeinen
2026-09-07 12:48 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 11/11] media: rcar-isp: " Tomi Valkeinen
2026-09-07 19:21 ` Niklas Söderlund
2026-09-07 19:25 ` [PATCH v6 00/11] media: rcar: Streams support Niklas Söderlund
2026-09-08 6:28 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260617-rcar-streams-v6-3-1260eb72dff7@ideasonboard.com \
--to=tomi.valkeinen+renesas@ideasonboard.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox