From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
Josh Wu <rainyfeeling@outlook.com>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Boris Brezillon <boris.brezillon@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Kamal Dasu <kdasu.kdev@gmail.com>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>,
Xiaolei Li <xiaolei.li@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Marc Gonzalez <marc.w.gonzalez@free.fr>,
Mans Rullgard <mans@mansr.com>, Stefan Agner <stefan@agner.ch>
Cc: linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-mediatek@lists.infradead.org
Subject: [PATCH v2 12/32] mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
Date: Wed, 4 Jul 2018 00:00:09 +0200 [thread overview]
Message-ID: <20180703220029.19565-13-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180703220029.19565-1-miquel.raynal@bootlin.com>
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/lpc32xx_mlc.c | 105 +++++++++++++++++++------------------
1 file changed, 55 insertions(+), 50 deletions(-)
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 052d123a8304..d650ed609ba7 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -184,6 +184,7 @@ static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = {
};
struct lpc32xx_nand_host {
+ struct platform_device *pdev;
struct nand_chip nand_chip;
struct lpc32xx_mlc_platform_data *pdata;
struct clk *clk;
@@ -653,6 +654,53 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
return ncfg;
}
+static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
+ struct device *dev = &host->pdev->dev;
+
+ host->dma_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL);
+ if (!host->dma_buf)
+ return -ENOMEM;
+
+ host->dummy_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL);
+ if (!host->dummy_buf)
+ return -ENOMEM;
+
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 512;
+ mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
+ host->mlcsubpages = mtd->writesize / 512;
+
+ /* initially clear interrupt status */
+ readb(MLC_IRQ_SR(host->io_base));
+
+ init_completion(&host->comp_nand);
+ init_completion(&host->comp_controller);
+
+ host->irq = platform_get_irq(host->pdev, 0);
+ if (host->irq < 0) {
+ dev_err(dev, "failed to get platform irq\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+ IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
+ dev_err(dev, "Error requesting NAND IRQ\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void lpc32xx_nand_detach_chip(struct nand_chip *chip)
+{
+ struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
+
+ free_irq(host->irq, host);
+}
+
/*
* Probe for NAND controller
*/
@@ -669,6 +717,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
if (!host)
return -ENOMEM;
+ host->pdev = pdev;
+
rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->io_base = devm_ioremap_resource(&pdev->dev, rc);
if (IS_ERR(host->io_base))
@@ -749,58 +799,15 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
}
/*
- * Scan to find existance of the device and
- * Get the type of NAND device SMALL block or LARGE block
+ * Scan to find existence of the device and get the type of NAND device:
+ * SMALL block or LARGE block.
*/
- res = nand_scan_ident(mtd, 1, NULL);
+ nand_chip->hwcontrol.attach_chip = lpc32xx_nand_attach_chip;
+ nand_chip->hwcontrol.detach_chip = lpc32xx_nand_detach_chip;
+ res = nand_scan(mtd, 1);
if (res)
goto release_dma_chan;
- host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
- if (!host->dma_buf) {
- res = -ENOMEM;
- goto release_dma_chan;
- }
-
- host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
- if (!host->dummy_buf) {
- res = -ENOMEM;
- goto release_dma_chan;
- }
-
- nand_chip->ecc.mode = NAND_ECC_HW;
- nand_chip->ecc.size = 512;
- mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
- host->mlcsubpages = mtd->writesize / 512;
-
- /* initially clear interrupt status */
- readb(MLC_IRQ_SR(host->io_base));
-
- init_completion(&host->comp_nand);
- init_completion(&host->comp_controller);
-
- host->irq = platform_get_irq(pdev, 0);
- if (host->irq < 0) {
- dev_err(&pdev->dev, "failed to get platform irq\n");
- res = -EINVAL;
- goto release_dma_chan;
- }
-
- if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
- IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
- dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
- res = -ENXIO;
- goto release_dma_chan;
- }
-
- /*
- * Fills out all the uninitialized function pointers with the defaults
- * And scans for a bad block table if appropriate.
- */
- res = nand_scan_tail(mtd);
- if (res)
- goto free_irq;
-
mtd->name = DRV_NAME;
res = mtd_device_register(mtd, host->ncfg->parts,
@@ -812,8 +819,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
cleanup_nand:
nand_cleanup(nand_chip);
-free_irq:
- free_irq(host->irq, host);
release_dma_chan:
if (use_dma)
dma_release_channel(host->dma_chan);
--
2.14.1
next prev parent reply other threads:[~2018-07-03 22:00 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 21:59 [PATCH v2 00/32] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-03 21:59 ` [PATCH v2 01/32] mtd: rawnand: add hooks that may be called during nand_scan() Miquel Raynal
2018-07-04 7:09 ` Boris Brezillon
2018-07-03 21:59 ` [PATCH v2 02/32] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-04 7:14 ` Boris Brezillon
2018-07-03 22:00 ` [PATCH v2 03/32] mtd: rawnand: cafe: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 04/32] mtd: rawnand: davinci: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 05/32] mtd: rawnand: denali: convert " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 06/32] mtd: rawnand: fsl_elbc: convert driver " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 07/32] mtd: rawnand: fsl_ifc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 08/32] mtd: rawnand: fsmc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 09/32] mtd: rawnand: gpmi: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 10/32] mtd: rawnand: hisi504: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 11/32] mtd: rawnand: jz4780: " Miquel Raynal
2018-07-03 22:00 ` Miquel Raynal [this message]
2018-07-03 22:00 ` [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 14/32] mtd: rawnand: marvell: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 15/32] mtd: rawnand: mtk: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 16/32] mtd: rawnand: mxc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 17/32] mtd: rawnand: nandsim: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 18/32] mtd: rawnand: omap2: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 19/32] mtd: rawnand: s3c2410: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 20/32] mtd: rawnand: sh_flctl: move all NAND chip related setup in one function Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 21/32] mtd: rawnand: sh_flctl: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 22/32] mtd: rawnand: sunxi: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 23/32] mtd: rawnand: tango: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 24/32] mtd: rawnand: txx9ndfmc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 25/32] mtd: rawnand: vf610: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 26/32] mtd: rawnand: atmel: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 27/32] mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 28/32] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 29/32] mtd: rawnand: qcom: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 30/32] mtd: rawnand: jz4740: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 31/32] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 32/32] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180703220029.19565-13-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=han.xu@nxp.com \
--cc=harveyhuntnexus@gmail.com \
--cc=kdasu.kdev@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mans@mansr.com \
--cc=marc.w.gonzalez@free.fr \
--cc=marek.vasut@gmail.com \
--cc=matthias.bgg@gmail.com \
--cc=maxime.ripard@bootlin.com \
--cc=nicolas.ferre@microchip.com \
--cc=rainyfeeling@outlook.com \
--cc=richard@nod.at \
--cc=slemieux.tyco@gmail.com \
--cc=stefan@agner.ch \
--cc=vz@mleia.com \
--cc=wens@csie.org \
--cc=wenyou.yang@microchip.com \
--cc=xiaolei.li@mediatek.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox