From: David Daney <ddaney@caviumnetworks.com>
To: Rich Felker <dalias@libc.org>
Cc: David Daney <ddaney.cavm@gmail.com>, <libc-alpha@sourceware.org>,
<linux-kernel@vger.kernel.org>, <linux-mips@linux-mips.org>,
David Daney <david.daney@cavium.com>
Subject: Re: [PATCH resend] MIPS: Allow FPU emulator to use non-stack area.
Date: Mon, 6 Oct 2014 15:17:03 -0700 [thread overview]
Message-ID: <543314DF.20808@caviumnetworks.com> (raw)
In-Reply-To: <20141006215813.GB23797@brightrain.aerifal.cx>
On 10/06/2014 02:58 PM, Rich Felker wrote:
> On Mon, Oct 06, 2014 at 02:45:29PM -0700, David Daney wrote:
>> On 10/06/2014 02:31 PM, Rich Felker wrote:
>>> On Mon, Oct 06, 2014 at 02:18:19PM -0700, David Daney wrote:
>>>>> Userspace should play no part in this; requiring userspace to help
>>>>> make special accomodations for fpu emulation largely defeats the
>>>>> purpose of fpu emulation.
>>>>
>>>> That is certainly one way of looking at it. Really it is opinion,
>>>> rather than fact though.
>>>
>>> It's an opinion, yes, but it has substantial reason behind it.
>>>
>>>> GLibc is full of code (see ld.so) that in earlier incantations of
>>>> Unix/Linux was in kernel space, and was moved to userspace. Given
>>>> that there is a partitioning of code between kernel space and
>>>> userspace, I think it not totally unreasonable to consider doing
>>>> some of this in userspace.
>>>>
>>>> Even on systems with hardware FPU, the architecture specification
>>>> allows for/requires emulation of certain cases (denormals, etc.) So
>>>> it is already a requirement that userspace cooperate by always
>>>> having free space below $SP for use by the kernel. So the current
>>>> situation is that userspace is providing services for the kernel FPU
>>>> emulator.
>>>>
>>>> My suggestion is to change the nature of the way these services are
>>>> provided by the userspace program.
>>>
>>> But this isn't setup by the userspace program. It's setup by the
>>> kernel on program entry. Despite that, though, I think it's an
>>> unnecessary (and undocumented!) constraint; the fact that it requires
>>> the stack to be executable makes it even more harmful and
>>> inappropriate.
>>>
>>
>> The management of the stack is absolutely done by userspace code.
>> Any time you do pthread_create(), userspace code does mmap() to
>> allocate the stack area, it then sets permissions on the area, and
>> then it passes the address of the area to clone().
>
> This is hardly management.
>
>> Furthermore the
>> userspace code has to be very careful in its use of the $sp
>> register, so that it doesn't store data in places that will be
>> used/clobbered by the kernel.
>
> This is not "being careful". The stack pointer can never become
> invalid unless you do wacky things in asm or invoke UB.
>
>> All of this is under the control of the userspace program and done
>> with userspace code.
>
> For the most part it just happens by default. There is no particular
> intentionality needed, and certainly no hideous MIPS-specific hacks
> needed.
>
Yes, it happens by default. But it wasn't magic. It took careful work
by the ABI and toolchain designers to make it work.
>> I appreciate the fact that libc authors might prefer *not* to write
>> more code, but they could, especially if they wanted to add the
>> feature of non-executable stacks to their library implementation.
>
> So your position is that:
It is not really a position that I have. Rather a proposal for one
possible way to make non-executable stacks work on MIPS.
>
> 1. A non-exec-stack system can only run new code produced to do extra
> stuff in userspace.
Any non-executable stack solution for MIPS will require changes to the
toolchain/libc. So it is merely a question of what form the change
should take.
>
> 2. The startup code needs to do special work in userspace on MIPS to
> setup an executable area for fpu emulation.
Yes. Similar to how startup code has to do special work to set up the
TLS areas, and load shared libraries.
>
> 3. Every call to clone/CLONE_VM needs to be accompanied by a call to
> mmap and this new syscall to set the address, and every call to
> SYS_exit needs to be accompanies by a call to munmap for the
> corresponding mapping.
>
No, We don't have to mmap() on each thread creation. Many threads
(perhaps 512) could be handled by a single page, so the normal case
would be a single mmap() for the life of the program.
> This is a huge ill-designed mess.
>
Have you seen the alternatives?
Have you ever wondered why MIPS doesn't have non-executable stack support?
> Rich
>
WARNING: multiple messages have this Message-ID (diff)
From: David Daney <ddaney@caviumnetworks.com>
To: Rich Felker <dalias@libc.org>
Cc: David Daney <ddaney.cavm@gmail.com>,
libc-alpha@sourceware.org, linux-kernel@vger.kernel.org,
linux-mips@linux-mips.org, David Daney <david.daney@cavium.com>
Subject: Re: [PATCH resend] MIPS: Allow FPU emulator to use non-stack area.
Date: Mon, 6 Oct 2014 15:17:03 -0700 [thread overview]
Message-ID: <543314DF.20808@caviumnetworks.com> (raw)
Message-ID: <20141006221703.nM32y5gKIZZb-YKdH0_wsEeld6u-XaPgAvEx1npTENA@z> (raw)
In-Reply-To: <20141006215813.GB23797@brightrain.aerifal.cx>
On 10/06/2014 02:58 PM, Rich Felker wrote:
> On Mon, Oct 06, 2014 at 02:45:29PM -0700, David Daney wrote:
>> On 10/06/2014 02:31 PM, Rich Felker wrote:
>>> On Mon, Oct 06, 2014 at 02:18:19PM -0700, David Daney wrote:
>>>>> Userspace should play no part in this; requiring userspace to help
>>>>> make special accomodations for fpu emulation largely defeats the
>>>>> purpose of fpu emulation.
>>>>
>>>> That is certainly one way of looking at it. Really it is opinion,
>>>> rather than fact though.
>>>
>>> It's an opinion, yes, but it has substantial reason behind it.
>>>
>>>> GLibc is full of code (see ld.so) that in earlier incantations of
>>>> Unix/Linux was in kernel space, and was moved to userspace. Given
>>>> that there is a partitioning of code between kernel space and
>>>> userspace, I think it not totally unreasonable to consider doing
>>>> some of this in userspace.
>>>>
>>>> Even on systems with hardware FPU, the architecture specification
>>>> allows for/requires emulation of certain cases (denormals, etc.) So
>>>> it is already a requirement that userspace cooperate by always
>>>> having free space below $SP for use by the kernel. So the current
>>>> situation is that userspace is providing services for the kernel FPU
>>>> emulator.
>>>>
>>>> My suggestion is to change the nature of the way these services are
>>>> provided by the userspace program.
>>>
>>> But this isn't setup by the userspace program. It's setup by the
>>> kernel on program entry. Despite that, though, I think it's an
>>> unnecessary (and undocumented!) constraint; the fact that it requires
>>> the stack to be executable makes it even more harmful and
>>> inappropriate.
>>>
>>
>> The management of the stack is absolutely done by userspace code.
>> Any time you do pthread_create(), userspace code does mmap() to
>> allocate the stack area, it then sets permissions on the area, and
>> then it passes the address of the area to clone().
>
> This is hardly management.
>
>> Furthermore the
>> userspace code has to be very careful in its use of the $sp
>> register, so that it doesn't store data in places that will be
>> used/clobbered by the kernel.
>
> This is not "being careful". The stack pointer can never become
> invalid unless you do wacky things in asm or invoke UB.
>
>> All of this is under the control of the userspace program and done
>> with userspace code.
>
> For the most part it just happens by default. There is no particular
> intentionality needed, and certainly no hideous MIPS-specific hacks
> needed.
>
Yes, it happens by default. But it wasn't magic. It took careful work
by the ABI and toolchain designers to make it work.
>> I appreciate the fact that libc authors might prefer *not* to write
>> more code, but they could, especially if they wanted to add the
>> feature of non-executable stacks to their library implementation.
>
> So your position is that:
It is not really a position that I have. Rather a proposal for one
possible way to make non-executable stacks work on MIPS.
>
> 1. A non-exec-stack system can only run new code produced to do extra
> stuff in userspace.
Any non-executable stack solution for MIPS will require changes to the
toolchain/libc. So it is merely a question of what form the change
should take.
>
> 2. The startup code needs to do special work in userspace on MIPS to
> setup an executable area for fpu emulation.
Yes. Similar to how startup code has to do special work to set up the
TLS areas, and load shared libraries.
>
> 3. Every call to clone/CLONE_VM needs to be accompanied by a call to
> mmap and this new syscall to set the address, and every call to
> SYS_exit needs to be accompanies by a call to munmap for the
> corresponding mapping.
>
No, We don't have to mmap() on each thread creation. Many threads
(perhaps 512) could be handled by a single page, so the normal case
would be a single mmap() for the life of the program.
> This is a huge ill-designed mess.
>
Have you seen the alternatives?
Have you ever wondered why MIPS doesn't have non-executable stack support?
> Rich
>
next prev parent reply other threads:[~2014-10-06 22:17 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-06 20:23 [PATCH resend] MIPS: Allow FPU emulator to use non-stack area David Daney
2014-10-06 20:54 ` Rich Felker
2014-10-06 21:18 ` David Daney
2014-10-06 21:18 ` David Daney
2014-10-06 21:31 ` Rich Felker
2014-10-06 21:45 ` David Daney
2014-10-06 21:45 ` David Daney
2014-10-06 21:58 ` Rich Felker
2014-10-06 22:17 ` David Daney [this message]
2014-10-06 22:17 ` David Daney
2014-10-06 23:08 ` Rich Felker
2014-10-06 23:38 ` Andy Lutomirski
2014-10-06 23:48 ` David Daney
2014-10-06 23:48 ` David Daney
2014-10-06 23:54 ` Andy Lutomirski
2014-10-07 0:05 ` Rich Felker
2014-10-07 0:11 ` Andrew Pinski
2014-10-07 0:21 ` Rich Felker
2014-10-07 0:28 ` Andrew Pinski
2014-10-07 0:29 ` Andy Lutomirski
2014-10-07 0:32 ` David Daney
2014-10-07 0:33 ` David Daney
2014-10-07 0:33 ` David Daney
2014-10-07 0:48 ` Andy Lutomirski
2014-10-07 0:49 ` Rich Felker
2014-10-07 4:50 ` David Daney
2014-10-07 9:13 ` Matthew Fortune
2014-10-07 9:13 ` Matthew Fortune
2014-10-07 10:52 ` James Hogan
2014-10-07 11:19 ` Rich Felker
2014-10-07 16:04 ` David Daney
2014-10-07 18:32 ` Leonid Yegoshin
2014-10-07 18:43 ` David Daney
2014-10-07 19:13 ` Leonid Yegoshin
2014-10-07 18:44 ` Andy Lutomirski
2014-10-07 18:50 ` David Daney
2014-10-07 19:09 ` Rich Felker
2014-10-07 19:16 ` Leonid Yegoshin
2014-10-07 19:21 ` Rich Felker
2014-10-07 19:27 ` Leonid Yegoshin
2014-10-07 19:28 ` Andy Lutomirski
2014-10-07 20:03 ` David Daney
2014-10-08 0:22 ` Andy Lutomirski
2014-10-07 19:40 ` Matthew Fortune
2014-10-07 11:11 ` Rich Felker
2014-10-07 16:08 ` David Daney
2014-10-07 16:08 ` David Daney
2014-10-07 18:16 ` Andy Lutomirski
2014-10-07 23:20 ` Ralf Baechle
2014-10-07 23:59 ` David Daney
2014-10-07 23:59 ` David Daney
2014-10-08 0:18 ` Chuck Ebbert
2014-10-08 0:18 ` Chuck Ebbert
2014-10-08 2:37 ` Rich Felker
2014-10-08 10:31 ` Paul Burton
2014-10-08 10:31 ` Paul Burton
2014-10-07 1:02 ` Kevin D. Kissell
2014-10-07 1:38 ` Rich Felker
2014-10-07 4:32 ` David Daney
2014-10-07 11:53 ` James Hogan
2014-10-07 11:53 ` James Hogan
2014-10-07 12:22 ` James Hogan
2014-10-07 12:22 ` James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=543314DF.20808@caviumnetworks.com \
--to=ddaney@caviumnetworks.com \
--cc=dalias@libc.org \
--cc=david.daney@cavium.com \
--cc=ddaney.cavm@gmail.com \
--cc=libc-alpha@sourceware.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox