From: James Hogan <james.hogan@imgtec.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Justin Chen <justinpopo6@gmail.com>,
Justin Chen <justin.chen@broadcom.com>,
<linux-mips@linux-mips.org>,
Florian Fainelli <f.fainelli@gmail.com>,
<bcm-kernel-feedback-list@broadcom.com>,
Ralf Baechle <ralf@linux-mips.org>
Subject: Re: Crash in -next due to 'MIPS: Add cacheinfo support'
Date: Fri, 10 Feb 2017 10:39:52 +0000 [thread overview]
Message-ID: <20170210103952.GC24226@jhogan-linux.le.imgtec.org> (raw)
In-Reply-To: <20170210094011.GB24226@jhogan-linux.le.imgtec.org>
[-- Attachment #1: Type: text/plain, Size: 8864 bytes --]
On Fri, Feb 10, 2017 at 09:40:11AM +0000, James Hogan wrote:
> Hi Guenter,
>
> On Thu, Feb 09, 2017 at 08:50:04PM -0800, Guenter Roeck wrote:
> > On 02/09/2017 04:01 PM, Justin Chen wrote:
> > > Hello Guenter,
> > >
> > > I am unable to reproduce the problem. May you give me more details?
> > >
> > The scripts I am using are available at
> >
> > https://github.com/groeck/linux-build-test/tree/master/rootfs
> >
> > in the mips and mipsel subdirectories (both crash). Individual
> > build logs are always available at kerneltests.org/builders,
> > in the 'next' column.
>
> Did you find it 100% reproducible? I was trying to reproduce yesterday
> evening, and did hit it a few times, but then it stopped happening
> before I could try and figure out what was going wrong.
I switched to gcc 5.2 (buildroot toolchain) for building kernel, and now
it reproduces every time :)
Cheers
James
>
> I presume from your run-qemu-mipsel.sh script its a vanilla 2.7
> qemu-system-mipsel?
>
> Cheers
> James
>
> >
> > Note: If I build the image with my configuration, and run
> > your qemu command, I get a different crash:
> >
> > ...
> > ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
> > CPU 0 Unable to handle kernel paging request at virtual address fffffffc, epc == 80341d68, ra == 803eae70
> > Oops[#1]:
> > CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.0-rc7-next-20170209 #2
> > task: 8704b8a0 task.stack: 8704c000
> > $ 0 : 00000000 0000006f fffffffc 00000000
> > $ 4 : 87044980 8069ee48 8069ee49 00000004
> > $ 8 : 00000000 8741c990 00000000 00000040
> > $12 : 00000000 00000001 00000000 fffffffe
> > $16 : 8070ae14 80742fb8 80738190 00000000
> > $20 : 806e0000 8071c2fc 80770000 00000008
> > $24 : 00000110 00000000
> > $28 : 8704c000 8704fe10 80754728 803eae70
> > Hi : 0000000f
> > Lo : 8f8f8f9f
> > epc : 80341d68 kset_find_obj+0xc/0xa4
> > ra : 803eae70 driver_find+0x1c/0x48
> > Status: 1000a403 KERNEL EXL IE
> > Cause : 00800008 (ExcCode 02)
> > BadVA : fffffffc
> > PrId : 00019300 (MIPS 24Kc)
> > Modules linked in:
> > Process swapper (pid: 1, threadinfo=8704c000, task=8704b8a0, tls=00000000)
> > Stack : 80710000 00000000 806e0000 8044ba18 8070ae14 803eaf10 00000000 00000000
> > 80770000 80742fb8 80770000 80770000 80742fb8 801005dc 8708b900 810017e0
> > 8704fe68 806f0000 806ee894 81041c41 80600600 80141fb8 00000000 80740000
> > 806e0000 80720000 00000000 00000006 806765e4 00000006 00000017 80670000
> > 80676cf0 80680000 80770000 80742fb8 00000006 80742f98 80770000 80742fb8
> > ...
> > Call Trace:
> > [<80341d68>] kset_find_obj+0xc/0xa4
> > [<803eae70>] driver_find+0x1c/0x48
> > [<803eaf10>] driver_register+0x74/0x128
> > [<801005dc>] do_one_initcall+0x48/0x16c
> > [<8071cd18>] kernel_init_freeable+0x170/0x22c
> > [<805e1d30>] kernel_init+0x14/0x108
> > [<80105e18>] ret_from_kernel_thread+0x14/0x1c
> > Code: 8c830000 10830012 2462fffc <8c430000> 1060000c 00a03021 90670000 90c10000 24630001
> >
> > ---[ end trace c22dffa22f0b1376 ]---
> > Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> >
> > ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> >
> > Guenter
> >
> > > I rebased my patch onto of 4.10-rc7 and compiled with malta defconfig
> > > with disabled SMP. Then booted with qemu. Doesn't seem to have an
> > > error with the way I have it set up.
> > >
> > > I am using the command:
> > > qemu-system-mipsel -kernel vmlinux -nographic -smp 0
> > >
> > > Thanks,
> > > Justin
> > >
> > > On Wed, Feb 8, 2017 at 3:45 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> > >> Hi Justin,
> > >>
> > >> The 32-bit qemu mips runtime tests for -next at kerneltests.org are crashing
> > >> for non-SMP builds as follows.
> > >>
> > >> cacheinfo: Failed to find cpu0 device node
> > >> cacheinfo: Unable to detect cache hierarchy for CPU 0
> > >> CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc ==
> > >> 8013c6a8, ra == 8013cb54
> > >> Oops[#1]:
> > >> CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.10.0-rc7-next-20170208 #1
> > >> Workqueue: events_unbound call_usermodehelper_exec_work
> > >> task: 8704a420 task.stack: 87068000
> > >> $ 0 : 00000000 80770000 873a8204 8700c214
> > >> $ 4 : 00000000 873a8200 00000000 ffff00fe
> > >> $ 8 : 8706bfe0 0000a400 fffffffc 8704a459
> > >> $12 : 00000000 00000000 00000000 00000720
> > >> $16 : 873a8200 87045880 00000000 8700c200
> > >> $20 : 87014000 87014005 8700c200 8700c200
> > >> $24 : 00000000 8014d1e8
> > >> $28 : 87068000 8706be70 87045880 8013cb54
> > >> Hi : 00077698
> > >> Lo : ab801af8
> > >> epc : 8013c6a8 process_one_work+0xd4/0x408
> > >> ra : 8013cb54 worker_thread+0x178/0x598
> > >> Status: 1000a402 KERNEL EXL
> > >> Cause : 0080000c (ExcCode 03)
> > >> BadVA : 00000004
> > >> PrId : 00019300 (MIPS 24Kc)
> > >> Modules linked in:
> > >> Process kworker/u2:0 (pid: 5, threadinfo=87068000, task=8704a420, tls=00000000)
> > >> Stack : 80700000 8700c214 00000088 80700000 8700c200 8700c200 8700c200 87045898
> > >> 80700000 8700c214 00000088 80700000 8700c200 8013cb54 8013c9dc 8704fe00
> > >> 87045600 87045700 80700000 80700000 80700000 80676560 87045600 87045700
> > >> 87045618 87045880 8013c9dc 8704fe00 80670000 80760000 806e0000 80142958
> > >> 00000000 00000000 00000000 00000000 80142850 80142850 87045700 8704b380
> > >> ...
> > >> Call Trace:
> > >> [<8013c6a8>] process_one_work+0xd4/0x408
> > >> [<8013cb54>] worker_thread+0x178/0x598
> > >> [<80142958>] kthread+0x108/0x138
> > >> [<80105e18>] ret_from_kernel_thread+0x14/0x1c
> > >> Code: 8e030008 8e040004 8e150000 <ac830004> 7eb51900 ac640000 ae020004 16400094 ae020008
> > >>
> > >> Bisect points to 'MIPS: Add cacheinfo support'; see below for details.
> > >> Reverting this patch fixes te problem.
> > >>
> > >> Configuration is pretty much malta_defconfig with SMP disabled.
> > >> I can provide more details if needed.
> > >>
> > >> Thanks,
> > >> Guenter
> > >>
> > >> ---
> > >> # bad: [e3e6c5f3544c5d05c6b3b309a34f4f2c3537e993] Add linux-next specific files for 20170208
> > >> # good: [d5adbfcd5f7bcc6fa58a41c5c5ada0e5c826ce2c] Linux 4.10-rc7
> > >> git bisect start 'HEAD' 'v4.10-rc7'
> > >> # bad: [403e468309f9e2b2dbe264be1ad29b1486ed720e] Merge remote-tracking branch 'crypto/master'
> > >> git bisect bad 403e468309f9e2b2dbe264be1ad29b1486ed720e
> > >> # bad: [44448c3f07a3ae77164de4405fa97baca4f103f5] Merge remote-tracking branch 'hid/for-next'
> > >> git bisect bad 44448c3f07a3ae77164de4405fa97baca4f103f5
> > >> # good: [dd4318312c6fc5c00ae7619f875fb73538a2c1e6] Merge remote-tracking branch 'omap/for-next'
> > >> git bisect good dd4318312c6fc5c00ae7619f875fb73538a2c1e6
> > >> # bad: [2fe482530119a6d07acca625b29d527dc22435e6] Merge remote-tracking branch 'powerpc/next'
> > >> git bisect bad 2fe482530119a6d07acca625b29d527dc22435e6
> > >> # good: [8576190cecf3370ce07ed04178cb3ecbf17dc2d9] Merge remote-tracking branch 'clk/clk-next'
> > >> git bisect good 8576190cecf3370ce07ed04178cb3ecbf17dc2d9
> > >> # bad: [bf0505dfeac3f7df81b62d9d81987aaef6739ffd] MIPS: Fix special case in 64 bit IP checksumming.
> > >> git bisect bad bf0505dfeac3f7df81b62d9d81987aaef6739ffd
> > >> # good: [e89ef66d7682f031f026eee6bba03c8c2248d2a9] MIPS: init: Ensure reserved memory regions are not added to bootmem
> > >> git bisect good e89ef66d7682f031f026eee6bba03c8c2248d2a9
> > >> # bad: [a8b3b0c94ac282628f0668d1366239a3fa72dc9d] MIPS: Netlogic: Fix assembler warning from smpboot.S
> > >> git bisect bad a8b3b0c94ac282628f0668d1366239a3fa72dc9d
> > >> # bad: [07724712bf22aec5fe44e5d399f115755f436721] MIPS: ralink: Add missing symbol for highmem support.
> > >> git bisect bad 07724712bf22aec5fe44e5d399f115755f436721
> > >> # good: [856b0f591e951a234d6642cc466023df182eb51c] MIPS: kexec: add debug info about the new kexec'ed image
> > >> git bisect good 856b0f591e951a234d6642cc466023df182eb51c
> > >> # bad: [2517caf19dbfac3b39f2db5500c5fd03c4370e81] MIPS: ralink: Add missing I2C and I2S clocks.
> > >> git bisect bad 2517caf19dbfac3b39f2db5500c5fd03c4370e81
> > >> # bad: [ef462f3b64e9fb0c8e1cd5d60f5bd7f13ac2156d] MIPS: Add cacheinfo support
> > >> git bisect bad ef462f3b64e9fb0c8e1cd5d60f5bd7f13ac2156d
> > >> # good: [0014dea6b71ae3e0384c3358f632b4728c3d432e] MIPS: generic/kexec: add support for a DTB passed in a separate buffer
> > >> git bisect good 0014dea6b71ae3e0384c3358f632b4728c3d432e
> > >> # first bad commit: [ef462f3b64e9fb0c8e1cd5d60f5bd7f13ac2156d] MIPS: Add cacheinfo support
> > >>
> > >>
> > >
> >
> >
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: James Hogan <james.hogan@imgtec.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Justin Chen <justinpopo6@gmail.com>,
Justin Chen <justin.chen@broadcom.com>,
linux-mips@linux-mips.org,
Florian Fainelli <f.fainelli@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
Ralf Baechle <ralf@linux-mips.org>
Subject: Re: Crash in -next due to 'MIPS: Add cacheinfo support'
Date: Fri, 10 Feb 2017 10:39:52 +0000 [thread overview]
Message-ID: <20170210103952.GC24226@jhogan-linux.le.imgtec.org> (raw)
Message-ID: <20170210103952.VdjFLEr6KAuOlAUXD19dvfjs_va1_0LMwmeGDa9Ini8@z> (raw)
In-Reply-To: <20170210094011.GB24226@jhogan-linux.le.imgtec.org>
[-- Attachment #1: Type: text/plain, Size: 8864 bytes --]
On Fri, Feb 10, 2017 at 09:40:11AM +0000, James Hogan wrote:
> Hi Guenter,
>
> On Thu, Feb 09, 2017 at 08:50:04PM -0800, Guenter Roeck wrote:
> > On 02/09/2017 04:01 PM, Justin Chen wrote:
> > > Hello Guenter,
> > >
> > > I am unable to reproduce the problem. May you give me more details?
> > >
> > The scripts I am using are available at
> >
> > https://github.com/groeck/linux-build-test/tree/master/rootfs
> >
> > in the mips and mipsel subdirectories (both crash). Individual
> > build logs are always available at kerneltests.org/builders,
> > in the 'next' column.
>
> Did you find it 100% reproducible? I was trying to reproduce yesterday
> evening, and did hit it a few times, but then it stopped happening
> before I could try and figure out what was going wrong.
I switched to gcc 5.2 (buildroot toolchain) for building kernel, and now
it reproduces every time :)
Cheers
James
>
> I presume from your run-qemu-mipsel.sh script its a vanilla 2.7
> qemu-system-mipsel?
>
> Cheers
> James
>
> >
> > Note: If I build the image with my configuration, and run
> > your qemu command, I get a different crash:
> >
> > ...
> > ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1088 irq 15
> > CPU 0 Unable to handle kernel paging request at virtual address fffffffc, epc == 80341d68, ra == 803eae70
> > Oops[#1]:
> > CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.0-rc7-next-20170209 #2
> > task: 8704b8a0 task.stack: 8704c000
> > $ 0 : 00000000 0000006f fffffffc 00000000
> > $ 4 : 87044980 8069ee48 8069ee49 00000004
> > $ 8 : 00000000 8741c990 00000000 00000040
> > $12 : 00000000 00000001 00000000 fffffffe
> > $16 : 8070ae14 80742fb8 80738190 00000000
> > $20 : 806e0000 8071c2fc 80770000 00000008
> > $24 : 00000110 00000000
> > $28 : 8704c000 8704fe10 80754728 803eae70
> > Hi : 0000000f
> > Lo : 8f8f8f9f
> > epc : 80341d68 kset_find_obj+0xc/0xa4
> > ra : 803eae70 driver_find+0x1c/0x48
> > Status: 1000a403 KERNEL EXL IE
> > Cause : 00800008 (ExcCode 02)
> > BadVA : fffffffc
> > PrId : 00019300 (MIPS 24Kc)
> > Modules linked in:
> > Process swapper (pid: 1, threadinfo=8704c000, task=8704b8a0, tls=00000000)
> > Stack : 80710000 00000000 806e0000 8044ba18 8070ae14 803eaf10 00000000 00000000
> > 80770000 80742fb8 80770000 80770000 80742fb8 801005dc 8708b900 810017e0
> > 8704fe68 806f0000 806ee894 81041c41 80600600 80141fb8 00000000 80740000
> > 806e0000 80720000 00000000 00000006 806765e4 00000006 00000017 80670000
> > 80676cf0 80680000 80770000 80742fb8 00000006 80742f98 80770000 80742fb8
> > ...
> > Call Trace:
> > [<80341d68>] kset_find_obj+0xc/0xa4
> > [<803eae70>] driver_find+0x1c/0x48
> > [<803eaf10>] driver_register+0x74/0x128
> > [<801005dc>] do_one_initcall+0x48/0x16c
> > [<8071cd18>] kernel_init_freeable+0x170/0x22c
> > [<805e1d30>] kernel_init+0x14/0x108
> > [<80105e18>] ret_from_kernel_thread+0x14/0x1c
> > Code: 8c830000 10830012 2462fffc <8c430000> 1060000c 00a03021 90670000 90c10000 24630001
> >
> > ---[ end trace c22dffa22f0b1376 ]---
> > Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> >
> > ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> >
> > Guenter
> >
> > > I rebased my patch onto of 4.10-rc7 and compiled with malta defconfig
> > > with disabled SMP. Then booted with qemu. Doesn't seem to have an
> > > error with the way I have it set up.
> > >
> > > I am using the command:
> > > qemu-system-mipsel -kernel vmlinux -nographic -smp 0
> > >
> > > Thanks,
> > > Justin
> > >
> > > On Wed, Feb 8, 2017 at 3:45 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> > >> Hi Justin,
> > >>
> > >> The 32-bit qemu mips runtime tests for -next at kerneltests.org are crashing
> > >> for non-SMP builds as follows.
> > >>
> > >> cacheinfo: Failed to find cpu0 device node
> > >> cacheinfo: Unable to detect cache hierarchy for CPU 0
> > >> CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc ==
> > >> 8013c6a8, ra == 8013cb54
> > >> Oops[#1]:
> > >> CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.10.0-rc7-next-20170208 #1
> > >> Workqueue: events_unbound call_usermodehelper_exec_work
> > >> task: 8704a420 task.stack: 87068000
> > >> $ 0 : 00000000 80770000 873a8204 8700c214
> > >> $ 4 : 00000000 873a8200 00000000 ffff00fe
> > >> $ 8 : 8706bfe0 0000a400 fffffffc 8704a459
> > >> $12 : 00000000 00000000 00000000 00000720
> > >> $16 : 873a8200 87045880 00000000 8700c200
> > >> $20 : 87014000 87014005 8700c200 8700c200
> > >> $24 : 00000000 8014d1e8
> > >> $28 : 87068000 8706be70 87045880 8013cb54
> > >> Hi : 00077698
> > >> Lo : ab801af8
> > >> epc : 8013c6a8 process_one_work+0xd4/0x408
> > >> ra : 8013cb54 worker_thread+0x178/0x598
> > >> Status: 1000a402 KERNEL EXL
> > >> Cause : 0080000c (ExcCode 03)
> > >> BadVA : 00000004
> > >> PrId : 00019300 (MIPS 24Kc)
> > >> Modules linked in:
> > >> Process kworker/u2:0 (pid: 5, threadinfo=87068000, task=8704a420, tls=00000000)
> > >> Stack : 80700000 8700c214 00000088 80700000 8700c200 8700c200 8700c200 87045898
> > >> 80700000 8700c214 00000088 80700000 8700c200 8013cb54 8013c9dc 8704fe00
> > >> 87045600 87045700 80700000 80700000 80700000 80676560 87045600 87045700
> > >> 87045618 87045880 8013c9dc 8704fe00 80670000 80760000 806e0000 80142958
> > >> 00000000 00000000 00000000 00000000 80142850 80142850 87045700 8704b380
> > >> ...
> > >> Call Trace:
> > >> [<8013c6a8>] process_one_work+0xd4/0x408
> > >> [<8013cb54>] worker_thread+0x178/0x598
> > >> [<80142958>] kthread+0x108/0x138
> > >> [<80105e18>] ret_from_kernel_thread+0x14/0x1c
> > >> Code: 8e030008 8e040004 8e150000 <ac830004> 7eb51900 ac640000 ae020004 16400094 ae020008
> > >>
> > >> Bisect points to 'MIPS: Add cacheinfo support'; see below for details.
> > >> Reverting this patch fixes te problem.
> > >>
> > >> Configuration is pretty much malta_defconfig with SMP disabled.
> > >> I can provide more details if needed.
> > >>
> > >> Thanks,
> > >> Guenter
> > >>
> > >> ---
> > >> # bad: [e3e6c5f3544c5d05c6b3b309a34f4f2c3537e993] Add linux-next specific files for 20170208
> > >> # good: [d5adbfcd5f7bcc6fa58a41c5c5ada0e5c826ce2c] Linux 4.10-rc7
> > >> git bisect start 'HEAD' 'v4.10-rc7'
> > >> # bad: [403e468309f9e2b2dbe264be1ad29b1486ed720e] Merge remote-tracking branch 'crypto/master'
> > >> git bisect bad 403e468309f9e2b2dbe264be1ad29b1486ed720e
> > >> # bad: [44448c3f07a3ae77164de4405fa97baca4f103f5] Merge remote-tracking branch 'hid/for-next'
> > >> git bisect bad 44448c3f07a3ae77164de4405fa97baca4f103f5
> > >> # good: [dd4318312c6fc5c00ae7619f875fb73538a2c1e6] Merge remote-tracking branch 'omap/for-next'
> > >> git bisect good dd4318312c6fc5c00ae7619f875fb73538a2c1e6
> > >> # bad: [2fe482530119a6d07acca625b29d527dc22435e6] Merge remote-tracking branch 'powerpc/next'
> > >> git bisect bad 2fe482530119a6d07acca625b29d527dc22435e6
> > >> # good: [8576190cecf3370ce07ed04178cb3ecbf17dc2d9] Merge remote-tracking branch 'clk/clk-next'
> > >> git bisect good 8576190cecf3370ce07ed04178cb3ecbf17dc2d9
> > >> # bad: [bf0505dfeac3f7df81b62d9d81987aaef6739ffd] MIPS: Fix special case in 64 bit IP checksumming.
> > >> git bisect bad bf0505dfeac3f7df81b62d9d81987aaef6739ffd
> > >> # good: [e89ef66d7682f031f026eee6bba03c8c2248d2a9] MIPS: init: Ensure reserved memory regions are not added to bootmem
> > >> git bisect good e89ef66d7682f031f026eee6bba03c8c2248d2a9
> > >> # bad: [a8b3b0c94ac282628f0668d1366239a3fa72dc9d] MIPS: Netlogic: Fix assembler warning from smpboot.S
> > >> git bisect bad a8b3b0c94ac282628f0668d1366239a3fa72dc9d
> > >> # bad: [07724712bf22aec5fe44e5d399f115755f436721] MIPS: ralink: Add missing symbol for highmem support.
> > >> git bisect bad 07724712bf22aec5fe44e5d399f115755f436721
> > >> # good: [856b0f591e951a234d6642cc466023df182eb51c] MIPS: kexec: add debug info about the new kexec'ed image
> > >> git bisect good 856b0f591e951a234d6642cc466023df182eb51c
> > >> # bad: [2517caf19dbfac3b39f2db5500c5fd03c4370e81] MIPS: ralink: Add missing I2C and I2S clocks.
> > >> git bisect bad 2517caf19dbfac3b39f2db5500c5fd03c4370e81
> > >> # bad: [ef462f3b64e9fb0c8e1cd5d60f5bd7f13ac2156d] MIPS: Add cacheinfo support
> > >> git bisect bad ef462f3b64e9fb0c8e1cd5d60f5bd7f13ac2156d
> > >> # good: [0014dea6b71ae3e0384c3358f632b4728c3d432e] MIPS: generic/kexec: add support for a DTB passed in a separate buffer
> > >> git bisect good 0014dea6b71ae3e0384c3358f632b4728c3d432e
> > >> # first bad commit: [ef462f3b64e9fb0c8e1cd5d60f5bd7f13ac2156d] MIPS: Add cacheinfo support
> > >>
> > >>
> > >
> >
> >
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
next prev parent reply other threads:[~2017-02-10 10:40 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-08 23:45 Crash in -next due to 'MIPS: Add cacheinfo support' Guenter Roeck
2017-02-10 0:01 ` Justin Chen
2017-02-10 4:50 ` Guenter Roeck
2017-02-10 9:40 ` James Hogan
2017-02-10 9:40 ` James Hogan
2017-02-10 10:39 ` James Hogan [this message]
2017-02-10 10:39 ` James Hogan
2017-02-10 17:46 ` Guenter Roeck
2017-02-10 19:15 ` Florian Fainelli
2017-02-10 22:11 ` Guenter Roeck
2017-02-10 22:39 ` James Hogan
2017-02-10 22:39 ` James Hogan
2017-02-10 22:43 ` Florian Fainelli
2017-02-10 22:48 ` Guenter Roeck
2017-02-10 13:30 ` Guenter Roeck
2017-02-10 23:01 ` [PATCH] MIPS: Fix cacheinfo overflow James Hogan
2017-02-10 23:01 ` James Hogan
2017-02-10 23:10 ` Justin Chen
2017-02-10 23:44 ` James Hogan
2017-02-10 23:44 ` James Hogan
2017-02-10 23:48 ` Justin Chen
2017-02-11 1:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170210103952.GC24226@jhogan-linux.le.imgtec.org \
--to=james.hogan@imgtec.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=f.fainelli@gmail.com \
--cc=justin.chen@broadcom.com \
--cc=justinpopo6@gmail.com \
--cc=linux-mips@linux-mips.org \
--cc=linux@roeck-us.net \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox