[PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset

[Nitin Rawat <quic_nitirawa@quicinc.com>]

Refactor the UFS PHY reset handling to parse the reset logic only once
during probe, instead of every resume.

Move the UFS PHY reset parsing logic from qmp_phy_power_on to
qmp_ufs_probe to avoid unnecessary parsing during resume.

Co-developed-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 61 +++++++++++++------------
 1 file changed, 33 insertions(+), 28 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 636dc3dc3ea8..12dad28cc1bd 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1799,38 +1799,11 @@ static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
 static int qmp_ufs_power_on(struct phy *phy)
 {
 	struct qmp_ufs *qmp = phy_get_drvdata(phy);
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
 	int ret;
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");

-	if (cfg->no_pcs_sw_reset) {
-		/*
-		 * Get UFS reset, which is delayed until now to avoid a
-		 * circular dependency where UFS needs its PHY, but the PHY
-		 * needs this UFS reset.
-		 */
-		if (!qmp->ufs_reset) {
-			qmp->ufs_reset =
-				devm_reset_control_get_exclusive(qmp->dev,
-								 "ufsphy");
-
-			if (IS_ERR(qmp->ufs_reset)) {
-				ret = PTR_ERR(qmp->ufs_reset);
-				dev_err(qmp->dev,
-					"failed to get UFS reset: %d\n",
-					ret);
-
-				qmp->ufs_reset = NULL;
-				return ret;
-			}
-		}
-	}
-
 	ret = qmp_ufs_com_init(qmp);
-	if (ret)
-		return ret;
-
-	return 0;
+	return ret;
 }

 static int qmp_ufs_phy_calibrate(struct phy *phy)
@@ -2088,6 +2061,34 @@ static int qmp_ufs_parse_dt(struct qmp_ufs *qmp)
 	return 0;
 }

+static int qmp_ufs_get_phy_reset(struct qmp_ufs *qmp)
+{
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	int ret;
+
+	if (!cfg->no_pcs_sw_reset)
+		return 0;
+
+	/*
+	 * Get UFS reset, which is delayed until now to avoid a
+	 * circular dependency where UFS needs its PHY, but the PHY
+	 * needs this UFS reset.
+	 */
+	if (!qmp->ufs_reset) {
+		qmp->ufs_reset =
+		devm_reset_control_get_exclusive(qmp->dev, "ufsphy");
+
+		if (IS_ERR(qmp->ufs_reset)) {
+			ret = PTR_ERR(qmp->ufs_reset);
+			dev_err(qmp->dev, "failed to get PHY reset: %d\n", ret);
+			qmp->ufs_reset = NULL;
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static int qmp_ufs_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -2114,6 +2115,10 @@ static int qmp_ufs_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;

+	ret = qmp_ufs_get_phy_reset(qmp);
+	if (ret)
+		return ret;
+
 	/* Check for legacy binding with child node. */
 	np = of_get_next_available_child(dev->of_node, NULL);
 	if (np) {
--
2.48.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy