From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Subject: Re: [PATCH v6 06/11] media: rcar-isp: Switch to Streams API
Date: Mon, 7 Sep 2026 15:29:06 +0200 [thread overview]
Message-ID: <20260907132906.GJ3497753@ragnatech.se> (raw)
In-Reply-To: <20260617-rcar-streams-v6-6-1260eb72dff7@ideasonboard.com>
Hi Tomi,
Thanks for your work.
On 2026-06-17 14:54:59 +0300, Tomi Valkeinen wrote:
> Switch to Streams API with a single hardcoded route.
>
> For single-stream use case there should be no change in behavior.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/media/platform/renesas/rcar-isp/csisp.c | 69 ++++++++++++++++++++++---
> 1 file changed, 62 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> index 58a9a3bd9f75..8ac45516aa39 100644
> --- a/drivers/media/platform/renesas/rcar-isp/csisp.c
> +++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
> @@ -124,6 +124,17 @@ static const struct rcar_isp_format rcar_isp_formats[] = {
> },
> };
>
> +static const struct v4l2_mbus_framefmt risp_default_fmt = {
> + .width = 1920,
> + .height = 1080,
> + .code = MEDIA_BUS_FMT_RGB888_1X24,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .field = V4L2_FIELD_NONE,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> +};
> +
> static const struct rcar_isp_format *risp_code_to_fmt(unsigned int code)
> {
> unsigned int i;
> @@ -216,13 +227,20 @@ static void risp_power_off(struct rcar_isp *isp)
>
> static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
> {
> + const struct v4l2_subdev_route *route;
> const struct v4l2_mbus_framefmt *fmt;
> const struct rcar_isp_format *format;
> unsigned int vc;
> u32 sel_csi = 0;
> int ret;
>
> - fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK);
> + if (state->routing.num_routes != 1)
> + return -EINVAL;
> +
> + route = &state->routing.routes[0];
> +
> + fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
> + route->sink_stream);
> if (!fmt)
> return -EINVAL;
>
> @@ -341,7 +359,7 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *state,
> struct v4l2_subdev_format *format)
> {
> - struct v4l2_mbus_framefmt *framefmt;
> + struct v4l2_mbus_framefmt *fmt;
>
> if (format->pad > RCAR_ISP_SINK)
> return v4l2_subdev_get_fmt(sd, state, format);
> @@ -349,10 +367,20 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
> if (!risp_code_to_fmt(format->format.code))
> format->format.code = rcar_isp_formats[0].code;
>
> - for (unsigned int i = 0; i < RCAR_ISP_NUM_PADS; i++) {
> - framefmt = v4l2_subdev_state_get_format(state, i);
> - *framefmt = format->format;
> - }
> + /* Set sink format. */
> + fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
> + if (!fmt)
> + return -EINVAL;
> +
> + *fmt = format->format;
> +
> + /* Propagate the format to the source pad. */
> + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
> + format->stream);
> + if (!fmt)
> + return -EINVAL;
> +
> + *fmt = format->format;
>
> return 0;
> }
> @@ -369,6 +397,32 @@ static const struct v4l2_subdev_ops rcar_isp_subdev_ops = {
> .pad = &risp_pad_ops,
> };
>
> +static int risp_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + static struct v4l2_subdev_route routes[] = {
> + {
> + .sink_pad = RCAR_ISP_SINK,
> + .sink_stream = 0,
> + .source_pad = RCAR_ISP_PORT0,
> + .source_stream = 0,
> + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> + },
> + };
> +
> + static const struct v4l2_subdev_krouting routing = {
> + .num_routes = ARRAY_SIZE(routes),
> + .routes = routes,
> + };
> +
> + return v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
> + &risp_default_fmt);
> +}
> +
> +static const struct v4l2_subdev_internal_ops risp_internal_ops = {
> + .init_state = risp_init_state,
> +};
> +
> /* -----------------------------------------------------------------------------
> * Async handling and registration of subdevices and links
> */
> @@ -526,11 +580,12 @@ static int risp_probe(struct platform_device *pdev)
>
> isp->subdev.owner = THIS_MODULE;
> isp->subdev.dev = &pdev->dev;
> + isp->subdev.internal_ops = &risp_internal_ops;
> v4l2_subdev_init(&isp->subdev, &rcar_isp_subdev_ops);
> v4l2_set_subdevdata(&isp->subdev, &pdev->dev);
> snprintf(isp->subdev.name, sizeof(isp->subdev.name), "%s %s",
> KBUILD_MODNAME, dev_name(&pdev->dev));
> - isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> + isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
>
> isp->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
> isp->subdev.entity.ops = &risp_entity_ops;
>
> --
> 2.43.0
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2026-09-07 13:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-17 11:54 [PATCH v6 00/11] media: rcar: Streams support Tomi Valkeinen
2026-06-17 11:54 ` [PATCH v6 01/11] media: rcar-vin: Fix comment related to stride handling Tomi Valkeinen
2026-09-07 10:37 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 02/11] media: rcar-vin: Link VINs on Gen3 to a single channel on each CSI-2 Tomi Valkeinen
2026-06-17 11:54 ` [PATCH v6 03/11] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2026-09-07 11:30 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 04/11] media: rcar-csi2: " Tomi Valkeinen
2026-09-07 11:33 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 05/11] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2026-09-07 12:39 ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 06/11] media: rcar-isp: " Tomi Valkeinen
2026-09-07 13:29 ` Niklas Söderlund [this message]
2026-06-17 11:55 ` [PATCH v6 07/11] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2026-09-07 12:45 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 08/11] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2026-09-07 14:45 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 09/11] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2026-09-07 12:46 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 10/11] media: rcar-csi2: Add full streams support Tomi Valkeinen
2026-09-07 12:48 ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 11/11] media: rcar-isp: " Tomi Valkeinen
2026-09-07 19:21 ` Niklas Söderlund
2026-09-07 19:25 ` [PATCH v6 00/11] media: rcar: Streams support Niklas Söderlund
2026-09-08 6:28 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260907132906.GJ3497753@ragnatech.se \
--to=niklas.soderlund@ragnatech.se \
--cc=jacopo.mondi@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen+renesas@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox