* RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
@ 1998-06-14 4:44 Alex deVries
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 20:25 ` RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Tomi Leppikangas
0 siblings, 2 replies; 15+ messages in thread
From: Alex deVries @ 1998-06-14 4:44 UTC (permalink / raw)
To: SGI Linux; +Cc: wanger, ewt
It's here!
Well, it is uploading. There are definite problems, but it works
reasonably well for me. Please let me know if you use this. You can get
everything from ftp.linux.sgi.com:/pub/redhat/redhat-5.1.
We need to sort out some issues with how to actually download it from the
'net...
Instructions are below.
Ugh, I'm glad this is out there. I'm taking tomorrow off.
--
Alex deVries, puffin on LinuxNet.
http://www.engsoc.carleton.ca/~adevries/ .
Red Hat 5.1 (Manhattan) for SGI Indy's version 5.1 ALPHA 1
----------------------------------------------------------
This is neither a product of Red Hat nor of SGI.
These are instructions on how to get the unofficial port of Red Hat
version 5.1 running on your Indy.
Stuff you'll need:
- an SGI Indy. At this point, I'd STRONGLY recommend having a seperate
disk for Linux.
- You need to have your Linux disk partitioned from within Irix.
- You need Irix on the machine in order to install the boot image. Yes,
we're working on this.
- another host to bootp/tftp/NFS root from. For this example I'll assume
that you're using a Red Hat Linux i386 system, although other
configurations will be possible.
- a lot of patience.
You are strongly encouraged to report problems and feedback back to Alex
deVries <adevries@engsoc.carleton.ca>
Alright. Here's what you need to do to get this all running:
1. Server side.
On your i386, setup the following:
a) Setup tftp
You need to have the following lines configured in your /etc/inetd.conf:
tftp dgram udp wait root /usr/sbin/tcpd in.tftpd \
/usr/src/sgi/installfs/
bootps dgram udp wait root /usr/sbin/bootpd /etc/bootptab
I'm using /usr/src/sgi/installfs for all my file placement. You can
choose something else if youwant.
After changing that, restart inetd with something like
/etc/rc.d/init.d/inetd restart.
b) Setup bootp
You need to setup your /etc/bootptab file to contain:
alex3:hd=/usr/src/sgi/installfs:\
:rp=/usr/src/sgi/installfs:\
:ht=ethernet:\
:ha=080069088717:\
:ip=140.244.9.208:\
:bf=vmlinux:\
:sm=255.255.255.0:\
:to=7200:
Here, alex3 is the name of the SGI host, 080069088717 is the mac address
of the SGI which you'll have to get from Irix, and 140.244.9.208 is the
address of the SGI/Linux box. Modify to taste.
c) Setup root NFS permissions
Ensure that in your /etc/exports you have something like:
/usr/src/sgi/installfs 140.244.9.208(no_root_squash,rw)
d) copy all the files
Take all the installation files from
ftp.linux.sgi.com:/pub/redhat/redhat-5.1 and put them in
/usr/src/sgi/installfs. Yes, you'll need to preserve permissions.
2. Configure your disks
With Irix tools, create an EFS partition on your Linux disk. At this
point, a swap partition won't be recognized. Yes, we're working on it.
3. Start the install
Alright. This is the fun part. Assuming all your bootp/tftp/nfs root
stuff is working properly, you should be able to just go into the command
monitor (boot manager) and go:
boot bootp():/vmlinux
You should see the kernel load, and install should run.
4. The actual install
Just go through the dialog boxes. A few notes:
- any references to partitioning don't actually work
- you will see funny partitions when it asks you to set a mount point. Do
actually set a mount point, though. Remember that Irix has the concept of
volume headers, so you typically want to take the *first* and slightly
smaller partition for your / filesystem.
- ignore the dependancies errors, yes, we'll get to it too.
- you'll get a lot of warnings once the install starts saying:
"RPM install of diffutils failed: execution of script failed". We're
working on it. Just hit Ok.
5. Configure your kernel
Boot in Irix, then copy over vmlinux which is in
/usr/src/sgi/installfs/vmlinux to the / of your Irix filesystem. Then,
from within the boot manager, you should be able to boot with:
boot vmlinux root=/dev/sdb1
Presto!
6. Last, but not least
Let us know if it worked!
Stuff that we're working on:
- Sorting out the problems with the installer not running the scripts.
It's bloody annoying hitting return 50 times in the install. rpm-devel
is suspect so far.
- filling in the missing packages, including XFree86
- disk partitioning
- being able to install a kernel without having to have Irix around.
- swap partition support in the setup
- trim down the install filesystem, it is enormous
- creating a CREDITS file
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-14 4:44 RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Alex deVries
@ 1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 16:07 ` Alex deVries
1998-06-16 20:25 ` RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Tomi Leppikangas
1 sibling, 2 replies; 15+ messages in thread
From: Honza Pazdziora @ 1998-06-16 15:46 UTC (permalink / raw)
To: Alex deVries; +Cc: linux
>
> 6. Last, but not least
>
> Let us know if it worked!
Great! It worked. I mean: it worked!
I've installed it from our mirror at ftp.fi.muni.cz to an old 300 MB
disk. After some fiddling with the ftp server to support tftp
correctly and after one crash with some message about signal 11
(caused by the disk, I believe) it's now installed and running.
Some comments out of my head:
The /usr/sbin/timeconfig failed in the menu -- it doesn't seem to be
present in the installfs -- shall I find and compile it?
I've set up root password in the menu but it wasn't there after
reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
I had to install gcc from RH 5.0.
Mkswap failed with segmantation fault -- shall I send the register
output? I will try to compile my own, but the machine is slow without
swap, and I need to compile ssh first to get reasonable remote access.
Once this is done, we might be able to provide ssh*.mips.rpm, if you
are interested.
It might be nice to put the notice about this 5.1 on the web, so that
people are directed to the new stuff -- even this, plain text announce
and instructions would be nice.
As I have the system on a disk, it's much happier and it starts to
look really reasonably. I will boot my machine to Linux and run the
compilations of ssh and linux-utils (for mkswap) overnight. If there
is anything I can compile/test/do to help you, please let me know.
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-16 15:46 ` Honza Pazdziora
@ 1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 16:07 ` Alex deVries
1 sibling, 0 replies; 15+ messages in thread
From: Honza Pazdziora @ 1998-06-16 15:46 UTC (permalink / raw)
To: Alex deVries; +Cc: linux
>
> 6. Last, but not least
>
> Let us know if it worked!
Great! It worked. I mean: it worked!
I've installed it from our mirror at ftp.fi.muni.cz to an old 300 MB
disk. After some fiddling with the ftp server to support tftp
correctly and after one crash with some message about signal 11
(caused by the disk, I believe) it's now installed and running.
Some comments out of my head:
The /usr/sbin/timeconfig failed in the menu -- it doesn't seem to be
present in the installfs -- shall I find and compile it?
I've set up root password in the menu but it wasn't there after
reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
I had to install gcc from RH 5.0.
Mkswap failed with segmantation fault -- shall I send the register
output? I will try to compile my own, but the machine is slow without
swap, and I need to compile ssh first to get reasonable remote access.
Once this is done, we might be able to provide ssh*.mips.rpm, if you
are interested.
It might be nice to put the notice about this 5.1 on the web, so that
people are directed to the new stuff -- even this, plain text announce
and instructions would be nice.
As I have the system on a disk, it's much happier and it starts to
look really reasonably. I will boot my machine to Linux and run the
compilations of ssh and linux-utils (for mkswap) overnight. If there
is anything I can compile/test/do to help you, please let me know.
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 15:46 ` Honza Pazdziora
@ 1998-06-16 16:07 ` Alex deVries
1998-06-16 18:25 ` Honza Pazdziora
1998-06-24 13:04 ` Daniel Veillard
1 sibling, 2 replies; 15+ messages in thread
From: Alex deVries @ 1998-06-16 16:07 UTC (permalink / raw)
To: Honza Pazdziora; +Cc: linux
On Tue, 16 Jun 1998, Honza Pazdziora wrote:
> > 6. Last, but not least
> > Let us know if it worked!
> Great! It worked. I mean: it worked!
Wuhoo!
> Some comments out of my head:
> The /usr/sbin/timeconfig failed in the menu -- it doesn't seem to be
> present in the installfs -- shall I find and compile it?
I'll fix that right now... thanks.
> I've set up root password in the menu but it wasn't there after
> reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
Do you mean that /etc/passwd didn't exist at all?
> I had to install gcc from RH 5.0.
Yup. That's because I just forgot to put gcc in there altogether. That'll
be fixed.
> Mkswap failed with segmantation fault -- shall I send the register
> output? I will try to compile my own, but the machine is slow without
> swap, and I need to compile ssh first to get reasonable remote access.
> Once this is done, we might be able to provide ssh*.mips.rpm, if you
> are interested.
Do you mean that mkswap segfaulted during install, or after? I'll have a
closer look. The util-linux we're using is a little old.
> It might be nice to put the notice about this 5.1 on the web, so that
> people are directed to the new stuff -- even this, plain text announce
> and instructions would be nice.
Definitely. I will do that, although I welcome any help with documenting
this.
We actually already have ssh on ftp.replay.com, IIRC. I'm in the US
(sigh...) so I can't export it.
If you were interested, you could have a look at getting a util-linux RPM
up to version 2.8. util-linux is a gross thing.
- Alex
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-16 16:07 ` Alex deVries
@ 1998-06-16 18:25 ` Honza Pazdziora
1998-06-16 18:25 ` Honza Pazdziora
1998-06-24 13:04 ` Daniel Veillard
1 sibling, 1 reply; 15+ messages in thread
From: Honza Pazdziora @ 1998-06-16 18:25 UTC (permalink / raw)
To: Alex deVries; +Cc: adelton, linux
>
> > I've set up root password in the menu but it wasn't there after
> > reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
>
> Do you mean that /etc/passwd didn't exist at all?
Right. I can repeat the installation from the scratch tomorrow and
have closer look at the other consoles. But neither passwd, nor shadow
existed.
> Do you mean that mkswap segfaulted during install, or after? I'll have a
> closer look. The util-linux we're using is a little old.
I'm not sure what happened during install -- I just wanted to have it
done to see the real prompt ;-) But when I tried mkswap /dev/sdb2 on
the prompt, it said something about freeing free buffer? (or whatever)
and then gave register dump. Sorry, I'm at home and can't get to the
machine because sshd isn't running there yet, so I will send the exact
output tomorrow.
> We actually already have ssh on ftp.replay.com, IIRC. I'm in the US
> (sigh...) so I can't export it.
No problem, I thing we can add mips.rpm to out ssh mirror.
> If you were interested, you could have a look at getting a util-linux RPM
> up to version 2.8. util-linux is a gross thing.
OK, I'll try.
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-16 18:25 ` Honza Pazdziora
@ 1998-06-16 18:25 ` Honza Pazdziora
0 siblings, 0 replies; 15+ messages in thread
From: Honza Pazdziora @ 1998-06-16 18:25 UTC (permalink / raw)
To: Alex deVries; +Cc: adelton, linux
>
> > I've set up root password in the menu but it wasn't there after
> > reboot -- not even /etc/passwd -- I had to boot init=/bin/bash.
>
> Do you mean that /etc/passwd didn't exist at all?
Right. I can repeat the installation from the scratch tomorrow and
have closer look at the other consoles. But neither passwd, nor shadow
existed.
> Do you mean that mkswap segfaulted during install, or after? I'll have a
> closer look. The util-linux we're using is a little old.
I'm not sure what happened during install -- I just wanted to have it
done to see the real prompt ;-) But when I tried mkswap /dev/sdb2 on
the prompt, it said something about freeing free buffer? (or whatever)
and then gave register dump. Sorry, I'm at home and can't get to the
machine because sshd isn't running there yet, so I will send the exact
output tomorrow.
> We actually already have ssh on ftp.replay.com, IIRC. I'm in the US
> (sigh...) so I can't export it.
No problem, I thing we can add mips.rpm to out ssh mirror.
> If you were interested, you could have a look at getting a util-linux RPM
> up to version 2.8. util-linux is a gross thing.
OK, I'll try.
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-14 4:44 RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Alex deVries
1998-06-16 15:46 ` Honza Pazdziora
@ 1998-06-16 20:25 ` Tomi Leppikangas
1998-06-18 0:28 ` Alex deVries
1 sibling, 1 reply; 15+ messages in thread
From: Tomi Leppikangas @ 1998-06-16 20:25 UTC (permalink / raw)
To: linux
Hi,
I tryed to install that new 5.1 redhad tonight, but installation
stops when selecting partitions, i cant make swap partition,
and installation wont continue without any swap.
I partitioned second disk in irix, and in boot linux finds it,
but both partitions are 'linux native', i cant change them to
'linux swap' becouse fdisk segfaults in installation. Should that
fdisk work? Could that segfault be becouse i have two disks, one
id=0 and second id=3.
Any way to install it without swap? Or how to force sdb2
to be swap partition?
In that announcment posting there was 'copy all files from...',
i just copied "installfs.tgz" and untar it, is all files in that?
--
## Tomi.Leppikangas@oulu.fi ##
## http://www.student.oulu.fi/~tomilepp/ ##
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-16 20:25 ` RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Tomi Leppikangas
@ 1998-06-18 0:28 ` Alex deVries
0 siblings, 0 replies; 15+ messages in thread
From: Alex deVries @ 1998-06-18 0:28 UTC (permalink / raw)
To: Tomi.Leppikangas; +Cc: linux
On Tue, 16 Jun 1998, Tomi Leppikangas wrote:
> I tryed to install that new 5.1 redhad tonight, but installation
> stops when selecting partitions, i cant make swap partition,
> and installation wont continue without any swap.
> I partitioned second disk in irix, and in boot linux finds it,
> but both partitions are 'linux native', i cant change them to
> 'linux swap' becouse fdisk segfaults in installation. Should that
> fdisk work? Could that segfault be becouse i have two disks, one
> id=0 and second id=3.
As mentioned in the isntructions, all the partitioning needs to be done
from Irix. Yes, we're working on this.
> Any way to install it without swap? Or how to force sdb2
> to be swap partition?
There's a dialog box that asks you if you want to use swap; just say no.
There's swap problems right now.
> In that announcment posting there was 'copy all files from...',
> i just copied "installfs.tgz" and untar it, is all files in that?
Yup.
- Alex
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-16 16:07 ` Alex deVries
1998-06-16 18:25 ` Honza Pazdziora
@ 1998-06-24 13:04 ` Daniel Veillard
1998-06-24 19:22 ` Alex deVries
1998-07-09 13:17 ` Lmbench for RH 5.1 Honza Pazdziora
1 sibling, 2 replies; 15+ messages in thread
From: Daniel Veillard @ 1998-06-24 13:04 UTC (permalink / raw)
To: Alex deVries; +Cc: linux
Alex,
while creating the mirror of the distribution at:
ftp://rufus.w3.org/linux/SGILinux/redhat-5.1/
I got the following errors:
-----
Failure on 'RETR etc/ioctl.save' command
Failed to get etc/ioctl.save: 550 etc/ioctl.save: Permission denied.
Failed to get file 550 etc/ioctl.save: Permission denied.
-----
Failure on 'RETR sbin/pam_filter/upperLOWER' command
Failed to get sbin/pam_filter/upperLOWER: 550 sbin/pam_filter/upperLOWER: Permission denied.
Failed to get file 550 sbin/pam_filter/upperLOWER: Permission denied.
-----
I also noticed a couple of .rpmorig files in /etc :-)
Daniel
--
Daniel.Veillard@w3.org | W3C MIT/LCS NE43-344 | Today's Bookmarks :
Tel : +1 617 253 5884 | 545 Technology Square | Linux, WWW, rpm2html,
Fax : +1 617 258 5999 | Cambridge, MA 02139 USA | badminton, Kaffe,
http://www.w3.org/People/W3Cpeople.html#Veillard | HTTP-NG and Amaya.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
1998-06-24 13:04 ` Daniel Veillard
@ 1998-06-24 19:22 ` Alex deVries
1998-07-09 13:17 ` Lmbench for RH 5.1 Honza Pazdziora
1 sibling, 0 replies; 15+ messages in thread
From: Alex deVries @ 1998-06-24 19:22 UTC (permalink / raw)
To: Daniel Veillard, Bryce; +Cc: linux
Alright, alright! After just one and a half weeks of complaints, I've
fixed the problem.
Clearly, the installation file system is a mess; I will sort that out for
Alpha 2.
... and I've now rebuilt all the RH 5.1 RPMs with proper dependancies.
- Alex
--
Alex deVries, puffin on LinuxNet.
http://www.engsoc.carleton.ca/~adevries/ .
On Wed, 24 Jun 1998, Daniel Veillard wrote:
> Date: Wed, 24 Jun 1998 09:04:39 -0400
> From: Daniel Veillard <Daniel.Veillard@w3.org>
> To: Alex deVries <adevries@engsoc.carleton.ca>
> Cc: linux@cthulhu.engr.sgi.com
> Subject: Re: RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys
>
> Alex,
>
> while creating the mirror of the distribution at:
>
> ftp://rufus.w3.org/linux/SGILinux/redhat-5.1/
>
> I got the following errors:
> -----
> Failure on 'RETR etc/ioctl.save' command
> Failed to get etc/ioctl.save: 550 etc/ioctl.save: Permission denied.
> Failed to get file 550 etc/ioctl.save: Permission denied.
> -----
> Failure on 'RETR sbin/pam_filter/upperLOWER' command
> Failed to get sbin/pam_filter/upperLOWER: 550 sbin/pam_filter/upperLOWER: Permission denied.
> Failed to get file 550 sbin/pam_filter/upperLOWER: Permission denied.
> -----
> I also noticed a couple of .rpmorig files in /etc :-)
>
> Daniel
>
> --
> Daniel.Veillard@w3.org | W3C MIT/LCS NE43-344 | Today's Bookmarks :
> Tel : +1 617 253 5884 | 545 Technology Square | Linux, WWW, rpm2html,
> Fax : +1 617 258 5999 | Cambridge, MA 02139 USA | badminton, Kaffe,
> http://www.w3.org/People/W3Cpeople.html#Veillard | HTTP-NG and Amaya.
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Lmbench for RH 5.1
1998-06-24 13:04 ` Daniel Veillard
1998-06-24 19:22 ` Alex deVries
@ 1998-07-09 13:17 ` Honza Pazdziora
1998-07-09 13:39 ` ralf
1 sibling, 1 reply; 15+ messages in thread
From: Honza Pazdziora @ 1998-07-09 13:17 UTC (permalink / raw)
To: linux
Hello,
I wanted to do benchmarks on my Indy. The versions 1.0 and 1.1 fail
when compiling lat_ctx.c with assembler messages:
Error: Branch out of range on lines 4189 and 40323. When I try to
compile it with -O2, it starts optimizing but doesn't seem to finish.
The version 2beta6 of lmbench complains about missing
linux/autoconf.h.
This is RH 5.1 Alpha 1 installer with Alpha 2 RPM's placed over the
Alpha 1 ones, with gcc from redhat-5.0 (Alex, we should put gcc
to the distribution). Do you have any idea what to do with any
of these problems? Or do you have precompiled lmbench somewhere?
Thanks,
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Lmbench for RH 5.1
1998-07-09 13:17 ` Lmbench for RH 5.1 Honza Pazdziora
@ 1998-07-09 13:39 ` ralf
1998-07-09 13:47 ` Honza Pazdziora
0 siblings, 1 reply; 15+ messages in thread
From: ralf @ 1998-07-09 13:39 UTC (permalink / raw)
To: Honza Pazdziora; +Cc: linux
On Thu, Jul 09, 1998 at 03:17:22PM +0200, Honza Pazdziora wrote:
> I wanted to do benchmarks on my Indy. The versions 1.0 and 1.1 fail
> when compiling lat_ctx.c with assembler messages:
> Error: Branch out of range on lines 4189 and 40323. When I try to
This is a GAS problem, I doesn't know how to express branches beyond the
16 bit range of a branch instruction as machine instructions. Newer
lmbench versions don't run into that GAS problem anymore.
> compile it with -O2, it starts optimizing but doesn't seem to finish.
Don't optimize lmbench, the compiler might decide to just throw parts
of lmbench away producing awsome results. lat_ctx optimized with -O2
hits GCC on one of it's weak points, it will finish to optimize but
will need very long.
> The version 2beta6 of lmbench complains about missing
> linux/autoconf.h.
You probably ran make distclean on the kernel source tree? Don't, best
leave the kernel source tree configured around, so just use make clean.
The question what is trying to use autoconf.h for what reason remains;
user code isn't supposed to use this file.
(Alex: the kernel source rpm should be installed configured, especially
including autoconf.h for compatibility.)
> This is RH 5.1 Alpha 1 installer with Alpha 2 RPM's placed over the
> Alpha 1 ones, with gcc from redhat-5.0 (Alex, we should put gcc
> to the distribution). Do you have any idea what to do with any
> of these problems? Or do you have precompiled lmbench somewhere?
No, because lmbench normally builds just out of the box.
(The networking code for the kernel which is going to ship with RH
has a couple of crude fixed due to lack of time, don't benchmark to
hard ...)
Ralf
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Lmbench for RH 5.1
1998-07-09 13:39 ` ralf
@ 1998-07-09 13:47 ` Honza Pazdziora
1998-07-09 13:53 ` ralf
0 siblings, 1 reply; 15+ messages in thread
From: Honza Pazdziora @ 1998-07-09 13:47 UTC (permalink / raw)
To: ralf; +Cc: linux
>
> > The version 2beta6 of lmbench complains about missing
> > linux/autoconf.h.
>
> You probably ran make distclean on the kernel source tree? Don't, best
> leave the kernel source tree configured around, so just use make clean.
>
> The question what is trying to use autoconf.h for what reason remains;
> user code isn't supposed to use this file.
Hmm, I got the default kernel from kernel/v2.1 and just unpacked it to
get the others *.h files (linux and asm). I do not have the SGI kernel
-- it is somewhere available? Alex said he will pack the sources as
RPM with configuration but I cannot find it on linus' ftp -- is it
somewhere there?
------------------------------------------------------------------------
Honza Pazdziora | adelton@fi.muni.cz | http://www.fi.muni.cz/~adelton/
I can take or leave it if I please
------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Lmbench for RH 5.1
1998-07-09 13:47 ` Honza Pazdziora
@ 1998-07-09 13:53 ` ralf
1998-07-09 16:06 ` Ulf Carlsson
0 siblings, 1 reply; 15+ messages in thread
From: ralf @ 1998-07-09 13:53 UTC (permalink / raw)
To: Honza Pazdziora; +Cc: linux
On Thu, Jul 09, 1998 at 03:47:13PM +0200, Honza Pazdziora wrote:
> > The question what is trying to use autoconf.h for what reason remains;
> > user code isn't supposed to use this file.
>
> Hmm, I got the default kernel from kernel/v2.1 and just unpacked it to
> get the others *.h files (linux and asm). I do not have the SGI kernel
> -- it is somewhere available? Alex said he will pack the sources as
> RPM with configuration but I cannot find it on linus' ftp -- is it
> somewhere there?
Of course it is available, this is free software! Snapshots from our CVS
and binaries are in /pub/test/; I think we currently only have them as
tarballs, not in rpm format. You can also access the CVS directly by
using anonymous CVS.
Ralf
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Lmbench for RH 5.1
1998-07-09 13:53 ` ralf
@ 1998-07-09 16:06 ` Ulf Carlsson
0 siblings, 0 replies; 15+ messages in thread
From: Ulf Carlsson @ 1998-07-09 16:06 UTC (permalink / raw)
To: ralf; +Cc: Honza Pazdziora, linux
On Thu, 9 Jul 1998 ralf@uni-koblenz.de wrote:
> On Thu, Jul 09, 1998 at 03:47:13PM +0200, Honza Pazdziora wrote:
>
> > > The question what is trying to use autoconf.h for what reason remains;
> > > user code isn't supposed to use this file.
> >
> > Hmm, I got the default kernel from kernel/v2.1 and just unpacked it to
> > get the others *.h files (linux and asm). I do not have the SGI kernel
> > -- it is somewhere available? Alex said he will pack the sources as
> > RPM with configuration but I cannot find it on linus' ftp -- is it
> > somewhere there?
>
> Of course it is available, this is free software! Snapshots from our CVS
> and binaries are in /pub/test/; I think we currently only have them as
> tarballs, not in rpm format. You can also access the CVS directly by
> using anonymous CVS.
The kernel source is availible in RPM format in
/pub/redhat/devel/RPMS/kernel-headers-2.1.99-0.1.mipseb.rpm
/pub/redhat/devel/RPMS/kernel-source-2.1.99-0.1.mipseb.rpm
I think kernel-headers-2.1.99-0.1.mipseb.rpm would be enough for your
needs. I have used this kernel source and it compiles fine with the gcc
cross compiler for x86.
FYI
- Ulf
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~1998-07-09 16:08 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1998-06-14 4:44 RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Alex deVries
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 15:46 ` Honza Pazdziora
1998-06-16 16:07 ` Alex deVries
1998-06-16 18:25 ` Honza Pazdziora
1998-06-16 18:25 ` Honza Pazdziora
1998-06-24 13:04 ` Daniel Veillard
1998-06-24 19:22 ` Alex deVries
1998-07-09 13:17 ` Lmbench for RH 5.1 Honza Pazdziora
1998-07-09 13:39 ` ralf
1998-07-09 13:47 ` Honza Pazdziora
1998-07-09 13:53 ` ralf
1998-07-09 16:06 ` Ulf Carlsson
1998-06-16 20:25 ` RedHat 5.1 (Manhattan) ALPHA 1 for SGI/Indys Tomi Leppikangas
1998-06-18 0:28 ` Alex deVries
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox