From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
Josh Wu <rainyfeeling@outlook.com>,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Boris Brezillon <boris.brezillon@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Kamal Dasu <kdasu.kdev@gmail.com>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
Vladimir Zapolskiy <vz@mleia.com>,
Sylvain Lemieux <slemieux.tyco@gmail.com>,
Xiaolei Li <xiaolei.li@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Marc Gonzalez <marc.w.gonzalez@free.fr>,
Mans Rullgard <mans@mansr.com>, Stefan Agner <stefan@agner.ch>
Cc: linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
linux-mediatek@lists.infradead.org
Subject: [PATCH v2 03/32] mtd: rawnand: cafe: convert driver to nand_scan()
Date: Wed, 4 Jul 2018 00:00:00 +0200 [thread overview]
Message-ID: <20180703220029.19565-4-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180703220029.19565-1-miquel.raynal@bootlin.com>
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/cafe_nand.c | 131 ++++++++++++++++++++++-----------------
1 file changed, 75 insertions(+), 56 deletions(-)
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index d721f489b38b..035061606e39 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -71,7 +71,9 @@ struct cafe_priv {
unsigned char *dmabuf;
};
-static int usedma = 1;
+#define CAFE_DEFAULT_DMA 1
+
+static int usedma = CAFE_DEFAULT_DMA;
module_param(usedma, int, 0644);
static int skipbbt = 0;
@@ -598,6 +600,74 @@ static int cafe_mul(int x)
return gf4096_mul(x, 0xe01);
}
+static int cafe_nand_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct cafe_priv *cafe = nand_get_controller_data(chip);
+ int err = 0;
+
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112,
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf)
+ return -ENOMEM;
+
+ /* Set up DMA address */
+ cafe_writel(cafe, lower_32_bits(cafe->dmaaddr), NAND_DMA_ADDR0);
+ cafe_writel(cafe, upper_32_bits(cafe->dmaaddr), NAND_DMA_ADDR1);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
+ cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
+
+ /* Restore the DMA flag */
+ usedma = CAFE_DEFAULT_DMA;
+
+ cafe->ctl2 = BIT(27); /* Reed-Solomon ECC */
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= BIT(29); /* 2KiB page size */
+
+ /* Set up ECC according to the type of chip we found */
+ mtd_set_ooblayout(mtd, &cafe_ooblayout_ops);
+ if (mtd->writesize == 2048) {
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
+ } else if (mtd->writesize == 512) {
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
+ } else {
+ dev_warn(&cafe->pdev->dev,
+ "Unexpected NAND flash writesize %d. Aborting\n",
+ mtd->writesize);
+ err = -ENOTSUPP;
+ goto out_free_dma;
+ }
+
+ cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.size = mtd->writesize;
+ cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.strength = 4;
+ cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
+ cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
+ cafe->nand.ecc.correct = (void *)cafe_nand_bug;
+ cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
+ cafe->nand.ecc.write_oob = cafe_nand_write_oob;
+ cafe->nand.ecc.read_page = cafe_nand_read_page;
+ cafe->nand.ecc.read_oob = cafe_nand_read_oob;
+
+ return 0;
+
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+
+ return err;
+}
+
+static void cafe_nand_detach_chip(struct nand_chip *chip)
+{
+ struct cafe_priv *cafe = nand_get_controller_data(chip);
+
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+}
+
static int cafe_nand_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -713,65 +783,16 @@ static int cafe_nand_probe(struct pci_dev *pdev,
cafe_readl(cafe, GLOBAL_CTRL),
cafe_readl(cafe, GLOBAL_IRQ_MASK));
- /* Do not use the DMA for the nand_scan_ident() */
- old_dma = usedma;
+ /* Do not use the DMA during the NAND identification */
usedma = 0;
/* Scan to find existence of the device */
- err = nand_scan_ident(mtd, 2, NULL);
+ cafe->nand.hwcontrol.attach_chip = cafe_nand_attach_chip;
+ cafe->nand.hwcontrol.detach_chip = cafe_nand_detach_chip;
+ err = nand_scan(mtd, 2);
if (err)
goto out_irq;
- cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112,
- &cafe->dmaaddr, GFP_KERNEL);
- if (!cafe->dmabuf) {
- err = -ENOMEM;
- goto out_irq;
- }
-
- /* Set up DMA address */
- cafe_writel(cafe, lower_32_bits(cafe->dmaaddr), NAND_DMA_ADDR0);
- cafe_writel(cafe, upper_32_bits(cafe->dmaaddr), NAND_DMA_ADDR1);
-
- cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
- cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
-
- /* Restore the DMA flag */
- usedma = old_dma;
-
- cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
- if (mtd->writesize == 2048)
- cafe->ctl2 |= 1<<29; /* 2KiB page size */
-
- /* Set up ECC according to the type of chip we found */
- mtd_set_ooblayout(mtd, &cafe_ooblayout_ops);
- if (mtd->writesize == 2048) {
- cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
- cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
- } else if (mtd->writesize == 512) {
- cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
- cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
- } else {
- pr_warn("Unexpected NAND flash writesize %d. Aborting\n",
- mtd->writesize);
- goto out_free_dma;
- }
- cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
- cafe->nand.ecc.size = mtd->writesize;
- cafe->nand.ecc.bytes = 14;
- cafe->nand.ecc.strength = 4;
- cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
- cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
- cafe->nand.ecc.correct = (void *)cafe_nand_bug;
- cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
- cafe->nand.ecc.write_oob = cafe_nand_write_oob;
- cafe->nand.ecc.read_page = cafe_nand_read_page;
- cafe->nand.ecc.read_oob = cafe_nand_read_oob;
-
- err = nand_scan_tail(mtd);
- if (err)
- goto out_free_dma;
-
pci_set_drvdata(pdev, mtd);
mtd->name = "cafe_nand";
@@ -783,8 +804,6 @@ static int cafe_nand_probe(struct pci_dev *pdev,
out_cleanup_nand:
nand_cleanup(&cafe->nand);
- out_free_dma:
- dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
out_irq:
/* Disable NAND IRQ in global IRQ mask register */
cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
--
2.14.1
next prev parent reply other threads:[~2018-07-03 22:00 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-03 21:59 [PATCH v2 00/32] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-03 21:59 ` [PATCH v2 01/32] mtd: rawnand: add hooks that may be called during nand_scan() Miquel Raynal
2018-07-04 7:09 ` Boris Brezillon
2018-07-03 21:59 ` [PATCH v2 02/32] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-04 7:14 ` Boris Brezillon
2018-07-03 22:00 ` Miquel Raynal [this message]
2018-07-03 22:00 ` [PATCH v2 04/32] mtd: rawnand: davinci: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 05/32] mtd: rawnand: denali: convert " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 06/32] mtd: rawnand: fsl_elbc: convert driver " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 07/32] mtd: rawnand: fsl_ifc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 08/32] mtd: rawnand: fsmc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 09/32] mtd: rawnand: gpmi: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 10/32] mtd: rawnand: hisi504: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 11/32] mtd: rawnand: jz4780: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 12/32] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 14/32] mtd: rawnand: marvell: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 15/32] mtd: rawnand: mtk: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 16/32] mtd: rawnand: mxc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 17/32] mtd: rawnand: nandsim: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 18/32] mtd: rawnand: omap2: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 19/32] mtd: rawnand: s3c2410: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 20/32] mtd: rawnand: sh_flctl: move all NAND chip related setup in one function Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 21/32] mtd: rawnand: sh_flctl: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 22/32] mtd: rawnand: sunxi: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 23/32] mtd: rawnand: tango: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 24/32] mtd: rawnand: txx9ndfmc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 25/32] mtd: rawnand: vf610: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 26/32] mtd: rawnand: atmel: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 27/32] mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 28/32] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 29/32] mtd: rawnand: qcom: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 30/32] mtd: rawnand: jz4740: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 31/32] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 32/32] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180703220029.19565-4-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=han.xu@nxp.com \
--cc=harveyhuntnexus@gmail.com \
--cc=kdasu.kdev@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=mans@mansr.com \
--cc=marc.w.gonzalez@free.fr \
--cc=marek.vasut@gmail.com \
--cc=matthias.bgg@gmail.com \
--cc=maxime.ripard@bootlin.com \
--cc=nicolas.ferre@microchip.com \
--cc=rainyfeeling@outlook.com \
--cc=richard@nod.at \
--cc=slemieux.tyco@gmail.com \
--cc=stefan@agner.ch \
--cc=vz@mleia.com \
--cc=wens@csie.org \
--cc=wenyou.yang@microchip.com \
--cc=xiaolei.li@mediatek.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox