From: Jayachandran C <jchandra@broadcom.com>
To: <linux-mips@linux-mips.org>
Cc: Jayachandran C <jchandra@broadcom.com>, <ralf@linux-mips.org>
Subject: [PATCH 00/18] Broadcom XLP Updates for 3.14
Date: Sat, 21 Dec 2013 16:52:12 +0530 [thread overview]
Message-ID: <1387624950-31297-1-git-send-email-jchandra@broadcom.com> (raw)
The main change is to support the XLP9XX processor family:
http://www.broadcom.com/products/Processors/Enterprise/XLP900-Series
The other changes (patches 1-7) are updates to the existing XLP code,
changes are to :
* add MSI/MSI-X support for XLP PCIe interface,
* add topology.h for XLP,
* do some few minor fixes and cleanups.
JC.
Ganesan Ramalingam (1):
MIPS: Netlogic: XLP9XX USB support
Jayachandran C (16):
MIPS: Netlogic: Add MSI support for XLP
MIPS: Netlogic: Add topology.h for XLP family
MIPS: Netlogic: Some cleanups for assembly code
MIPS: Netlogic: Add macro for node present
MIPS: Netlogic: Get coremask from FUSE register
MIPS: Netlogic: Core wakeup improvements
MIPS: Netlogic: Identify XLP 9XX chip
MIPS: Netlogic: update iomap.h for XLP9XX
MIPS: Netlogic: XLP9XX PIC updates
MIPS: Netlogic: SYS block updates of XLP9XX
MIPS: Netlogic: XLP9XX UART offset
MIPS: Netlogic: XLP9XX bridge and DRAM code
MIPS: Netlogic: Add cpu to node mapping for XLP9XX
MIPS: PCI: Netlogic XLP9XX support
MIPS: Netlogic: XLP9XX PIC OF support
MIPS: Netlogic: Add default DTB for XLP9XX SoC
Yonghong Song (1):
MIPS: Netlogic: L1D cacheflush before thread enable on XLPII
arch/mips/Kconfig | 1 +
arch/mips/include/asm/cpu.h | 1 +
arch/mips/include/asm/mach-netlogic/irq.h | 3 +-
arch/mips/include/asm/mach-netlogic/multi-node.h | 33 +-
arch/mips/include/asm/mach-netlogic/topology.h | 20 +
arch/mips/include/asm/netlogic/common.h | 24 +-
arch/mips/include/asm/netlogic/mips-extns.h | 7 +-
arch/mips/include/asm/netlogic/xlp-hal/bridge.h | 69 ++-
arch/mips/include/asm/netlogic/xlp-hal/iomap.h | 48 ++-
arch/mips/include/asm/netlogic/xlp-hal/pcibus.h | 41 +-
arch/mips/include/asm/netlogic/xlp-hal/pic.h | 77 ++--
arch/mips/include/asm/netlogic/xlp-hal/sys.h | 18 +-
arch/mips/include/asm/netlogic/xlp-hal/uart.h | 3 +-
arch/mips/include/asm/netlogic/xlp-hal/xlp.h | 38 +-
arch/mips/kernel/cpu-probe.c | 1 +
arch/mips/netlogic/Kconfig | 9 +
arch/mips/netlogic/common/earlycons.c | 2 +
arch/mips/netlogic/common/irq.c | 72 +++-
arch/mips/netlogic/common/reset.S | 62 ++-
arch/mips/netlogic/common/smp.c | 8 +-
arch/mips/netlogic/common/smpboot.S | 3 +-
arch/mips/netlogic/dts/Makefile | 1 +
arch/mips/netlogic/dts/xlp_gvp.dts | 76 ++++
arch/mips/netlogic/xlp/dt.c | 7 +-
arch/mips/netlogic/xlp/nlm_hal.c | 71 +++-
arch/mips/netlogic/xlp/setup.c | 25 +-
arch/mips/netlogic/xlp/usb-init-xlp2.c | 88 +++-
arch/mips/netlogic/xlp/wakeup.c | 91 +++-
arch/mips/netlogic/xlr/wakeup.c | 2 +-
arch/mips/pci/Makefile | 1 +
arch/mips/pci/msi-xlp.c | 494 ++++++++++++++++++++++
arch/mips/pci/pci-xlp.c | 110 +++--
32 files changed, 1279 insertions(+), 227 deletions(-)
create mode 100644 arch/mips/include/asm/mach-netlogic/topology.h
create mode 100644 arch/mips/netlogic/dts/xlp_gvp.dts
create mode 100644 arch/mips/pci/msi-xlp.c
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Jayachandran C <jchandra@broadcom.com>
To: linux-mips@linux-mips.org
Cc: Jayachandran C <jchandra@broadcom.com>, ralf@linux-mips.org
Subject: [PATCH 00/18] Broadcom XLP Updates for 3.14
Date: Sat, 21 Dec 2013 16:52:12 +0530 [thread overview]
Message-ID: <1387624950-31297-1-git-send-email-jchandra@broadcom.com> (raw)
Message-ID: <20131221112212.FvCDZS_XEn-8XNt26icuDR45TaX2LrfIpLntFDuhyR8@z> (raw)
The main change is to support the XLP9XX processor family:
http://www.broadcom.com/products/Processors/Enterprise/XLP900-Series
The other changes (patches 1-7) are updates to the existing XLP code,
changes are to :
* add MSI/MSI-X support for XLP PCIe interface,
* add topology.h for XLP,
* do some few minor fixes and cleanups.
JC.
Ganesan Ramalingam (1):
MIPS: Netlogic: XLP9XX USB support
Jayachandran C (16):
MIPS: Netlogic: Add MSI support for XLP
MIPS: Netlogic: Add topology.h for XLP family
MIPS: Netlogic: Some cleanups for assembly code
MIPS: Netlogic: Add macro for node present
MIPS: Netlogic: Get coremask from FUSE register
MIPS: Netlogic: Core wakeup improvements
MIPS: Netlogic: Identify XLP 9XX chip
MIPS: Netlogic: update iomap.h for XLP9XX
MIPS: Netlogic: XLP9XX PIC updates
MIPS: Netlogic: SYS block updates of XLP9XX
MIPS: Netlogic: XLP9XX UART offset
MIPS: Netlogic: XLP9XX bridge and DRAM code
MIPS: Netlogic: Add cpu to node mapping for XLP9XX
MIPS: PCI: Netlogic XLP9XX support
MIPS: Netlogic: XLP9XX PIC OF support
MIPS: Netlogic: Add default DTB for XLP9XX SoC
Yonghong Song (1):
MIPS: Netlogic: L1D cacheflush before thread enable on XLPII
arch/mips/Kconfig | 1 +
arch/mips/include/asm/cpu.h | 1 +
arch/mips/include/asm/mach-netlogic/irq.h | 3 +-
arch/mips/include/asm/mach-netlogic/multi-node.h | 33 +-
arch/mips/include/asm/mach-netlogic/topology.h | 20 +
arch/mips/include/asm/netlogic/common.h | 24 +-
arch/mips/include/asm/netlogic/mips-extns.h | 7 +-
arch/mips/include/asm/netlogic/xlp-hal/bridge.h | 69 ++-
arch/mips/include/asm/netlogic/xlp-hal/iomap.h | 48 ++-
arch/mips/include/asm/netlogic/xlp-hal/pcibus.h | 41 +-
arch/mips/include/asm/netlogic/xlp-hal/pic.h | 77 ++--
arch/mips/include/asm/netlogic/xlp-hal/sys.h | 18 +-
arch/mips/include/asm/netlogic/xlp-hal/uart.h | 3 +-
arch/mips/include/asm/netlogic/xlp-hal/xlp.h | 38 +-
arch/mips/kernel/cpu-probe.c | 1 +
arch/mips/netlogic/Kconfig | 9 +
arch/mips/netlogic/common/earlycons.c | 2 +
arch/mips/netlogic/common/irq.c | 72 +++-
arch/mips/netlogic/common/reset.S | 62 ++-
arch/mips/netlogic/common/smp.c | 8 +-
arch/mips/netlogic/common/smpboot.S | 3 +-
arch/mips/netlogic/dts/Makefile | 1 +
arch/mips/netlogic/dts/xlp_gvp.dts | 76 ++++
arch/mips/netlogic/xlp/dt.c | 7 +-
arch/mips/netlogic/xlp/nlm_hal.c | 71 +++-
arch/mips/netlogic/xlp/setup.c | 25 +-
arch/mips/netlogic/xlp/usb-init-xlp2.c | 88 +++-
arch/mips/netlogic/xlp/wakeup.c | 91 +++-
arch/mips/netlogic/xlr/wakeup.c | 2 +-
arch/mips/pci/Makefile | 1 +
arch/mips/pci/msi-xlp.c | 494 ++++++++++++++++++++++
arch/mips/pci/pci-xlp.c | 110 +++--
32 files changed, 1279 insertions(+), 227 deletions(-)
create mode 100644 arch/mips/include/asm/mach-netlogic/topology.h
create mode 100644 arch/mips/netlogic/dts/xlp_gvp.dts
create mode 100644 arch/mips/pci/msi-xlp.c
--
1.7.9.5
next reply other threads:[~2013-12-21 11:10 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-21 11:22 Jayachandran C [this message]
2013-12-21 11:22 ` [PATCH 00/18] Broadcom XLP Updates for 3.14 Jayachandran C
2013-12-21 11:22 ` [PATCH 01/18] MIPS: Netlogic: Add MSI support for XLP Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 02/18] MIPS: Netlogic: Add topology.h for XLP family Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 03/18] MIPS: Netlogic: Some cleanups for assembly code Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 04/18] MIPS: Netlogic: L1D cacheflush before thread enable on XLPII Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 05/18] MIPS: Netlogic: Add macro for node present Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 06/18] MIPS: Netlogic: Get coremask from FUSE register Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 07/18] MIPS: Netlogic: Core wakeup improvements Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 08/18] MIPS: Netlogic: Identify XLP 9XX chip Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 09/18] MIPS: Netlogic: update iomap.h for XLP9XX Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 10/18] MIPS: Netlogic: XLP9XX PIC updates Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 11/18] MIPS: Netlogic: SYS block updates of XLP9XX Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 12/18] MIPS: Netlogic: XLP9XX UART offset Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 17:35 ` John Crispin
2013-12-25 7:07 ` Jayachandran C.
2013-12-25 7:07 ` Jayachandran C.
2013-12-21 11:22 ` [PATCH 13/18] MIPS: Netlogic: XLP9XX bridge and DRAM code Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 14/18] MIPS: Netlogic: Add cpu to node mapping for XLP9XX Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 15/18] MIPS: PCI: Netlogic XLP9XX support Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 16/18] MIPS: Netlogic: XLP9XX USB support Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 17/18] MIPS: Netlogic: XLP9XX PIC OF support Jayachandran C
2013-12-21 11:22 ` Jayachandran C
2013-12-21 11:22 ` [PATCH 18/18] MIPS: Netlogic: Add default DTB for XLP9XX SoC Jayachandran C
2013-12-21 11:22 ` Jayachandran C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387624950-31297-1-git-send-email-jchandra@broadcom.com \
--to=jchandra@broadcom.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox