[PATCH v2 17/32] mtd: rawnand: nandsim: convert driver to nand_scan()

[Miquel Raynal <miquel.raynal@bootlin.com>]

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/nandsim.c | 78 ++++++++++++++++++++++--------------------
 1 file changed, 41 insertions(+), 37 deletions(-)

diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index f8edacde49ab..fa9d1c05fc45 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2192,6 +2192,44 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 	return;
 }
 
+static int ns_attach_chip(struct nand_chip *chip)
+{
+	unsigned int eccsteps, eccbytes;
+
+	if (!bch)
+		return 0;
+
+	if (!mtd_nand_has_bch()) {
+		NS_ERR("BCH ECC support is disabled\n");
+		return -EINVAL;
+	}
+
+	/* Use 512-byte ecc blocks */
+	eccsteps = nsmtd->writesize / 512;
+	eccbytes = ((bch * 13) + 7) / 8;
+
+	/* Do not bother supporting small page devices */
+	if (nsmtd->oobsize < 64 || !eccsteps) {
+		NS_ERR("BCH not available on small page devices\n");
+		return -EINVAL;
+	}
+
+	if (((eccbytes * eccsteps) + 2) > nsmtd->oobsize) {
+		NS_ERR("Invalid BCH value %u\n", bch);
+		return -EINVAL;
+	}
+
+	chip->ecc.mode = NAND_ECC_SOFT;
+	chip->ecc.algo = NAND_ECC_BCH;
+	chip->ecc.size = 512;
+	chip->ecc.strength = bch;
+	chip->ecc.bytes = eccbytes;
+
+	NS_INFO("Using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
+
+	return 0;
+}
+
 /*
  * Module initialization function
  */
@@ -2276,44 +2314,10 @@ static int __init ns_init_module(void)
 	if ((retval = parse_gravepages()) != 0)
 		goto error;
 
-	retval = nand_scan_ident(nsmtd, 1, NULL);
+	chip->hwcontrol.attach_chip = ns_attach_chip;
+	retval = nand_scan(nsmtd, 1);
 	if (retval) {
-		NS_ERR("cannot scan NAND Simulator device\n");
-		goto error;
-	}
-
-	if (bch) {
-		unsigned int eccsteps, eccbytes;
-		if (!mtd_nand_has_bch()) {
-			NS_ERR("BCH ECC support is disabled\n");
-			retval = -EINVAL;
-			goto error;
-		}
-		/* use 512-byte ecc blocks */
-		eccsteps = nsmtd->writesize/512;
-		eccbytes = (bch*13+7)/8;
-		/* do not bother supporting small page devices */
-		if ((nsmtd->oobsize < 64) || !eccsteps) {
-			NS_ERR("bch not available on small page devices\n");
-			retval = -EINVAL;
-			goto error;
-		}
-		if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
-			NS_ERR("invalid bch value %u\n", bch);
-			retval = -EINVAL;
-			goto error;
-		}
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_BCH;
-		chip->ecc.size = 512;
-		chip->ecc.strength = bch;
-		chip->ecc.bytes = eccbytes;
-		NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
-	}
-
-	retval = nand_scan_tail(nsmtd);
-	if (retval) {
-		NS_ERR("can't register NAND Simulator\n");
+		NS_ERR("Could not scan NAND Simulator device\n");
 		goto error;
 	}
 
-- 
2.14.1