How to recover flash

How to recover flash

[Luís Cargnini]

Please I destroyed the flash of my OMAP OSK5912 (dev kit) how to recover the
flash ??
after download the u-boot latest version i must do saveenv before reboot ?

-- 
Thanks && Regards
Msc. Bsc. Luís Vitório Cargnini
IEEE Member
Mastering Degree student @ PUC-RS Electrical Engineer Faculty

Re: How to recover flash

[Matthew Percival]

G'Day,

> Please I destroyed the flash of my OMAP OSK5912 (dev kit) how to recover the
> flash ??
> after download the u-boot latest version i must do saveenv before reboot ?

	The fastest way to recover u-boot on an OSK is to use one of the three
flash recovery utilities:
	Flash Recovery Utility works on Windows, is free, and recovers revision
C boards.
	OMAP Flash Loader works on Unix, is also free, and recovers revision D
boards (both of these can be found at
http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility).
	The new OMAP Flash Recovery Utility, which still works on Windows, is
now licensed (available for a small fee), and recovers both revision C
and D boards (it can be found at
http://www.softwaredesignsolutions.com/).

	You only need to use saveenv if you have changed a u-boot environmental
variable and wish to maintain that new setting after a reboot: it is not
necessary for simply installing u-boot itself.

	-- Matthew

Re: How to recover flash

[Michal Szabat]

Hello.

You can try instruction 
http://omap.spectrumdigital.com/osk5912/factoryconfig/ if you can use 
CodeComposer Studio and Jtag Emulator, or Omap Flash Loader from 
http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility?action=AttachFile&do=get&target=omapfl-1.0.tar.gz 
and Usb cabel A-A. 


----------------------------------------------------------------------
Dzis tez mozesz wygrac playera MP3 >>> http://link.interia.pl/f1947

RE: How to recover flash

[Ishigami, Tatsuya]

Hi

 Please refer the link below.

 http://omap.spectrumdigital.com/osk5912/factoryconfig/ 

 Regards,
 Ishigami

-----Original Message-----
From: Luis Cargnini
Sent: Tuesday, May 30, 2006 5:51 AM
To: OMAP
Subject: How to recover flash

Please I destroyed the flash of my OMAP OSK5912 (dev kit) how to recover the
flash ??
after download the u-boot latest version i must do saveenv before reboot ?

-- 
Thanks && Regards
Msc. Bsc. Luís Vitório Cargnini
IEEE Member
Mastering Degree student @ PUC-RS Electrical Engineer Faculty
_______________________________________________
Linux-omap-open-source mailing list
Linux-omap-open-source@linux.omap.com
http://linux.omap.com/mailman/listinfo/linux-omap-open-source

Re: How to recover flash

[Luís Cargnini]

thanik you all for the ASAP answers, i think that i'll try flash recovery
utility i tried  with code composer studio but without luck, so thanks and
best regards to you all i'll send more if necessary, but the FRU i think it
solve my problems thanks again.

On 5/29/06, Ishigami, Tatsuya <ishigami@ti.com> wrote:
>
> Hi
>
> Please refer the link below.
>
> http://omap.spectrumdigital.com/osk5912/factoryconfig/
>
> Regards,
> Ishigami
>
> -----Original Message-----
> From: Luis Cargnini
> Sent: Tuesday, May 30, 2006 5:51 AM
> To: OMAP
> Subject: How to recover flash
>
> Please I destroyed the flash of my OMAP OSK5912 (dev kit) how to recover
> the
> flash ??
> after download the u-boot latest version i must do saveenv before reboot ?
>
> --
> Thanks && Regards
> Msc. Bsc. Luís Vitório Cargnini
> IEEE Member
> Mastering Degree student @ PUC-RS Electrical Engineer Faculty
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>



-- 
Thanks && Regards
Msc. Bsc. Luís Vitório Cargnini
IEEE Member
Mastering Degree student @ PUC-RS Electrical Engineer Faculty

Re: How to recover flash

[J Yeh]

Is it possible to flash the Uboot boot loader of Rev D OSK5912 without using
the Code Composer or the flash utility that costs $80?

Has anyone successfully used the GPL version of the flash utility found on
this site on Rev D board?  Thanks.

http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility?action=AttachFile&do=get&target=omapfl-1.0.tar.gz

Jason

On 5/30/06, Luís Cargnini <lvcargnini@gmail.com> wrote:
>
> thanik you all for the ASAP answers, i think that i'll try flash recovery
> utility i tried  with code composer studio but without luck, so thanks and
> best regards to you all i'll send more if necessary, but the FRU i think
> it
> solve my problems thanks again.
>
> On 5/29/06, Ishigami, Tatsuya <ishigami@ti.com> wrote:
> >
> > Hi
> >
> > Please refer the link below.
> >
> > http://omap.spectrumdigital.com/osk5912/factoryconfig/
> >
> > Regards,
> > Ishigami
> >
> > -----Original Message-----
> > From: Luis Cargnini
> > Sent: Tuesday, May 30, 2006 5:51 AM
> > To: OMAP
> > Subject: How to recover flash
> >
> > Please I destroyed the flash of my OMAP OSK5912 (dev kit) how to recover
> > the
> > flash ??
> > after download the u-boot latest version i must do saveenv before reboot
> ?
> >
> > --
> > Thanks && Regards
> > Msc. Bsc. Luís Vitório Cargnini
> > IEEE Member
> > Mastering Degree student @ PUC-RS Electrical Engineer Faculty
> > _______________________________________________
> > Linux-omap-open-source mailing list
> > Linux-omap-open-source@linux.omap.com
> > http://linux.omap.com/mailman/listinfo/linux-omap-open-source
> >
>
>
>
> --
> Thanks && Regards
> Msc. Bsc. Luís Vitório Cargnini
> IEEE Member
> Mastering Degree student @ PUC-RS Electrical Engineer Faculty
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>

Re: How to recover flash

[Luís Cargnini]

i did it an hour ago, the onkly thing you must be root to execute the
program, i used it to put my own image based on u-Boot from git tree.

On 5/30/06, J Yeh <jasonyeh0908@gmail.com> wrote:
>
> Is it possible to flash the Uboot boot loader of Rev D OSK5912 without
> using the Code Composer or the flash utility that costs $80?
>
> Has anyone successfully used the GPL version of the flash utility found on
> this site on Rev D board?  Thanks.
>
>
> http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility?action=AttachFile&do=get&target=omapfl-1.0.tar.gz
>
>
> Jason
>
>
> On 5/30/06, Luís Cargnini <lvcargnini@gmail.com> wrote:
> >
> > thanik you all for the ASAP answers, i think that i'll try flash
> > recovery
> > utility i tried  with code composer studio but without luck, so thanks
> > and
> > best regards to you all i'll send more if necessary, but the FRU i think
> > it
> > solve my problems thanks again.
> >
> > On 5/29/06, Ishigami, Tatsuya <ishigami@ti.com> wrote:
> > >
> > > Hi
> > >
> > > Please refer the link below.
> > >
> > > http://omap.spectrumdigital.com/osk5912/factoryconfig/
> > >
> > > Regards,
> > > Ishigami
> > >
> > > -----Original Message-----
> > > From: Luis Cargnini
> > > Sent: Tuesday, May 30, 2006 5:51 AM
> > > To: OMAP
> > > Subject: How to recover flash
> > >
> > > Please I destroyed the flash of my OMAP OSK5912 (dev kit) how to
> > recover
> > > the
> > > flash ??
> > > after download the u-boot latest version i must do saveenv before
> > reboot ?
> > >
> > > --
> > > Thanks && Regards
> > > Msc. Bsc. Luís Vitório Cargnini
> > > IEEE Member
> > > Mastering Degree student @ PUC-RS Electrical Engineer Faculty
> > > _______________________________________________
> > > Linux-omap-open-source mailing list
> > > Linux-omap-open-source@linux.omap.com
> > > http://linux.omap.com/mailman/listinfo/linux-omap-open-source
> > >
> >
> >
> >
> > --
> > Thanks && Regards
> > Msc. Bsc. Luís Vitório Cargnini
> > IEEE Member
> > Mastering Degree student @ PUC-RS Electrical Engineer Faculty
> > _______________________________________________
> > Linux-omap-open-source mailing list
> > Linux-omap-open-source@linux.omap.com
> > http://linux.omap.com/mailman/listinfo/linux-omap-open-source
> >
>
>


-- 
Thanks && Regards
Msc. Bsc. Luís Vitório Cargnini
IEEE Member
Mastering Degree student @ PUC-RS Electrical Engineer Faculty

Re: How to recover flash

[J Yeh]

Interesting, I tried it last night under Ubuntu but it would always return
some erros, which I can't recall as of now.

Can you post which distribution you are running, kernel version number, and
version number of the libusb?

Thanks.

Re: How to recover flash

[Luís Cargnini]

Gentoo Distro - Linux voyager 2.6.16-gentoo-r7 #5 SMP PREEMPT Mon May 15
16:54:13 BRT 2006 i686 Intel(R) Pentium(R) D CPU 3.00GHz GNU/Linux
 *  dev-libs/libusb
      Latest version available: 0.1.12
      Latest version installed: 0.1.12


On 5/30/06, J Yeh <jasonyeh0908@gmail.com> wrote:
>
> Interesting, I tried it last night under Ubuntu but it would always return
> some erros, which I can't recall as of now.
>
> Can you post which distribution you are running, kernel version number,
> and version number of the libusb?
>
> Thanks.
>



-- 
Thanks && Regards
Msc. Bsc. Luís Vitório Cargnini
IEEE Member
Mastering Degree student @ PUC-RS Electrical Engineer Faculty

Re: How to recover flash

[Krzysztof Kaczmar]

On Tue, May 30, 2006 at 05:46:56PM -0500, J Yeh wrote:
> Interesting, I tried it last night under Ubuntu but it would always return
> some erros, which I can't recall as of now.
> 
> Can you post which distribution you are running, kernel version number, and
> version number of the libusb?

Ubuntu Breezy Badger, kernel 2.6.12 and latest libusb for this distro.

-- 
Krzysztof Kaczmar <arroyo@o2.pl>

Re: How to recover flash

[J Yeh]

I got it work!!  I had to press reset after the device is connected to my
computer.

Thanks for all the help.a

Re: How to recover flash

[Krzysztof Kaczmar]

On Tue, May 30, 2006 at 04:52:44PM -0500, J Yeh wrote:
> Is it possible to flash the Uboot boot loader of Rev D OSK5912 without using
> the Code Composer or the flash utility that costs $80?
> 
> Has anyone successfully used the GPL version of the flash utility found on
> this site on Rev D board?  Thanks.
> 
> http://tree.celinuxforum.org/CelfPubWiki/FlashRecoveryUtility?action=AttachFile&do=get&target=omapfl-1.0.tar.gz

Yes, we have rev. D OSK and there was no problem with flashing it with
mentioned tool. Just follow omapfl-1.0/README and it should be OK.

-- 
Krzysztof Kaczmar <arroyo@o2.pl>