Linux Media Controller development
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Subject: Re: [PATCH v6 03/11] media: rcar-isp: Move {enable|disable}_streams() calls
Date: Mon, 7 Sep 2026 13:30:09 +0200	[thread overview]
Message-ID: <20260907113009.GD3497753@ragnatech.se> (raw)
In-Reply-To: <20260617-rcar-streams-v6-3-1260eb72dff7@ideasonboard.com>

Hi Tomi,

Thanks for your patch.

On 2026-06-17 14:54:56 +0300, Tomi Valkeinen wrote:
> With multiple streams the operation to enable the ISP hardware and to
> call {enable|disable}_streams() on upstream subdev will need to be
> handled separately.
> 
> Prepare for that by moving {enable|disable}_streams() calls out from
> risp_start() and risp_stop().
> 
> On Gen4, a side effect of this change is that if the sink side devices
> call .enable_streams() on rcar-isp multiple times, the second call will
> fail. This is because we always use stream ID 0, so the second call
> would attempt to enable the same stream again, leading to an error. In
> other words, a normal single-stream setup continues to work, but trying
> to use the current driver's custom VC based routing will fail.
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/renesas/rcar-isp/csisp.c | 27 ++++++++++++++++---------
>  1 file changed, 17 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> index 8fb2cc3b5650..58a9a3bd9f75 100644
> --- a/drivers/media/platform/renesas/rcar-isp/csisp.c
> +++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
> @@ -268,18 +268,11 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
>  	/* Start ISP. */
>  	risp_write_cs(isp, ISPSTART_REG, ISPSTART_START);
>  
> -	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
> -					 BIT_ULL(0));
> -	if (ret)
> -		risp_power_off(isp);
> -
> -	return ret;
> +	return 0;
>  }
>  
>  static void risp_stop(struct rcar_isp *isp)
>  {
> -	v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, BIT_ULL(0));
> -
>  	/* Stop ISP. */
>  	risp_write_cs(isp, ISPSTART_REG, ISPSTART_STOP);
>  
> @@ -291,7 +284,7 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
>  			       u64 source_streams_mask)
>  {
>  	struct rcar_isp *isp = sd_to_isp(sd);
> -	int ret = 0;
> +	int ret;
>  
>  	if (source_streams_mask != 1)
>  		return -EINVAL;
> @@ -305,9 +298,17 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
>  			return ret;
>  	}
>  
> +	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
> +					 BIT_ULL(0));
> +	if (ret) {
> +		if (isp->stream_count == 0)
> +			risp_stop(isp);
> +		return ret;
> +	}
> +
>  	isp->stream_count += 1;
>  
> -	return ret;
> +	return 0;
>  }
>  
>  static int risp_disable_streams(struct v4l2_subdev *sd,
> @@ -315,6 +316,7 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
>  				u64 source_streams_mask)
>  {
>  	struct rcar_isp *isp = sd_to_isp(sd);
> +	int ret;
>  
>  	if (source_streams_mask != 1)
>  		return -EINVAL;
> @@ -322,6 +324,11 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
>  	if (!isp->remote)
>  		return -ENODEV;
>  
> +	ret = v4l2_subdev_disable_streams(isp->remote, isp->remote_pad,
> +					  BIT_ULL(0));
> +	if (ret)
> +		return ret;
> +
>  	if (isp->stream_count == 1)
>  		risp_stop(isp);
>  
> 
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund

  reply	other threads:[~2026-09-07 11:30 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-17 11:54 [PATCH v6 00/11] media: rcar: Streams support Tomi Valkeinen
2026-06-17 11:54 ` [PATCH v6 01/11] media: rcar-vin: Fix comment related to stride handling Tomi Valkeinen
2026-09-07 10:37   ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 02/11] media: rcar-vin: Link VINs on Gen3 to a single channel on each CSI-2 Tomi Valkeinen
2026-06-17 11:54 ` [PATCH v6 03/11] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2026-09-07 11:30   ` Niklas Söderlund [this message]
2026-06-17 11:54 ` [PATCH v6 04/11] media: rcar-csi2: " Tomi Valkeinen
2026-09-07 11:33   ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 05/11] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2026-09-07 12:39   ` Niklas Söderlund
2026-06-17 11:54 ` [PATCH v6 06/11] media: rcar-isp: " Tomi Valkeinen
2026-09-07 13:29   ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 07/11] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2026-09-07 12:45   ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 08/11] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2026-09-07 14:45   ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 09/11] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2026-09-07 12:46   ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 10/11] media: rcar-csi2: Add full streams support Tomi Valkeinen
2026-09-07 12:48   ` Niklas Söderlund
2026-06-17 11:55 ` [PATCH v6 11/11] media: rcar-isp: " Tomi Valkeinen
2026-09-07 19:21   ` Niklas Söderlund
2026-09-07 19:25 ` [PATCH v6 00/11] media: rcar: Streams support Niklas Söderlund
2026-09-08  6:28   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260907113009.GD3497753@ragnatech.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen+renesas@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox