[PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()

From: Nitin Rawat <quic_nitirawa@quicinc.com>
To: vkoul@kernel.org, kishon@kernel.org,
	manivannan.sadhasivam@linaro.org,
	James.Bottomley@HansenPartnership.com,
	martin.petersen@oracle.com, bvanassche@acm.org,
	bjorande@quicinc.com, neil.armstrong@linaro.org,
	konrad.dybcio@oss.qualcomm.com
Cc: quic_rdwivedi@quicinc.com, linux-arm-msm@vger.kernel.org,
	linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-scsi@vger.kernel.org,
	Nitin Rawat <quic_nitirawa@quicinc.com>
Subject: [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()
Date: Thu, 10 Apr 2025 14:30:58 +0530	[thread overview]
Message-ID: <20250410090102.20781-6-quic_nitirawa@quicinc.com> (raw)
In-Reply-To: <20250410090102.20781-1-quic_nitirawa@quicinc.com>

Simplify the qcom ufs phy driver by inlining qmp_ufs_com_init() into
qmp_ufs_power_on(). This change removes unnecessary function calls and
ensures that the initialization logic is directly within the power-on
routine, maintaining the same functionality.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 44 ++++++++++---------------
 1 file changed, 18 insertions(+), 26 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 12dad28cc1bd..2cc819089d71 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1757,31 +1757,6 @@ static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg
 	qmp_ufs_init_all(qmp, &cfg->tbls_hs_b);
 }

-static int qmp_ufs_com_init(struct qmp_ufs *qmp)
-{
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	void __iomem *pcs = qmp->pcs;
-	int ret;
-
-	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
-		return ret;
-	}
-
-	ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
-	if (ret)
-		goto err_disable_regulators;
-
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
-
-	return 0;
-
-err_disable_regulators:
-	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
-
-	return ret;
-}

 static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
 {
@@ -1799,10 +1774,27 @@ static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
 static int qmp_ufs_power_on(struct phy *phy)
 {
 	struct qmp_ufs *qmp = phy_get_drvdata(phy);
+	const struct qmp_phy_cfg *cfg = qmp->cfg;
+	void __iomem *pcs = qmp->pcs;
 	int ret;
+
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");

-	ret = qmp_ufs_com_init(qmp);
+	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
+	if (ret) {
+		dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
+	if (ret)
+		goto err_disable_regulators;
+
+	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
+	return 0;
+
+err_disable_regulators:
+	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
 	return ret;
 }

--
2.48.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
