public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Xiaolei Li <xiaolei.li@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Marc Gonzalez <marc.w.gonzalez@free.fr>,
	Mans Rullgard <mans@mansr.com>, Stefan Agner <stefan@agner.ch>
Cc: linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v2 20/32] mtd: rawnand: sh_flctl: move all NAND chip related setup in one function
Date: Wed,  4 Jul 2018 00:00:17 +0200	[thread overview]
Message-ID: <20180703220029.19565-21-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180703220029.19565-1-miquel.raynal@bootlin.com>

Prepare the conversion of the sh_flctl driver to nand_scan() by moving
all the configuration that must be made after nand_scan_ident() in one
single function. Create a pdata entry in the controller structure for
that.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/sh_flctl.c | 38 +++++++++++++++++++-------------------
 include/linux/mtd/sh_flctl.h    |  1 +
 2 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index c7abceffcc40..d37d1d3ccbf9 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1007,6 +1007,16 @@ static int flctl_chip_init_tail(struct mtd_info *mtd)
 	struct sh_flctl *flctl = mtd_to_flctl(mtd);
 	struct nand_chip *chip = &flctl->chip;
 
+	if (chip->options & NAND_BUSWIDTH_16) {
+		/*
+		 * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
+		 * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign
+		 * flctl->flcmncr_base to pdata->flcmncr_val.
+		 */
+		flctl->pdata->flcmncr_val |= SEL_16BIT;
+		flctl->flcmncr_base = flctl->pdata->flcmncr_val;
+	}
+
 	if (mtd->writesize == 512) {
 		flctl->page_size = 0;
 		if (chip->chipsize > (32 << 20)) {
@@ -1122,7 +1132,6 @@ static int flctl_probe(struct platform_device *pdev)
 	struct sh_flctl *flctl;
 	struct mtd_info *flctl_mtd;
 	struct nand_chip *nand;
-	struct sh_flctl_platform_data *pdata;
 	int ret;
 	int irq;
 
@@ -1150,11 +1159,11 @@ static int flctl_probe(struct platform_device *pdev)
 	}
 
 	if (pdev->dev.of_node)
-		pdata = flctl_parse_dt(&pdev->dev);
+		flctl->pdata = flctl_parse_dt(&pdev->dev);
 	else
-		pdata = dev_get_platdata(&pdev->dev);
+		flctl->pdata = dev_get_platdata(&pdev->dev);
 
-	if (!pdata) {
+	if (!flctl->pdata) {
 		dev_err(&pdev->dev, "no setup data defined\n");
 		return -EINVAL;
 	}
@@ -1165,9 +1174,9 @@ static int flctl_probe(struct platform_device *pdev)
 	nand_set_flash_node(nand, pdev->dev.of_node);
 	flctl_mtd->dev.parent = &pdev->dev;
 	flctl->pdev = pdev;
-	flctl->hwecc = pdata->has_hwecc;
-	flctl->holden = pdata->use_holden;
-	flctl->flcmncr_base = pdata->flcmncr_val;
+	flctl->hwecc = flctl->pdata->has_hwecc;
+	flctl->holden = flctl->pdata->use_holden;
+	flctl->flcmncr_base = flctl->pdata->flcmncr_val;
 	flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
 
 	/* Set address of hardware control function */
@@ -1183,7 +1192,7 @@ static int flctl_probe(struct platform_device *pdev)
 	nand->set_features = nand_get_set_features_notsupp;
 	nand->get_features = nand_get_set_features_notsupp;
 
-	if (pdata->flcmncr_val & SEL_16BIT)
+	if (flctl->pdata->flcmncr_val & SEL_16BIT)
 		nand->options |= NAND_BUSWIDTH_16;
 
 	pm_runtime_enable(&pdev->dev);
@@ -1195,16 +1204,6 @@ static int flctl_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_chip;
 
-	if (nand->options & NAND_BUSWIDTH_16) {
-		/*
-		 * NAND_BUSWIDTH_16 may have been set by nand_scan_ident().
-		 * Add the SEL_16BIT flag in pdata->flcmncr_val and re-assign
-		 * flctl->flcmncr_base to pdata->flcmncr_val.
-		 */
-		pdata->flcmncr_val |= SEL_16BIT;
-		flctl->flcmncr_base = pdata->flcmncr_val;
-	}
-
 	ret = flctl_chip_init_tail(flctl_mtd);
 	if (ret)
 		goto err_chip;
@@ -1213,7 +1212,8 @@ static int flctl_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_chip;
 
-	ret = mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
+	ret = mtd_device_register(flctl_mtd, flctl->pdata->parts,
+				  flctl->pdata->nr_parts);
 	if (ret)
 		goto cleanup_nand;
 
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index c759d403cbc0..c9f486c6c019 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -148,6 +148,7 @@ struct sh_flctl {
 	struct dev_pm_qos_request pm_qos;
 	void __iomem		*reg;
 	resource_size_t		fifo;
+	struct sh_flctl_platform_data *pdata;
 
 	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
 	int	read_bytes;
-- 
2.14.1

  parent reply	other threads:[~2018-07-03 22:00 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-03 21:59 [PATCH v2 00/32] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-03 21:59 ` [PATCH v2 01/32] mtd: rawnand: add hooks that may be called during nand_scan() Miquel Raynal
2018-07-04  7:09   ` Boris Brezillon
2018-07-03 21:59 ` [PATCH v2 02/32] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-04  7:14   ` Boris Brezillon
2018-07-03 22:00 ` [PATCH v2 03/32] mtd: rawnand: cafe: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 04/32] mtd: rawnand: davinci: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 05/32] mtd: rawnand: denali: convert " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 06/32] mtd: rawnand: fsl_elbc: convert driver " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 07/32] mtd: rawnand: fsl_ifc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 08/32] mtd: rawnand: fsmc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 09/32] mtd: rawnand: gpmi: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 10/32] mtd: rawnand: hisi504: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 11/32] mtd: rawnand: jz4780: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 12/32] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 13/32] mtd: rawnand: lpc32xx_slc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 14/32] mtd: rawnand: marvell: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 15/32] mtd: rawnand: mtk: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 16/32] mtd: rawnand: mxc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 17/32] mtd: rawnand: nandsim: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 18/32] mtd: rawnand: omap2: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 19/32] mtd: rawnand: s3c2410: " Miquel Raynal
2018-07-03 22:00 ` Miquel Raynal [this message]
2018-07-03 22:00 ` [PATCH v2 21/32] mtd: rawnand: sh_flctl: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 22/32] mtd: rawnand: sunxi: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 23/32] mtd: rawnand: tango: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 24/32] mtd: rawnand: txx9ndfmc: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 25/32] mtd: rawnand: vf610: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 26/32] mtd: rawnand: atmel: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 27/32] mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 28/32] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 29/32] mtd: rawnand: qcom: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 30/32] mtd: rawnand: jz4740: " Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 31/32] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-03 22:00 ` [PATCH v2 32/32] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180703220029.19565-21-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=han.xu@nxp.com \
    --cc=harveyhuntnexus@gmail.com \
    --cc=kdasu.kdev@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mans@mansr.com \
    --cc=marc.w.gonzalez@free.fr \
    --cc=marek.vasut@gmail.com \
    --cc=matthias.bgg@gmail.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=rainyfeeling@outlook.com \
    --cc=richard@nod.at \
    --cc=slemieux.tyco@gmail.com \
    --cc=stefan@agner.ch \
    --cc=vz@mleia.com \
    --cc=wens@csie.org \
    --cc=wenyou.yang@microchip.com \
    --cc=xiaolei.li@mediatek.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox