From: Lukasz Luba <lukasz.luba@arm.com>
To: linux-kernel@vger.kernel.org, daniel.lezcano@linaro.org,
rafael@kernel.org
Cc: linux-pm@vger.kernel.org, rui.zhang@intel.com, lukasz.luba@arm.com
Subject: [PATCH 1/7] thermal: gov_power_allocator: Rename trip_max_desired_temperature
Date: Wed, 25 Oct 2023 20:22:19 +0100 [thread overview]
Message-ID: <20231025192225.468228-2-lukasz.luba@arm.com> (raw)
In-Reply-To: <20231025192225.468228-1-lukasz.luba@arm.com>
Refactor the code and drop the long name for the trip point. There is
a comment describing the field properly. Use shorten variable name so that
allow to make the code cleaner a bit.
This change is not expected to alter the general functionality.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
drivers/thermal/gov_power_allocator.c | 40 ++++++++++++---------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 83d4f451b1a97..97a8a6e4e1b0b 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -59,9 +59,8 @@ static inline s64 div_frac(s64 x, s64 y)
* governor switches on when this trip point is crossed.
* If the thermal zone only has one passive trip point,
* @trip_switch_on should be NULL.
- * @trip_max_desired_temperature: last passive trip point of the thermal
- * zone. The temperature we are
- * controlling for.
+ * @trip_max: last passive trip point of the thermal zone. The
+ * temperature we are controlling for.
*/
struct power_allocator_params {
bool allocated_tzp;
@@ -69,7 +68,7 @@ struct power_allocator_params {
s32 prev_err;
u32 sustainable_power;
const struct thermal_trip *trip_switch_on;
- const struct thermal_trip *trip_max_desired_temperature;
+ const struct thermal_trip *trip_max;
};
/**
@@ -93,7 +92,7 @@ static u32 estimate_sustainable_power(struct thermal_zone_device *tz)
struct thermal_cooling_device *cdev = instance->cdev;
u32 min_power;
- if (instance->trip != params->trip_max_desired_temperature)
+ if (instance->trip != params->trip_max)
continue;
if (!cdev_is_power_actor(cdev))
@@ -379,8 +378,7 @@ static int allocate_power(struct thermal_zone_device *tz,
{
struct thermal_instance *instance;
struct power_allocator_params *params = tz->governor_data;
- const struct thermal_trip *trip_max_desired_temperature =
- params->trip_max_desired_temperature;
+ const struct thermal_trip *trip_max = params->trip_max;
u32 *req_power, *max_power, *granted_power, *extra_actor_power;
u32 *weighted_req_power;
u32 total_req_power, max_allocatable_power, total_weighted_req_power;
@@ -390,7 +388,7 @@ static int allocate_power(struct thermal_zone_device *tz,
num_actors = 0;
total_weight = 0;
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
- if ((instance->trip == trip_max_desired_temperature) &&
+ if ((instance->trip == trip_max) &&
cdev_is_power_actor(instance->cdev)) {
num_actors++;
total_weight += instance->weight;
@@ -429,7 +427,7 @@ static int allocate_power(struct thermal_zone_device *tz,
int weight;
struct thermal_cooling_device *cdev = instance->cdev;
- if (instance->trip != trip_max_desired_temperature)
+ if (instance->trip != trip_max)
continue;
if (!cdev_is_power_actor(cdev))
@@ -465,7 +463,7 @@ static int allocate_power(struct thermal_zone_device *tz,
total_granted_power = 0;
i = 0;
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
- if (instance->trip != trip_max_desired_temperature)
+ if (instance->trip != trip_max)
continue;
if (!cdev_is_power_actor(instance->cdev))
@@ -531,13 +529,13 @@ static void get_governor_trips(struct thermal_zone_device *tz,
if (last_passive) {
params->trip_switch_on = first_passive;
- params->trip_max_desired_temperature = last_passive;
+ params->trip_max = last_passive;
} else if (first_passive) {
params->trip_switch_on = NULL;
- params->trip_max_desired_temperature = first_passive;
+ params->trip_max = first_passive;
} else {
params->trip_switch_on = NULL;
- params->trip_max_desired_temperature = last_active;
+ params->trip_max = last_active;
}
}
@@ -556,8 +554,8 @@ static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
struct thermal_cooling_device *cdev = instance->cdev;
- if (instance->trip != params->trip_max_desired_temperature ||
- (!cdev_is_power_actor(instance->cdev)))
+ if (instance->trip != params->trip_max ||
+ !cdev_is_power_actor(instance->cdev))
continue;
instance->target = 0;
@@ -642,12 +640,10 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
get_governor_trips(tz, params);
- if (params->trip_max_desired_temperature) {
- int temp = params->trip_max_desired_temperature->temperature;
-
+ if (params->trip_max)
estimate_pid_constants(tz, tz->tzp->sustainable_power,
- params->trip_switch_on, temp);
- }
+ params->trip_switch_on,
+ params->trip_max->temperature);
reset_pid_controller(params);
@@ -688,7 +684,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz,
* We get called for every trip point but we only need to do
* our calculations once
*/
- if (trip != params->trip_max_desired_temperature)
+ if (trip != params->trip_max)
return 0;
trip = params->trip_switch_on;
@@ -702,7 +698,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz,
tz->passive = 1;
- return allocate_power(tz, params->trip_max_desired_temperature->temperature);
+ return allocate_power(tz, params->trip_max->temperature);
}
static struct thermal_governor thermal_gov_power_allocator = {
--
2.25.1
next prev parent reply other threads:[~2023-10-25 19:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-25 19:22 [PATCH 0/7] Minor cleanup for thermal gov power allocator Lukasz Luba
2023-10-25 19:22 ` Lukasz Luba [this message]
2023-10-25 19:22 ` [PATCH 2/7] thermal: gov_power_allocator: Setup trip points earlier Lukasz Luba
2023-10-25 19:22 ` [PATCH 3/7] thermal: gov_power_allocator: Check the cooling devices only for trip_max Lukasz Luba
2023-10-25 19:22 ` [PATCH 4/7] thermal: gov_power_allocator: Rearrange the order of variables Lukasz Luba
2023-10-25 19:22 ` [PATCH 5/7] thermal: gov_power_allocator: Use shorter variable when possible Lukasz Luba
2023-10-25 19:22 ` [PATCH 6/7] thermal: gov_power_allocator: Remove unneeded local variables Lukasz Luba
2023-10-25 19:22 ` [PATCH 7/7] thermal: gov_power_allocator: Clean needed variables at the beginning Lukasz Luba
2023-10-26 8:54 ` [PATCH 0/7] Minor cleanup for thermal gov power allocator Rafael J. Wysocki
2023-10-26 12:22 ` Lukasz Luba
2023-11-23 15:19 ` Lukasz Luba
2023-11-23 19:50 ` Rafael J. Wysocki
2023-11-24 7:45 ` Lukasz Luba
2023-11-28 15:17 ` Rafael J. Wysocki
2023-11-28 15:32 ` Lukasz Luba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231025192225.468228-2-lukasz.luba@arm.com \
--to=lukasz.luba@arm.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox