From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [PATCH v1 18/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 TX/RX registers
Date: Tue, 5 Jul 2022 12:43:10 +0300 [thread overview]
Message-ID: <20220705094320.1313312-19-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220705094320.1313312-1-dmitry.baryshkov@linaro.org>
Split registers definitions belonging allegedly to 4.20 and 5.20 QMP
PHYs. They are used for the PCIe QMP PHYs, which have no good open
source reference.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../phy-qcom-qmp-qserdes-txrx-v4_20.h | 43 +++++++++
.../phy-qcom-qmp-qserdes-txrx-v5_20.h | 60 +++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 88 +------------------
3 files changed, 105 insertions(+), 86 deletions(-)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v4_20.h
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_20.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v4_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v4_20.h
new file mode 100644
index 000000000000..114570f3017f
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v4_20.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V4_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V4_20_H_
+
+/* Only for QMP V4_20 PHY - TX registers */
+#define QSERDES_V4_20_TX_LANE_MODE_1 0x88
+#define QSERDES_V4_20_TX_LANE_MODE_2 0x8c
+#define QSERDES_V4_20_TX_LANE_MODE_3 0x90
+#define QSERDES_V4_20_TX_VMODE_CTRL1 0xc4
+#define QSERDES_V4_20_TX_PI_QEC_CTRL 0xe0
+
+/* Only for QMP V4_20 PHY - RX registers */
+#define QSERDES_V4_20_RX_FO_GAIN_RATE2 0x008
+#define QSERDES_V4_20_RX_UCDR_PI_CONTROLS 0x058
+#define QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE 0x0ac
+#define QSERDES_V4_20_RX_DFE_3 0x110
+#define QSERDES_V4_20_RX_DFE_DAC_ENABLE1 0x134
+#define QSERDES_V4_20_RX_DFE_DAC_ENABLE2 0x138
+#define QSERDES_V4_20_RX_VGA_CAL_CNTRL2 0x150
+#define QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x178
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1 0x1c8
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2 0x1cc
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3 0x1d0
+#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4 0x1d4
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B0 0x1d8
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B1 0x1dc
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B2 0x1e0
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B3 0x1e4
+#define QSERDES_V4_20_RX_RX_MODE_RATE2_B4 0x1e8
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B0 0x1ec
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B1 0x1f0
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B2 0x1f4
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B3 0x1f8
+#define QSERDES_V4_20_RX_RX_MODE_RATE3_B4 0x1fc
+#define QSERDES_V4_20_RX_PHPRE_CTRL 0x200
+#define QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x20c
+#define QSERDES_V4_20_RX_MARG_COARSE_CTRL2 0x23c
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_20.h
new file mode 100644
index 000000000000..86c01104799e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_20.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V5_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V5_20_H_
+
+/* Only for QMP V5_20 PHY - TX registers */
+#define QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
+#define QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_V5_20_TX_LANE_MODE_1 0x78
+#define QSERDES_V5_20_TX_LANE_MODE_2 0x7c
+
+/* Only for QMP V5_20 PHY - RX registers */
+#define QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2 0x008
+#define QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3 0x00c
+#define QSERDES_V5_20_RX_UCDR_PI_CONTROLS 0x020
+#define QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1 0x02c
+#define QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3 0x030
+#define QSERDES_V5_20_RX_RX_IDAC_SAOFFSET 0x07c
+#define QSERDES_V5_20_RX_DFE_3 0x090
+#define QSERDES_V5_20_RX_DFE_DAC_ENABLE1 0x0b4
+#define QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1 0x0c4
+#define QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2 0x0c8
+#define QSERDES_V5_20_RX_VGA_CAL_MAN_VAL 0x0dc
+#define QSERDES_V5_20_RX_GM_CAL 0x0ec
+#define QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4 0x108
+#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1 0x164
+#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2 0x168
+#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3 0x16c
+#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5 0x174
+#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6 0x178
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B0 0x17c
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B1 0x180
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B2 0x184
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B3 0x188
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B4 0x18c
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B5 0x190
+#define QSERDES_V5_20_RX_RX_MODE_RATE2_B6 0x194
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B0 0x198
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B1 0x19c
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B2 0x1a0
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B3 0x1a4
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B4 0x1a8
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B5 0x1ac
+#define QSERDES_V5_20_RX_RX_MODE_RATE3_B6 0x1b0
+#define QSERDES_V5_20_RX_PHPRE_CTRL 0x1b4
+#define QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x1c0
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210 0x1f4
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3 0x1f8
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210 0x1fc
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3 0x200
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210 0x204
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3 0x208
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3 0x210
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3 0x218
+#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3 0x220
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 59510d927fec..1f8684c87c06 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -14,9 +14,11 @@
#include "phy-qcom-qmp-qserdes-com-v4.h"
#include "phy-qcom-qmp-qserdes-txrx-v4.h"
+#include "phy-qcom-qmp-qserdes-txrx-v4_20.h"
#include "phy-qcom-qmp-qserdes-com-v5.h"
#include "phy-qcom-qmp-qserdes-txrx-v5.h"
+#include "phy-qcom-qmp-qserdes-txrx-v5_20.h"
#include "phy-qcom-qmp-qserdes-pll.h"
@@ -108,14 +110,6 @@
#define QSERDES_V3_DP_PHY_STATUS 0x0c0
-
-/* Only for QMP V4_20 PHY - TX registers */
-#define QSERDES_V4_20_TX_LANE_MODE_1 0x88
-#define QSERDES_V4_20_TX_LANE_MODE_2 0x8c
-#define QSERDES_V4_20_TX_LANE_MODE_3 0x90
-#define QSERDES_V4_20_TX_VMODE_CTRL1 0xc4
-#define QSERDES_V4_20_TX_PI_QEC_CTRL 0xe0
-
/* Only for QMP V4 PHY - DP PHY registers */
#define QSERDES_V4_DP_PHY_CFG_1 0x014
#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK 0x054
@@ -127,33 +121,6 @@
#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8
#define QSERDES_V4_DP_PHY_STATUS 0x0dc
-/* Only for QMP V4_20 PHY - RX registers */
-#define QSERDES_V4_20_RX_FO_GAIN_RATE2 0x008
-#define QSERDES_V4_20_RX_UCDR_PI_CONTROLS 0x058
-#define QSERDES_V4_20_RX_AUX_DATA_TCOARSE_TFINE 0x0ac
-#define QSERDES_V4_20_RX_DFE_3 0x110
-#define QSERDES_V4_20_RX_DFE_DAC_ENABLE1 0x134
-#define QSERDES_V4_20_RX_DFE_DAC_ENABLE2 0x138
-#define QSERDES_V4_20_RX_VGA_CAL_CNTRL2 0x150
-#define QSERDES_V4_20_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x178
-#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B1 0x1c8
-#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B2 0x1cc
-#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B3 0x1d0
-#define QSERDES_V4_20_RX_RX_MODE_RATE_0_1_B4 0x1d4
-#define QSERDES_V4_20_RX_RX_MODE_RATE2_B0 0x1d8
-#define QSERDES_V4_20_RX_RX_MODE_RATE2_B1 0x1dc
-#define QSERDES_V4_20_RX_RX_MODE_RATE2_B2 0x1e0
-#define QSERDES_V4_20_RX_RX_MODE_RATE2_B3 0x1e4
-#define QSERDES_V4_20_RX_RX_MODE_RATE2_B4 0x1e8
-#define QSERDES_V4_20_RX_RX_MODE_RATE3_B0 0x1ec
-#define QSERDES_V4_20_RX_RX_MODE_RATE3_B1 0x1f0
-#define QSERDES_V4_20_RX_RX_MODE_RATE3_B2 0x1f4
-#define QSERDES_V4_20_RX_RX_MODE_RATE3_B3 0x1f8
-#define QSERDES_V4_20_RX_RX_MODE_RATE3_B4 0x1fc
-#define QSERDES_V4_20_RX_PHPRE_CTRL 0x200
-#define QSERDES_V4_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x20c
-#define QSERDES_V4_20_RX_MARG_COARSE_CTRL2 0x23c
-
/* Only for QMP V4_20 PHY - USB/PCIe PCS registers */
#define QPHY_V4_20_PCS_RX_SIGDET_LVL 0x188
#define QPHY_V4_20_PCS_EQ_CONFIG2 0x1d8
@@ -176,57 +143,6 @@
#define QPHY_V4_20_PCS_LANE1_INSIG_SW_CTRL2 0x824
#define QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2 0x828
-/* Only for QMP V5_20 PHY - TX registers */
-#define QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
-#define QSERDES_V5_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
-#define QSERDES_V5_20_TX_LANE_MODE_1 0x78
-#define QSERDES_V5_20_TX_LANE_MODE_2 0x7c
-
-/* Only for QMP V5_20 PHY - RX registers */
-#define QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE2 0x008
-#define QSERDES_V5_20_RX_UCDR_FO_GAIN_RATE3 0x00c
-#define QSERDES_V5_20_RX_UCDR_PI_CONTROLS 0x020
-#define QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_0_1 0x02c
-#define QSERDES_V5_20_RX_AUX_DATA_THRESH_BIN_RATE_2_3 0x030
-#define QSERDES_V5_20_RX_RX_IDAC_SAOFFSET 0x07c
-#define QSERDES_V5_20_RX_DFE_3 0x090
-#define QSERDES_V5_20_RX_DFE_DAC_ENABLE1 0x0b4
-#define QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH1 0x0c4
-#define QSERDES_V5_20_RX_TX_ADAPT_POST_THRESH2 0x0c8
-#define QSERDES_V5_20_RX_VGA_CAL_MAN_VAL 0x0dc
-#define QSERDES_V5_20_RX_GM_CAL 0x0ec
-#define QSERDES_V5_20_RX_RX_EQU_ADAPTOR_CNTRL4 0x108
-#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B1 0x164
-#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B2 0x168
-#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B3 0x16c
-#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B5 0x174
-#define QSERDES_V5_20_RX_RX_MODE_RATE_0_1_B6 0x178
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B0 0x17c
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B1 0x180
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B2 0x184
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B3 0x188
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B4 0x18c
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B5 0x190
-#define QSERDES_V5_20_RX_RX_MODE_RATE2_B6 0x194
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B0 0x198
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B1 0x19c
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B2 0x1a0
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B3 0x1a4
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B4 0x1a8
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B5 0x1ac
-#define QSERDES_V5_20_RX_RX_MODE_RATE3_B6 0x1b0
-#define QSERDES_V5_20_RX_PHPRE_CTRL 0x1b4
-#define QSERDES_V5_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x1c0
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE210 0x1f4
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH1_RATE3 0x1f8
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE210 0x1fc
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH2_RATE3 0x200
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE210 0x204
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH3_RATE3 0x208
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH4_RATE3 0x210
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3 0x218
-#define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3 0x220
-
/* Only for QMP V5_20 PHY - PCIe PCS registers */
#define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x01c
#define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS 0x090
--
2.35.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2022-07-05 10:19 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-05 9:42 [PATCH v1 00/28] phy: qcom-qmp: split register tables Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 01/28] phy: qcom-qmp: fix the QSERDES_V5_COM_CMN_MODE register Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 02/28] phy: qcom-qmp-ufs: remove spurious register write in the msm8996 table Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 03/28] phy: qcom-qmp-combo,usb: add support for separate PCS_USB region Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 04/28] phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3 Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 05/28] phy: qcom-qmp: drop special QMP V2 PCIE gen3 defines Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 06/28] phy: qcom-qmp: rename QMP V2 PCS registers Dmitry Baryshkov
2022-07-05 9:42 ` [PATCH v1 07/28] phy: qcom-qmp: use QPHY_V4_PCS for ipq6018/ipq8074 PCIe gen3 Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 08/28] phy: qcom-qmp: move QSERDES registers to separate header Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 09/28] phy: qcom-qmp: move QSERDES V3 registers to separate headers Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 10/28] phy: qcom-qmp: move QSERDES V4 " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 11/28] phy: qcom-qmp: move QSERDES V5 " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 12/28] phy: qcom-qmp: move QSERDES PLL registers to separate header Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 13/28] phy: qcom-qmp: move PCS V2 " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 14/28] phy: qcom-qmp: move PCS V3 registers to separate headers Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 15/28] phy: qcom-qmp: move PCS V4 " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 16/28] phy: qcom-qmp: move PCS V5 " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 17/28] phy: qcom-qmp: move PCIE QHP registers to separate header Dmitry Baryshkov
2022-07-05 9:43 ` Dmitry Baryshkov [this message]
2022-07-05 9:43 ` [PATCH v1 19/28] phy: qcom-qmp: split allegedly 4.20 and 5.20 PCS registers Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 20/28] phy: qcom-qmp: split PCS_UFS V3 symbols to separate header Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 21/28] phy: qcom-qmp: qserdes-com: add missing registers Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 22/28] phy: qcom-qmp: qserdes-com-v3: " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 23/28] phy: qcom-qmp: qserdes-com-v4: " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 24/28] phy: qcom-qmp: qserdes-com-v5: " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 25/28] phy: qcom-qmp: pcs-v3: " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 26/28] phy: qcom-qmp: pcs-pcie-v4: " Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 27/28] phy: qcom-qmp-usb: replace FLL layout writes for msm8996 Dmitry Baryshkov
2022-07-05 9:43 ` [PATCH v1 28/28] phy: qcom-qmp-usb: define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME register Dmitry Baryshkov
2022-07-07 5:02 ` [PATCH v1 00/28] phy: qcom-qmp: split register tables Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220705094320.1313312-19-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=kishon@ti.com \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox