From: Ladislav Michl <ladis@linux-mips.org>
To: "Mark A. Greer" <mgreer@animalcreek.com>
Cc: "Kim, Milo" <Milo.Kim@ti.com>,
"tony@atomide.com" <tony@atomide.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: Re: [PATCH] ARM: OMAP AM35x: clockdomain data: fix resolving dependency problem
Date: Sat, 7 Jul 2012 14:41:31 +0200 [thread overview]
Message-ID: <20120707124131.GA9034@localhost.localdomain> (raw)
In-Reply-To: <20120702174138.GA9669@animalcreek.com>
On Mon, Jul 02, 2012 at 10:41:38AM -0700, Mark A. Greer wrote:
> On Mon, Jul 02, 2012 at 05:54:57AM +0000, Kim, Milo wrote:
> > In am35x board , iva2 clock domain doesn't be used.
> > So mpu_am35x_clkdm should be used rather than mpu_3xxx_clkdm.
> > OMAP3430 : mpu_3xxx_clkdm (with iva2 clkdm)
> > AM35x : mpu_am35x_clkdm (without iva2 clkdm)
> >
> > For the compatibility with omap3430, this patch has no conflict because mpu_3xxx_clkdm was already defined in clock domains for omap3430.
> > So this can be removed from common clock domain.
> >
> > Below error can be fixed with this patch.
> >
> > [ 0.000000] AM3517 ES1.1 (l2cache sgx neon )
> > [ 0.000000] ------------[ cut here ]------------
> > [ 0.000000] WARNING: at arch/arm/mach-omap2/clockdomain.c:237 _resolve_clkdm_deps+0x68/0x108()
> > [ 0.000000] clockdomain: mpu_clkdm: could not find clkdm iva2_clkdm while resolving dependencies - should never happen
> > [ 0.000000] Modules linked in:
> > [ 0.000000] [<c001bd3c>] (unwind_backtrace+0x0/0xf4) from [<c0040c2c>] (warn_slowpath_common+0x4c/0x64)
> > [ 0.000000] [<c0040c2c>] (warn_slowpath_common+0x4c/0x64) from [<c0040cd8>] (warn_slowpath_fmt+0x30/0x40)
> > [ 0.000000] [<c0040cd8>] (warn_slowpath_fmt+0x30/0x40) from [<c003256c>] (_resolve_clkdm_deps+0x68/0x108)
> > [ 0.000000] [<c003256c>] (_resolve_clkdm_deps+0x68/0x108) from [<c0032640>] (clkdm_complete_init+0x34/0x90)
> > [ 0.000000] [<c0032640>] (clkdm_complete_init+0x34/0x90) from [<c06d7600>] (omap3_init_early+0x20/0x30)
> > [ 0.000000] [<c06d7600>] (omap3_init_early+0x20/0x30) from [<c06d3230>] (setup_arch+0x834/0x94c)
> > [ 0.000000] [<c06d3230>] (setup_arch+0x834/0x94c) from [<c06cf6b0>] (start_kernel+0x88/0x2fc)
> > [ 0.000000] [<c06cf6b0>] (start_kernel+0x88/0x2fc) from [<80008044>] (0x80008044)
> >
> > Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
> > ---
> > arch/arm/mach-omap2/clockdomains3xxx_data.c | 1 -
> > 1 files changed, 0 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
> > index d625844..56089c4 100644
> > --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
> > +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
> > @@ -454,7 +454,6 @@ static struct clkdm_autodep clkdm_am35x_autodeps[] = {
> >
> > static struct clockdomain *clockdomains_common[] __initdata = {
> > &wkup_common_clkdm,
> > - &mpu_3xxx_clkdm,
> > &neon_clkdm,
> > &core_l3_3xxx_clkdm,
> > &core_l4_3xxx_clkdm,
> > --
> > 1.7.2.5
>
> Hi Milo.
>
> Thanks for the patch but this issue should already be fixed in a patch
> that Tony just made a pull request for
> (http://www.spinics.net/lists/linux-omap/msg73080.html).
>
> >From that email (and branch in the email), look for this patch:
>
> > Mark A. Greer (4):
>
> > ARM: OMAP AM35x: clockdomain data: Fix clockdomain dependencies
>
> Please take a look as another set of eyes never hurts. :)
Hi Mark,
just tested above patch on Technexion's TAM-3517 and it indeed fixes above
warning. Without patch, warning is generated. Tested on Tony's master branch.
ladis
next prev parent reply other threads:[~2012-07-07 12:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-02 5:54 [PATCH] ARM: OMAP AM35x: clockdomain data: fix resolving dependency problem Kim, Milo
2012-07-02 17:41 ` Mark A. Greer
2012-07-07 12:41 ` Ladislav Michl [this message]
2012-07-09 16:16 ` Mark A. Greer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120707124131.GA9034@localhost.localdomain \
--to=ladis@linux-mips.org \
--cc=Milo.Kim@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=mgreer@animalcreek.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox